Professional Documents
Culture Documents
U.S.A. Canada
Henkel Corporation Henkel Canada Corporation
Henkel Corporation Engineering Adhesives Engineering Adhesives
One Henkel Way 2225 Meadowpine Blvd.
Engineering Adhesives Rocky Hill, Connecticut 06067 Mississauga, Ontario L5N 7P2
Tel: 1.800.LOCTITE (562.8483) Tel: 1.800.263.5043 (within Canada)
www.henkelna.com/industrial Tel: 860.571.5100 Tel: 905.814.6511
www.instant.loctite.com Fax: 860.571.5465 Fax: 905.814.5391
Kevlar is a registered trademark of E. I. du Pont de Nemours and Company. Lexan is a registered trademark of General Electric Company. Except as otherwise
noted, all marks used in LT-LT-4435 are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® = registered in
the U.S. Patent and Trademark Office. © Henkel Corporation, 2010. All rights reserved. 6404/LT-4435 (2/10)
2
N E W SOL U TI ON S
STRONGER SOLUTIONS
for challenging
environments
n NSF Approval
n Excellent peel, impact and n EPDM to brass or aluminium –
shear strength Plumbing connections
Loctite® 410™ n High viscosity
n Excellent resistance in humid and/or
Prism® Instant Adhesive n Color: Black
n Aluminium to PC/ABS blend –
chemical environments Handheld electronics
Loctite® 426™ n Gel n Color: Black n Designed to bond plastics, elastomers n ABS to chrome – Faucets
Prism® Instant Adhesive n Suitable for porous and metals
surfaces and vertical or n Nylon to ABS – Brush to handle
overhead applications
n Ferrite magnets to ABS – Electric toothbrushes
n Surface insensitive for faster cure on a
Zinc plating to polyester – Speaker components
Loctite® 435™
n
n Low viscosity wide variety of materials
Prism® Instant Adhesive n Color: Clear n Good impact, fracture toughness, n Polycarbonate to glass – Fiber-optic connectors
peel and shear strength n ABS to ABS – Key fobs
Loctite® 438™ n Low viscosity n Good chemical, humidity, thermal and
Prism® Instant Adhesive n Color: Black n Rubber to ABS – Model cars
shock resistant
n Fast fixture Rubber to metal – Tacking O-rings in metal
n Designed to bond plastics, elastomers n
IMPROVED
FORMULAS TOUGHENED THERMAL T op featu res substr ates/ applications
n Low viscosity
& Loctite® 4203
NEW VED Prism® Instant Adhesive
™
n Color: Clear
n New and improved – faster curing
O
n Plastic to metal housings – Electric motors
IMPR n Close fitting parts
formulas
n Nylon to aluminium – Kitchenware
n Surface insensitive for faster cure on a
& Loctite® 4204
™ Medium viscosity
n
wide variety of materials Rubber to Fiberglass – Boat components
NEW, VED Prism® Instant Adhesive
n
O
IMPR
n Color: Clear
n Excellent hot strength and heat n Neoprene to Kevlar® – Military devices
aging capabilities up to 250°F
& Loctite® 4205
NEW VED Prism® Instant Adhesive
™ n Gel n Color: Clear n Lexan® to metal and plastic – Microelectronics
R O n Suitable for porous Excellent resistance to impact and
IMP
n
surfaces and vertical or n Buna N rubber to metal – Gasket bonding
peel loads
overhead applications
3 www.instant.loctite.com
BONDING SOLUTIONS
6
FASTER SOLUTIONS
NEW AND
IMPROVED LIGHT CURING T op features substr ates/ applications
n Extremely fast tack-free curing
Loctite® 4306™ n Wicking in 2 - 5 seconds
Flashcure® Light Cure
n Color: Clear to pale green n Stainless steel to plastic – Needle bonding
Adhesive n Cure with UV/Visible light
n Latex rubber tubing to PET – Household products
Good cosmetic appearance
& Loctite® 4310™ n Low viscosity n
BONDING SOLUTIONS
8
SUPERIOR SOLUTIONS
for demanding
applications
Loctite® 403 ™ n High viscosity n Reduced white residue “blooming” or “frosting” Wood to ABS – Fountain pens
n
Prism® Instant Adhesive n Color: Clear
n Surface insensitive Rubber to metal – Gasketing and sealing
n
7 www.instant.loctite.com
BONDING SOLUTIONS
10
Elastomers
Polyolefins
Container
Viscosity
Approval
Surfaces
Surfaces
Strength
(inches)
Plastics
Agency
Fixture
Porous
Metals
Range
Acidic
Speed
ITEM
Temp.
Shear
Color
(psi)
(cP)
Gap
Primary Feature Product NUMBER
Stronger Medium Viscosity Loctite® 480™ Prism®
G VG VG NR G4 GPR 48040 20 g bottle
Black 0.006 200 3,800 -65°F to 212°F 90 sec. NSF/ANSI 61
for Close Fitting Parts Instant Adhesive 48061 1 lb. bottle
Solutions
Toughened
Insensitive
Instant Adhesive VG G G NR VG GPR 40994 20 g bottle Clear 0.006 200 2,700 -65°F to 212°F 30 sec. ISO 10993
Surface
G G G NR G GPR
High Temperature
Instant Adhesive 28027 Clear 0.005 375 2,200 -65°F to 250°F 120 sec.
for Close Fitting Parts 1 lb. bottle
Toughened
G G G G G GPR 0.005 150 2,0003 -65°F to 180°F <5 sec. ISO 10993
NEW, HENED
Close Filling Light Cure Adhesive 1401790 1 lb. bottle Pale Green
TOUG High Viscosity for Loctite 4311 Flashcure 37441 1 oz. bottle Clear to
® ™ ®
Gap Filling Light Cure Adhesive G G G G G GPR 37443 1 lb. bottle Pale Green
0.008 900 2,0003 -65°F to 180°F <5 sec. ISO 10993
Porous Surfaces
for Demanding Medium Viscosity for Loctite® 460™ Prism®
46004 3 g tube
Applications Close Fitting Parts Instant Adhesive G VG G NR VG GPR 46040 20 g bottle Clear 0.004 45 2,600 -65°F to 160°F 50 sec.
46061 1 lb. bottle
High Viscosity for 40304 3 g tube
Loctite® 403™ Prism®
Gap Filling Instant Adhesive G VG G G VG GPR 40340 20 g bottle Clear 0.008 1,000 2,600 -65°F to 160°F 50 sec.
40361 1 lb. bottle
Low Viscosity, Loctite® 408™ Prism® 40840 20 g bottle
Wicking Grade Instant Adhesive G VG G NR VG GPR 40861 1 lb. bottle
Clear 0.002 5 2,600 -65°F to 160°F 50 sec.
9 The above information is presented as a guideline only. Henkel recommends evaluating the selected product in your application to determine suitability.
LEGEND
G = Good VG = Very Good GPR = Good in Combination with Loctite® 770™ Prism® Primer NR = Not Recommended
1
Data generated using grit blasted steel except where noted BONDING SOLUTIONS
2
Full Cure = 24 hours without UV/VIS exposure; with UV/VIS exposure, see technical data sheets
3
Data generated using polycarbonate
4
Accelerator required
12
PROCESS SOLUTIONS
representative. Cyanoacrylate
98013
High
Performance
Low to
Drop, Instant Adhesives,
Dot, Bead, Retaining Compounds, Yes No
are available. an d 30 g s yri n ges
Dispense Medium Loctite® 7700
Diaphragm Microdots Threadlockers 98413 400 watt
Valve 7411-S UV Flood
Metal Halide
11 www.instant.loctite.com
System www.equipment.loctite.com
PROCESS SOLUTIONS
14
Surface Primers
When your application Improve adhesion on difficult-to-bond substrates
Henkel is in the business of solving customers’ Process Consultations
E N G I N E E R I N G S E RV I C E S
involves difficult-
n
On-Part Item
Product Base Features Package Size
Life Number
to-bond substrates problems. When customers buy Loctite® n Customer Teardowns
• Adhesion promoter
Loctite® 770™ • Especially for polyolefins such as PE and PP
brand instant adhesives, they get more than n Custom Equipment
or requires increased Prism® Primer
n-heptane • Suitable for PTFE and thermoplastic elastomers
• Long on-part life
≤8 hrs.
18396
18397
1.75 fl. oz. bottle
16 oz. can
• Fluorescent under UV light / black light
a product – they get a partner who will work n Customer Line Surveys
cure speeds, Henkel
side by side with them to find innovative n Material Properties Testing
offers a full line of n-butoxy propanol
• Adhesion promoter
Loctite® 793™ propylene glycol ether, • Especially for polyolefins such as PE and PP
≤2 hrs.
18650 1.75 fl. oz. bottle
Prism® Primer and water
• Suitable for PTFE and thermoplastic elastomers 20246 16 oz. can
solutions to their manufacturing problems. n Adhesive Performance
primers and accelerators • Nonflammable
n Surface Analysis
to provide the solutions • Adhesion promoter
Loctite® 7951™ perfluorocarbon and • Especially for polyolefins such as PE and PP 27858 1.75 fl. oz. bottle
Prism® Primer chlorobenzotrifluoride • Suitable for PTFE and thermoplastic elastomers
≤8 hrs.
1354770 16 oz. can
Rapidly emerging, innovative processes and
n Process Optimization
you require. • Nonflammable and noncombustible
n Equipment Support
materials mandate an unprecedented breadth
Accelerators
Increase cure speed of Loctite® Instant Adhesives and depth of engineering savvy. Not every
To access these and other Henkel
Product Base Features
On-Part Item
Package Size
company can provide the equipment and Engineering Services, contact our
Life Number
Loctite® 7113™
• Excellent for cosmetic applications, for clear
and transparent adhesive beads or fillets 19605 1.75 fl. oz. bottle
From design and product development to
n-heptane ≤24 hrs.
Accelerator • Suitable for loudspeaker assembly bonding 19606 1 gallon can
and coil to ferrite magnet bonding simulated testing of the manufacturing process
• Long on-part life
and dispensing trials, Henkel brings a wealth
Clean-Up Solvent of expertise and experience to its customers.
Product Features
Item
Number
Package Size In a design-through-assembly partnership, no
Loctite® 768™ • Loctite® 768™ X-NMS™ quickly and safely dissolves cured 76820 1.75 fl. oz. bottle one adds value like Henkel.
X-NMS™ cyanoacrylate-based adhesives 76871 1 gallon can
13 www.instant.loctite.com
TECHNICAL SOLUTIONS