Professional Documents
Culture Documents
PROFILE
Adroit & Dynamic Chemical Engineer with about 11.2 years of extensive experience in Process Engineering &
Process control; Process Simulation-OTS, P&ID & controls validation along with Process Operations &
Commissioning of Alumina Refinery predominantly in Red area, seeking a career in the field of Process
Engineering/Process Control where my technical, analytical, managerial skills and experience are fully utilized,
contributing towards the organizational and personal development.
PROFESSIONAL SYNOPSIS
April’2016- Present
Senior Process Engineer at ANDRITZ Technologies, Chennai/Kolkata
Lead process Engineer, Methanol Purification: Principally accountable for H&MB for overall circuit; P&ID
revisions; preparing datasheets & sizing of critical equipment such as distillation & extraction columns
(Sulphur column, Oil stripping & extraction column, Acetone/Methanol/Ethanol Column e.t.c.); Major
pumps and pipe/nozzle sizing along with start-up, commissioning & controls strategy of the entire plant.
Apart from this, supporting sales cases for the detailed cost estimation of the plant (CAPEX & OPEX).
Project Handling: Sodra Cell, Monsteras at Sweden.
R&D in Methanol Purification: Development of Methanol purification technology as process technologist;
seeking the feasibilities to remove sulphur and nitrogen from Raw Methanol, generated as consequence of
Evaporation/Digestion of Black liquor & improving of Methanol purity to IMPCA standard with
optimizing yield for commercial sale; Freezing the scheme for overall circuit with proper selection of unit
operation and unit process on the basic of lab/pilot plant analysis & optimization of the streams with
simulation tool such Aspen plus/ChemCAD along with finalizing the break-even between Capex & Opex.
Guarantee Test Run, Evaporation plant: Participated in Guarantee run of Evaporation plant to analyse the
process data against the designed (guaranteed) values and troubleshooting the process parameters having
variance, vapour sample analysis to determine the segregation coefficient in lamella evaporators.
Project Handled: Sodra Cell, Morrum at Sweden.
Process Engineer, Stripping and Methanol Liquefaction Plant: Guarantee prediction for Methanol with
other volatiles along with COD prediction for the different qualities of condensates produced from
evaporators; H&M balance for stripper & Methanol circuit in addition to preparation of datasheets for
stripping and Methanol column, sizing of columns & heat exchangers (preliminary), sizing & selection of
pumps & valve, pipe sizing; commissioning and start-up & Hazop of Methanol liquefaction plant.
Project Handled: Sodra Cell, Morrum at Sweden.
H&MB & Methanol Balance for Evaporators: Carrying Heat & Mass Balance for evaporators with
performance prediction for condensate quality with rigorous methanol/other volatiles balance in vapour in
addition to Sulphur/Nitrogen estimation in the Non-condensable gases. In addition, improving condensate
quality with duct stripper and optimizing segregation in lamella.
Projects Handled: GP Foley, GA (USA); Mondi Steti (Czech); Ence Navia (Spain)
Equipment Handled: Digesters♦ Evaporators♦ Centrifuge♦ Barometric Condenser ♦Plate heat Exchangers & Shell
and Tube Heaters♦ Hydro Cyclones♦ Cooling towers♦ Centrifugal Pumps♦ Vacuum pumps♦ Crystallizers