Professional Documents
Culture Documents
for
180 TEACHING-LEARNING DAYS
SY 2014-2015
(FIRST QUARTER)
Day Competencies Instructional Materials/
References
JUNE
3 Test Questionnaire/LM in
Pre-test Mechanical Drafting
4 Lesson 1
10 LO2. Request, receive, inspect and store drafting materials and tools.
LM in Mech. Drafting page 23
Procedures in receiving and storing tools and materials
11 LO2. Request, receive, inspect and store drafting materials and tools.
LM in Mech. Drafting pp: 23-28
Different requisition forms and procedures
1
12
13 LESSON 2:
Measuring Instruments/ LM pp:
LO1. Select and use measuring instruments. 34-38
Identifying the different measuring instruments
16 LO1. Select and use measuring instruments.
Measuring Instruments/ LM
Observing proper use of measuring instruments pp:34-38
2
JULY
1 LO4. Convert English to metric measurement system and vice versa Learning Module in Mech.
Drafting pp: 63
Conversion Formulas (English to Metric and vice versa)
3
15 LO1.Identify assembly and detailed drawing.
Actual Tools/Learning Module in
Orthographic Projection Mech. Drafting pp: 89-94
28
29 LO1. Identifying assembly and detailed drawing
Actual Tools/Learning Module in
Assembly and detailed drawing Mech. Drafting pp: 52-53
30 LESSON 4:
Power point Presentation
LO1.Identifying hazardous area /Learning Module in Mech.
Drafting pp: 136-141
31 LO1.Identifying hazardous area Power point
presentation/Learning Module in
Mech. Drafting pp: 143-155
4
AUGUST
1 LO2. Use personal protective clothing and devices Power point Presentation
/Learning Module in Mech.
Drafting pp: 159-161
4 REVIEW
8 1stQuarterly Test
11 NOTE:
This competencies allocation in Mechanical drafting will be use for the
succeeding quarters.
5
K to 12 CURRICULUM
KAREN D. COSTOYA
JEANALYN L. JAMISON
Head TLE Department
MELGAR B CORONEL
EPS I-EPP/TLE