Professional Documents
Culture Documents
Parameter
Location: Indonesia, Banjarmasin (4° South; Water temperature: 25 °C
114° East)
Required daily output: 35 m³; Sizing for average month Dirt loss: 5,0 % Motor cable: 50 m
Pipe type: plastic Static head: 30 m Pipe length: 200 m
Output [m³]
Energy [kWh] 5,6 6,1 6,5 7,2 7,5 7,5 7,8 8,2 7,8 7,0 6,2 5,7 6,9
Irradiation [kWh/m²] 4,1 4,5 4,8 5,3 5,6 5,5 5,8 6,1 5,8 5,2 4,5 4,1 5,1
Rainfall [mm] 11 9,6 9,9 7,7 6,3 4,8 4,2 3,2 3,7 4,4 8,1 11 7,0
Ambient temp. [°C] 26 26 26 26 26 26 25 25 26 26 26 26 26
Hourly values 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00
Output [m³/h]
Energy [kWh] 0,003 0,21 0,46 0,66 0,82 0,90 0,92 0,89 0,80 0,64 0,44 0,20 0,003
Irradiation [kWh/m²] 0,002 0,14 0,32 0,47 0,60 0,68 0,70 0,68 0,60 0,47 0,32 0,14 0,002
Ambient temp. [°C] 21 21 22 24 26 28 30 31 31 31 31 30 30
System characteristic
Wiring diagram
System Layout
Sizing Layout
H (Static head): Vertical height from the dynamic water level to the highest point of delivery.
B (Drawdown): Lowering of water level depending on flow rate and recovery rate of the well.
D (Pipeline inner diameter)
L (Pipe length): Entire pipeline from the pump outlet to the point of delivery. Ellbows and armatures must be added as an
equivalent length of pipeline.
M (Motor cable): The cable between controller and pump unit.
T (Tilt angle): Angle of the PV generator surface from the horizontal plane.