Professional Documents
Culture Documents
CBLM Smaw Plates 1g 4g PDF
CBLM Smaw Plates 1g 4g PDF
Plan
Training
Session
3 | S hi e l de d M e t a l A rc We l di n g ( S M AW )
I.Learn Center Philippines
When you have completed this module and feel confident that you
have had sufficient practice, tell your trainer that you are ready for
assessment. He will arrange an appointment with a registered
assessor to assess you. The results of your assessment will be
recorded in your competency Achievement Record.
4 | S hi e l de d M e t a l A rc We l di n g ( S M AW )
I.Learn Center Philippines
Name of
Trainee:
Qualification
Title: SHIELDED METAL ARC WELDING NC II
Characteristics of Learners
English Math
a. None
b. Asthma
c. Heart disease
d. Anemia
e. Hypertension
f. Diabetes
g. Others(please specify)
___________________
Previous experience
with the topic
Training Level
Other courses related to Shielded Metal
Arc Welding
Special Courses
a. Financially challenged
b. Working student
Other needs
CAN I ?...
YES NO
CORE COMPETENCIES
Current
Proof/Evidence Means of Validating
Competencies
9 | S hi e l de d M e t a l A rc We l di n g ( S M AW )
I.Learn Center Philippines
Check authenticity of
certificate of
achievement
Weld Carbon
Certificate of Performed tasks
Steel Plates
achievement correctly according to
Using SMAW
standard operating
procedure through
Institutional evaluation
Weld Carbon
Steel Pipes
Using SMAW
Name of Trainee:
Required Units of
Competency / Current Training Gaps/
Learning Outcomes Competencies Requirements
based on CBC
1. Welding
1. Weld Carbon Steel Carbon Steel
Plates Using SMAW Plates Using
SMAW
1.1 Perform Root
1.1 Perform Root pass
pass
1.2. Clean Root
1.2. Clean Root Pass
Pass
1.3 Weld 1.3. Weld
Subsequent/Filling Subsequent/Fillin
passes g passes
1.4. Perform
1.4 Perform capping
capping
2. Weld Carbon
2. Weld Carbon Steel
Steel Pipes Using
Pipes Using SMAW
SMAW
2.1 Perform Root
2.1 Perform Root pass
pass
Qualification Title:
Name of Trainee: Shielded Metal Arc
Welding NCII
11 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
Module Title /
Training Needs ( Learning
Module of
Outcomes)
Instruction
L.O.1 Weld carbon steel plates in flat
position (1G)
L.O.2 Weld carbon steel plates in horizontal
position (2G) 2. Weld Carbon Steel
L.O.3 Weld carbon steel plates in vertical Pipes Using SMAW
position (3G)
L.O.4 Weld carbon steel plates in overhead
position (4G)
L.O.1 Weld Carbon Steel Pipes In
Horizontal Position (2G)
L.O.2 Weld Carbon Steel Pipe In Fixed Pipe, 2. Weld Carbon Steel
Horizontal Position (5G)
L.O.3 Weld carbon steel pipes in fixed pipe,
Pipes Using SMAW
LIST OF COMPETENCY
Unit of Module
No. Code
Competency Title
Performing
groove
Weld Carbon welding on
1 MEE721306
Steel Plates carbon
steel
plates
Performing
groove
Weld Carbon
2 welding on MEE721306
Steel Pipes
carbon steel
plates
13 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
MODULE CONTENT
NOMINAL DURATION:
INTRODUCTION:
This module covers the skills, knowledge and attitude required
in welding carbon steel plates in different positions such as 1G, 2G,
3G, & 4G using SMAW process.
LEARNING OUTCOMES:
1. Weld carbon steel plates in flat position (1G)
2. Weld carbon steel plates in horizontal position (2G)
3. Weld carbon steel plates in vertical position (3G)
4. Weld carbon steel pates in overhead position (4G)
ASSESSMENT CRITERIA:
1. Instructions for the preparation of the work activity are communicated
and confirmed to ensure clear understanding.
14 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CONTENTS:
1. Preparation of base plate
2. Welding carbon steel plate in Flat position
ASSESSMENT CRITERIA:
1. Root penetration not exceeding allowable tolerances specified by
welding codes/standards on; concavity, convexity, undercut, excess
penetration, lack of fusion, burn-through and cracks.
2. Weld capping/final pass not exceeding allowable tolerances specified
by welding codes/standards on; height of reinforcement, under fill,
porosities, undercut, cracks and cold laps.
3. Uniformity of bead ripples must be in accordance with welding
standards.
4. Stringer or layered beads deposited in accordance with welding
standards.
5. Finish weldment visually acceptable in accordance with welding
15 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CONDITIONS:
Students/trainees must be provided with the following:
1. WORKPLACE
2. TOOLS, ACCESSORIES AND SUPPLIES
Welding mask, electrodes, steel brush, clear and dark glass, chipping
hammer, mechanical pliers.
3. EQUIPMENT
Welding machine (AC or AC/DC), welding table, portable grinder,
Welding booth, portable oven
4. TRAINING MATERIALS
Competency Based Learning Material on SMAW NCII
ASSESSMENT METHODS:
Direct observation
Visual examination of plates
16 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
Learning Experiences
Assessment Method:
1. Observation
2. Examination of plates
19 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CRITERIA
YES NO
Is your response is
satisfactory?
Direction: Answer the following questions
briefly. Compare your response to the
Satisfactory Satisfactory
model answer provided. Tick on the box to
indicate whether your response is
satisfactory or not satisfactory based on
your own judgment.
20 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CONTENTS:
1. Preparation of base plate
2. Welding carbon steel plate in Horizontal position
ASSESSMENT CRITERIA:
1. Root penetration not exceeding allowable tolerances specified by
welding codes/standards on; concavity, convexity, undercut, excess
penetration, lack of fusion, burn-through and cracks.
2. Weld capping/final pass not exceeding allowable tolerances specified
by welding codes/standards on; height of reinforcement, under fill,
porosities, undercut, cracks and cold laps.
3. Uniformity of bead ripples must be in accordance with welding
standards.
4. Stringer or layered beads deposited in accordance with welding
standards.
5. Finish weldment visually acceptable in accordance with welding
21 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CONDITIONS:
Students/trainees must be provided with the following:
1. WORKPLACE
2. TOOLS, ACCESSORIES AND SUPPLIES
Welding mask, electrodes, steel brush, clear and dark glass, chipping
hammer, mechanical pliers.
3. EQUIPMENT
Welding machine (AC or AC/DC), welding table, portable grinder,
Welding booth, portable oven
4. TRAINING MATERIALS
Competency Based Learning Material on SMAW NCII
ASSESSMENT METHODS:
Direct observation
Visual examination of plates
LEARNING ACTIVITIES
Horizontal Welding
Assessment Method:
1. demonstration
2. observation
25 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CRITERIA
YES NO
Is your response
is satisfactory?
Direction: Answer the following questions
briefly. Compare your response to the model
Satisfactory Satisfactory
answer provided. Tick on the box to indicate
whether your response is satisfactory or not
satisfactory based on your own judgment.
26 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CONTENTS:
1. Preparation of base plate
2. Welding carbon steel plate in Vertical position
ASSESSMENT CRITERIA:
1. Root penetration not exceeding allowable tolerances specified by
welding codes/standards on; concavity, convexity, undercut, excess
penetration, lack of fusion, burn-through and cracks.
2. Weld capping/final pass not exceeding allowable tolerances specified
by welding codes/standards on; height of reinforcement, under fill,
porosities, undercut, cracks and cold laps.
3. Uniformity of bead ripples must be in accordance with welding
standards.
4. Stringer or layered beads deposited in accordance with welding
standards.
5. Finish weldment visually acceptable in accordance with welding
standards on; spatters, arc strikes; slag; uniformity of beads.
27 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CONDITIONS:
Students/trainees must be provided with the following:
1. WORKPLACE
2. TOOLS, ACCESSORIES AND SUPPLIES
Welding mask, electrodes, steel brush, clear and dark glass, chipping
hammer, mechanical pliers.
EQUIPMENT
Welding machine (AC or AC/DC), welding table, portable grinder,
Welding booth, portable oven
4. 4. TRAINING MATERIALS
Competency Based Learning Material on SMAW NCII
ASSESSMENT METHODS:
Direct observation
Visual examination of plates
LEARNING ACTIVITIES
Vertical Welding
There are two basic techniques for performing welds in the vertical
position. These two techniques are commonly referred to as “vertical
up” and “vertical down.” These two techniques can be used to perform
welds in the 3G and 3F positions.
The following is a set of instructions for performing “vertical up”
and “vertical down” welds. For most welders, light metal is easier to
weld than heavy metal because it requires less penetration.
29 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
When welding “vertical up”, position the electrode 85º to the plate
in the path of the weld. Begin at the bottom of the plate and work up.
Use the same procedures if the electrode sticks or burns through the
metal.
30 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
As with fillet welds, “vertical up” and “vertical down” welds will
need more than one pass. A root pass should be made, along with a
filler and cap pass.
31 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
es/Materials :Electrode, welding mask, clear and dark glass, chipping hammer,
steel brush, mechanical pliers
Welding machine (AC or AC/DC), welding table, portable grinder,
welding booth, portable oven
Steps/Procedure:
1. Wear PPE
2. Prepare the base metal.
3. Place the base metal in a vertical position
4. Turn on the welding machine
5. Perform welding of carbon steel plates in vertical position
6. turn off the welding machine
Assessment Method:
1. demonstration
2. observation
32 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CRITERIA
YES NO
Is your response
is satisfactory?
Direction: Answer the following questions
briefly. Compare your response to the model
Satisfactory Satisfactory
answer provided. Tick on the box to indicate
whether your response is satisfactory or not
satisfactory based on your own judgment.
CONTENTS:
1. Preparation of base plate
2. Welding carbon steel plate in Vertical position
ASSESSMENT CRITERIA:
1. Root penetration not exceeding allowable tolerances specified by
welding codes/standards on; concavity, convexity, undercut, excess
penetration, lack of fusion, burn-through and cracks.
2. Weld capping/final pass not exceeding allowable tolerances specified
by welding codes/standards on; height of reinforcement, under fill,
porosities, undercut, cracks and cold laps.
3. Uniformity of bead ripples must be in accordance with welding
standards.
4. Stringer or layered beads deposited in accordance with welding
standards.
5. Finish weldment visually acceptable in accordance with welding
standards on; spatters, arc strikes; slag; uniformity of beads.
CONDITIONS:
Students/trainees must be provided with the following:
1. WORKPLACE
34 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
ASSESSMENT METHODS:
Direct observation
Visual examination of plates
LEARNING ACTIVITIES
Overhead Welding
Assessment Method:
1. demonstration
2. observation
38 | S h i e l d e d M e t a l A r c W e l d i n g ( S M A W )
I.Learn Center Philippines
CRITERIA
YES NO
Is your response
is satisfactory?
Direction: Answer the following questions
briefly. Compare your response to the model
Satisfactory Satisfactory
answer provided. Tick on the box to indicate
whether your response is satisfactory or not
satisfactory based on your own judgment.