Professional Documents
Culture Documents
Qualification : SMAW NC II
Learning Outcomes:
A. Introduction
This module covers the knowledge, skills and attitude in performing groove welding on carbon steel pipes in
different positions such as, 2G, 5G, & 6G
B. Learning Activities:
LO1. Weld carbon steel pipes in horizontal position (2G)
Acceptable weld Group Read information sheets Answer self Check Information
profiles Discussion 2.1-3 check 2.1-3 Answers with sheets 2.1-
Acceptable weld profiles answer key 3
Modular
2.1-3
LO2. Weld carbon steel pipes in Fixed pipe horizontal position (5G)
Acceptable weld Group Read information sheets Answer self Check Information
profiles Discussion 2.2-3 check2.2-3 Answers with sheets
Acceptable weld profiles answer key
Modular
2.2-3
Group Read information Answer self Check Information
Weld defects, Discussion sheets 2.2-4 check 2.2-4 Answers with sheets
causes and answer key
remedies Modular Perform job Performanc
2.1-4
sheet 2.2-4 e sheet
demonstration
Performance
Manuals
checklist 2.2-
4 Supplies &
materials,
tools &
equipment
Welding Read Information Sheet
Group Answer self Check information
Procedure 2.2-5
Discussion check 2.2-5 Answers with sheets
Specifications Welding Procedure answer key
(WPS) Modular Specifications (WPS) 2.2-5
LO3. Weld carbon steel pipes in fixed pipe, inclined at 45 position (6G)
Acceptable weld Group Read information sheets Answer self Check Information
profiles Discussion 2.3-3 check 2.3-3 Answers with sheets
Acceptable weld profiles answer key
Modular
2.3-3
Group Read information Answer self Check Information
Weld defects, Discussion sheets 2.3-4 check 2.3-4 Answers with sheets
causes and answer key
remedies Modular Perform job Performanc
2.3-4
sheet 2.3-4 e sheet
demonstration
Performance
Manuals
checklist 2.3-
4 Supplies &
materials,
tools &
equipment
Welding Read Information Sheet
Group Answer self Check Information
Procedure 2.3-5
Discussion check 2.3-5 Answers with sheets
Specifications Welding Procedure answer key
(WPS) Modular Specifications (WPS) 2.3-5
C. Assessment Plan:
Oral questioning/Interview
Performance Test
Self Check
Prepared by:
ROBERTO S. BOLASOC
Trainor