Professional Documents
Culture Documents
Set The Units Per The Table Below. Go To The Tools Options and
Set The Units Per The Table Below. Go To The Tools Options and
At the start of the simulation you need to set up EDEM for this simulation. This
requires you to do the following:
Set the units per the table below. Go to the Tools > Options… and
select the Units Tab. Notice that only the units in the table below need
to be changed for this tutorial
The first step is to add the bulk material in the Bulk Material section of the
Creator tree and all materials and interactions between them must be defined.
For this tutorial, we are importing the materials from the Generic EDEM Material
Model (GEMM) database.
1. Open the GEMM Wizard to help you select an appropriate bulk and
equipment material for this simulation. Select the following options for the
particle material.
2. Select the entry highlighted below or a material with the closest match
3. Select Medium Wall friction checkboxes in the inclination Test Details section
to generate Equipment Material
5. Check the materials properties have been populated for each on the Bulk
and Equipment Materials
6. Expand the Particle material section and rename as particle
The interactions between the Bulk Material and Equipment Material have
already been created by the GEMM wizard.
Under the Particle section the Size Distribution is set to normal, and the particle
Properties such as mass, volume and moment of inertia are automatically
calculated. If the GEMM wizard is not used, these interactions, particle
distribution and properties need to be defined manually.
7. Expand the Size Distribution section and set the following Size Distribution
Parameters
Please note that with changing the particle shape and size distribution set by
the GEMM this then impacts on the Bulk Material behavior, the 40 degree angle
of repose chosen via the GEMM wizard will no longer be valid for the modified
particle material.
Step 3: Creator – define the CAD geometry
The SAG mill geometry has already been created in a CAD package and is
ready to be imported into EDEM.
Download the SAG mill geometry file. stl and import it (for EDEM
Classroom users, import the file SAG_Mill_Reduced_Mesh.stl).
Select the Geometries Section in the EDEM Creator tree and Import
the CAD model in Millimetres, and check the Merge Sections check
box.
When the Geometry Import Parameters dialog appears de-select
‘Repair’, Transform/Defeature’ and ‘Flavoring’, leave the other
settings as default and select OK.
Rename the geometry as Mill and check in the general section that
the Material is set to Steel and Type is set to Physical
We are using 65% of the critical speed of this drum that is 1.3 rad/s. To simulate
the mill rotation, you need to define the motion by using the Linear
Rotation kinematics.
Select the Mill geometry and under Add kinematics select Add
Linear Rotation
Set the start time of the rotation to 1s, this will allow the particles to
settle in the mill
Modify initial velocity to 1.03 rad/s and define the axis of rotation as
shown below
Step 5: Creator – create the particle factory geometry and set the factory parameter
To get the bulk material into the simulation you need to create a particle factory.
This particle factory is used to define where, when and how particles appear in
your simulation.
Set the Factory Type to Virtual as the object is not a physical part of
the machinery
Expand the factory geometry section and set the Cylinder
dimensions as per image below
Click on the Factory section and select Add Factory. The table
below shows the factory parameters for your simulation. The Material
will automatically default to the only Bulk Material created in this
simulation (Particle Material)
Step 6: Creator – define the physics
The Physics section lists available contact models for the simulation. A contact
model describes how elements behave when they come into contact with one
another.
For this simulation, you will add wear calculations to the Hertz-Mindlin Model,
that will allow you to investigate cumulative energy on the equipment. Higher
energy values indicate the potential for higher wear.
Select the Hertz-Mindlin for the Particle to Particle
interaction, remove the GEMM particle Cohesive Interactions and add
in the Particle Material interactions with ‘0’ Surface energy value.
The domain (illustrated by the red box) is the area in which simulation will take
place. For this simulation, we are going to decrease the domain in order to
reduce simulation time by selecting the specific area of interest. Note that
particles can NOT be created outside the domain.
Decrease the Domain with the values shown below
Once the model has been set-up in the Creator we move to the Simulator to run
it.
The Analyst section is used to review, examine and analyze the results of the
simulation. The relative wear analysis in EDEM is based on cumulative contact
energy on specific mesh elements of the mill.
Under setup selections click on Add Selection and choose Imported Geometry
Bin Group
Set Display Mode to Always, List Order to Natural, and the Position
section to Mill as shown in the image below, to see the relative wear
changes on the mill
Import the geometry bin group (file: SAG_Mill_bins ), and set the
units of measurement to Millimeters. When the Geometry Import
Parameters dialog appears leave all the settings at the default values
and click OK.
Generate a query under the Options section to track the mass of
particles collected in the bin, and set Query Type to Total as shown
below
Select the Imported Geometry Bin Group 01 in the Analyst Tree, and
click the Edit button on the Representation section
Click the Create Graph button in the toolbar and set the Histogram tab with the
following parameters:
Select the Attribute for the X-axis and Y-axis tabs as Relative
Velocity (magnitude) and Number of Collisions (Total) respectively
Click the Settings tab and uncheck Current Time Step box.
Enable the User Defined checkbox, then set the X-axis Min Value to
2 m/s
Click Create Graph to plot a new representation