Professional Documents
Culture Documents
SITE LOCATION:
CONTRACT PACKPAGE:
MAIN SUMMARY
ITEM NO. DESCRIPTION
1 General Requirements
2 Site Construction
3 Concrete
4 Masonry
5 Metals
8 Doors and Windows
9 Finishes
10 Specialties
NOTES
>The Plans, Detailed Drawings, Specifications, Detailed Bill of Quantities, Terms of Reference, Contract Agreement and ot
complementing each other, so that what is mentioned or shown in one, although not mentioned in the other, shall be consi
between the two, the same should be referred to the Designing Architect/Engineer for resolution with the aproval of the He
>The construction shall be finished with first class workmanship to the satisfaction of the Head of Procuring Entity.
>The items, description and quantities given on the first three columns of the Bill of Quantities /Bid Form, guides only to th
technical specifications. The owner is not responsible for any mistakes, inaaccuracies, duplications, or omissions in these
never be a basis for additions nor deletions to the scope of work. Only the entries of the Bidder on the last three columns
the plans and technical specifications and his unit cost and corresponding sums shall be considered.
>The unit and total bid prices must include all direct and indirect cost/expenses such as overhead, contingencies and misc
other obligations of any kind under which the contract must be borne by the Bidder since they are necessary to install, con
accordance with the bid documents.
>The Grand Total Cost shall include the supply, delivery, installation of materials, labor, construction supervision and equip
equipment by the contractor.
BILL OF QUANTITIES
ITEM NO. DESCRIPTION QUANTITY
1 GENERAL REQUIREMENTS
Other work items not mentioned in item 1.0 but necessary to complete the
General Requirements (bidders to specify):
2 SITE CONSTRUCTION
2.3 Earthwork
2.3.3 Excavation
2.3.4 Disposal and Hauling
2.3.5 Backfilling
2.3.6 Gravel Bedding
2.3.7 Soil Treatment
Other work items not mentioned in item 2.0 but necessary to complete the Site
Construction (bidders to specify):
3 CONCRETE
Other work items not mentioned in item 3.0 but necessary to complete the
Concrete (bidders to specify):
4 MASONRY
Other work items not mentioned in item 4.0 but necessary to complete the
Masonry (bidders to specify):
5 METALS
Other work items not mentioned in item 5.0 but necessary to complete the
Metals (bidders to specify):
8.1.1
fully-welded, 1.6mm thk gauge 16 x 45mm x 140mm single rebate, hollow
metal frames of the same door panel material; complete with hardware
and accessories
8.1.1 overall dimension 1800mmW x 2100mmH
8.5 Windows
W-1; aluminum framed fixed glass panels with seamless type awning
windows, 6mm thk tempered reflective "smoke grey" fixed glass with
seamless type awning windows on a million type aluminum framing
system in white analok finish complete with hardware and accessories.
8.5.1 overall dimension 1655mmW x 2300mmH
W-2; aluminum framed fixed glass panels with seamless type awning
windows, 6mm thk tempered reflective "smoke grey" fixed glass with
seamless type awning windows on a million type aluminum framing
system in white analok finish complete with hardware and accessories.
8.5.2 overall dimension 1655mmW x 2100mmH
W-3; aluminum framed fixed glass panels with seamless type awning
windows, 6mm thk tempered reflective "smoke grey" fixed glass with
seamless type awning windows on a million type aluminum framing
system in white analok finish complete with hardware and accessories.
8.5.3 overall dimension 2832mmW x 2700mmH
W-4; aluminum framed fixed glass panels with seamless type awning
windows, 6mm thk tempered reflective "smoke grey" fixed glass with
seamless type awning windows on a million type aluminum framing
system in white analok finish complete with hardware and accessories.
8.5.4 overall dimension 1100mmW x 1350mmH
W-5; aluminum framed fixed glass panels with seamless type awning
windows, 6mm thk tempered reflective "smoke grey" fixed glass with
seamless type awning windows on a million type aluminum framing
system in white analok finish complete with hardware and accessories.
8.5.5 overall dimension 900mmW x 600mmH
Other work items not mentioned in item 8.0 but necessary to complete the
Doors and Windows (bidders to specify):
9 FINISHES
9.1 Tiles
600mm x 600mm Polished Homogenous Tiles (FF-1)
9.1.1 to floors
300mm x 600mm Polished Homogeneous Tiles (FF-2)
9.1.2 to floors
300mm x 300mm Non-skid Homogenous Tiles (FF-3)
9.1.3 to floors
Anti-static vinyl tile (FF-4)
9.1.4 to floors
Carpet Tiles with wood baseboard (FF-5)
9.1.5 to floors
300mm x 300mm Glazed Ceramic Tile (WF-3)
9.1.6 to walls
9.5 Ceilings
9.5.1 Suspended Ceilings
12mm thk gypsum board in flat paint finish on standard metal furring
spaced @600mm x 600mm o.c. b.w. (CF-1)
9.5.1.1 to ceiling
12mm thk moisture resistant gypsum board in flat paint finish on
standard metal furring spaced @600mm x 600mm o.c. b.w. (CF-2)
9.5.1.2 to ceiling
600mm x 1200mm x 15mm acoustic board on standard T-runner and
wall angle (CF-3)
9.5.1.3 to ceiling
9.6 Flooring
Straight to finish concrete with floor hardener (FF-6)
9.6.1 to floors
Other work items not mentioned in item 9.0 but necessary to complete the
Finishes (bidders to specify):
10 SPECIALTIES
10.1 Partitions
LP-1; 100mm thk x 1250 panel width maximum, fixed partition made up of
16mm thk mdf board in aluminum-steel frame construction, with free
oscillating panels fixing and aluminum profile with integrated magnetic strip
sealing lips,
10.1.1 overall dimension 6425mmW x 2400mmH
LP-2; 100mm thk x 1250 panel width maximum, fixed partition made up of
16mm thk mdf board in aluminum-steel frame construction, with free
oscillating panels fixing and aluminum profile with integrated magnetic strip
sealing lips,
10.1.2 overall dimension 1200mmW x 2400mmH
FW-1; 12mm thk tempered clear partition w/ "white" decorative frosted
sticker fil applied on both sides
10.1.3 overall dimension 5420mmW x 2400mmH
FW-2; 12mm thk tempered clear partition w/ "white" decorative frosted
sticker fil applied on both sides
10.1.4 overall dimension 5425mmW x 2400mmH
FW-3; 12mm thk tempered clear partition w/ "white" decorative frosted
sticker fil applied on both sides
10.1.5 overall dimension 3058mmW x 2400mmH
of Procuring Entity.
Bid Form, guides only to the owner/bidder interpreting the plans and
ons, or omissions in these list of the Bill of Quantities/Bid Form which shall
on the last three columns consisting of his own take off quantities from
ered.
ad, contingencies and miscellaneous (OCM); profit; value added tax and
re necessary to install, construct and complete the whole of the contract in
ES
QUANTITY UNIT UNIT COST TOTAL COST
1 lot 0 0
1 lot
1 lot
1 lot
0 0
1 lot
1 lot
1 lot
1 lot
1 lot 0 0
1 lot
1 lot 0 0
1 lot
0 0
1 lot
By Owner
By Owner
1 lot
1 lot 0 0
1 lot
By Owner
1 lot 0 0
1 lot 0 0
1 lot 0 0
m3
m3
m3
m3
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m
m
m
m
m
m
m
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
nr
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
nr
nr
nr
nr
nr