Professional Documents
Culture Documents
Parameter
Location: Indonesia, Situbondo (8° South; 114° Water temperature: 25 °C
East)
Required daily output: 35 m³; Sizing for average month Dirt loss: 4,0 % Motor cable: 50 m
Pipe type: plastic Static head: 60 m Pipe length: 60 m
Output [m³]
Energy [kWh] 11 11 13 14 15 14 15 16 17 15 13 11 14
Irradiation [kWh/m²] 4,5 4,7 5,5 5,8 6,2 6,1 6,4 6,9 7,1 6,5 5,4 4,7 5,8
Rainfall [mm] 9,6 8,9 7,9 4,1 3,2 1,8 1,7 0,87 0,60 1,4 3,5 7,8 4,3
Ambient temp. [°C] 26 26 26 27 27 26 26 26 26 26 26 26 26
Hourly values 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00
Output [m³/h]
Energy [kWh] 0,012 0,43 0,91 1,3 1,6 1,8 1,8 1,7 1,6 1,3 0,87 0,41 0,011
Irradiation [kWh/m²] 0,004 0,16 0,36 0,54 0,68 0,77 0,79 0,77 0,68 0,54 0,36 0,16 0,004
Ambient temp. [°C] 21 21 22 24 26 28 30 31 31 31 31 30 30
System characteristic
Wiring diagram
System Layout
Sizing Layout
H (Static head): Vertical height from the dynamic water level to the highest point of delivery.
B (Drawdown): Lowering of water level depending on flow rate and recovery rate of the well.
D (Pipeline inner diameter)
L (Pipe length): Entire pipeline from the pump outlet to the point of delivery. Ellbows and armatures must be added as an
equivalent length of pipeline.
M (Motor cable): The cable between controller and pump unit.
T (Tilt angle): Angle of the PV generator surface from the horizontal plane.