You are on page 1of 7

Solar Electricity Company Yug Tamrakar

Tripureshwar Tel: +977-9851022649


Kathmandu Fax:
www.lorentz.de yug@secnepal.com

Wednesday, June 23, 2021


Bagmati Irrigation Project

Solar pumping project

Note: Lower Terraces

Four Parallel Lines

Parameter
Location: Nepal, Birgunj (27° North; 84° East) Water temperature: 25 °C
Required daily output: 325 m³; Sizing for average month Dirt loss: 5.0 % Motor cable: 100 m
Pipe type: steel Static head: 34 m Pipe length: 220 m

Products Quantity Details


PSk2-9 C-SJ30-7 1 pc. Submersible pump system including controller with DataModule, motor and pump end
Premier PSS24250 60 pc. 15,000 Wp; 20 x 3 modules; 27 ° tilted
Motor cable 100 m 4 mm² 3-phase cable for power and 1-phase cable for ground
Pipeline 220 m 130 mm (inner diameter) Pipeline
Accessories 1 set Well Probe V2, Float Switch, Pressure Switch, Liquid Level Sensor, Liquid Pressure Sensor,
Water Meter, PV Disconnect 1000-40-5, PV Protect 1000-125, SmartPSUk2, SmartStart, Surge
Protector2

SunSwitch setting in PumpScanner min. 100 W/m²


Daily output in average month 329 m³
Daily values Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Av.

Output [m³]

Energy [kWh] 79 88 93 88 80 67 54 57 61 81 87 81 76
Irradiation [kWh/m²] 5.7 6.5 7.2 6.9 6.2 5.1 4.0 4.3 4.6 6.1 6.4 5.9 5.8
Rainfall [mm] 0.60 0.57 0.73 1.7 4.4 10 17 14 10 2.5 0.27 0.47 5.3
Ambient temp. [°C] 10 13 18 21 22 22 22 22 21 18 14 11 18

Hourly values 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00

Output [m³/h]

Energy [kWh] 0.26 2.3 4.9 7.2 9.0 10.0 10 9.8 8.7 7.0 4.7 2.2 0.25
Irradiation [kWh/m²] 0.018 0.16 0.34 0.52 0.67 0.77 0.80 0.77 0.67 0.52 0.34 0.16 0.018
Ambient temp. [°C] 13 13 14 16 18 20 22 23 23 23 23 22 22

Created by LORENTZ COMPASS 3.1.0.169


1/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
Solar Electricity Company Yug Tamrakar
Tripureshwar Tel: +977-9851022649
Kathmandu Fax:
www.lorentz.de yug@secnepal.com

Wednesday, June 23, 2021


Bagmati Irrigation Project

Solar pumping project

System characteristic

Min. 800 W/m², 20 °C Max./STC*


PV generator Cell temperature [°C] 46 25
Temperature loss [%] 11 -
Dirt loss [%] 5.0 -
Pmax [Wp] 10,200 15,000
Vmp [V] 648 724
Imp [A] 16 21
Voc [V] 823 896
Isc [A] 18 23
Pout [W] 7,710 -
Vout [V] 759 -
Iout [A] 9.8 -
Motor cable Power loss [%] 1.3 2.9 2.9
Pump systems Motor power [W] 1,455 7,410 7,410
Motor voltage [V AC] 255 380 380
Motor current [A] 3.8 13 13
Motor speed [rpm] 0 2,840 2,840
Frequency [Hz] 1.0 50 50
Flow rate [m³/h] 0.081 38 38
Efficiency [%] 0.51 48 55
Pipeline Flow speed [m/s] 0.002 0.79 0.79
Friction loss [m] 0.000 1.2 1.2
*STC: Standard test conditions for photovoltaic modules, 1000 W/m² solar iradiance, 25 °C cell temperature

Created by LORENTZ COMPASS 3.1.0.169


2/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
Solar Electricity Company Yug Tamrakar
Tripureshwar Tel: +977-9851022649
Kathmandu Fax:
www.lorentz.de yug@secnepal.com

Wednesday, June 23, 2021


Bagmati Irrigation Project

Solar pumping project

Wiring diagram

Created by LORENTZ COMPASS 3.1.0.169


3/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
Solar Electricity Company Yug Tamrakar
Tripureshwar Tel: +977-9851022649
Kathmandu Fax:
www.lorentz.de yug@secnepal.com

Wednesday, June 23, 2021


Bagmati Irrigation Project

Solar pumping project

System Layout

1: PSk2 Controller 11: Float Switch


2: Submersible Pump 12: PV Protect
3: Stilling Tube 13: PV Combiner
4: Well Probe 14: PV Disconnect
5: Cable Splice Kit 15: PV Module for Sun Switch
6: Grounding Rod 16: PV Generator
7: Surge Protector* *It is recommended to install a Surge Protector at each
controller sensor input.
8: Safety Rope
9: Water Meter
10: Pressure Sensor

Created by LORENTZ COMPASS 3.1.0.169


4/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
Solar Electricity Company Yug Tamrakar
Tripureshwar Tel: +977-9851022649
Kathmandu Fax:
www.lorentz.de yug@secnepal.com

Wednesday, June 23, 2021


Bagmati Irrigation Project

Solar pumping project

Sizing Layout

H (Static head): Vertical height from the dynamic water level to the highest point of delivery.
B (Drawdown): Lowering of water level depending on flow rate and recovery rate of the well.
D (Pipeline inner diameter)
L (Pipe length): Entire pipeline from the pump outlet to the point of delivery. Ellbows and armatures must be added as an
equivalent length of pipeline.
M (Motor cable): The cable between controller and pump unit.
T (Tilt angle): Angle of the PV generator surface from the horizontal plane.

Created by LORENTZ COMPASS 3.1.0.169


5/5 All specifications and information are given with good intent, errors are possible and products may be subject to change
without notice.
PSk2-9 C-SJ30-7
Solar Submersible Pump System for 6" wells

System Overview
Head max. 50 m
Flow rate max. 39 m³/h

Technical Data
Controller PSk2-9
ƒHigh efficiency solar pump controller
ƒHybrid power (solar / grid / generator) support with LORENTZ
SmartSolution
ƒInputs for water meter, pressure sensors, digital switches
ƒSimple configuration with LORENTZ PumpScanner AndroidŒApp
ƒOnboard data logging and system monitoring
ƒInbuilt applications for constant pressure, constant flow and daily
amount
ƒIntegrated Sun Sensor
ƒActive temperature management
ƒIntegrated MPPT (Maximum Power Point Tracking)

Power max. 10 kW
Input voltage max. 850 V
Optimum Vmp** > 575 V
Motor current max. 17 A
Efficiency max. 98 %
Ambient temp. -30...50 °C
Enclosure class IP54

Motor AC DRIVE SUB 6" 7.5kW


ƒHighly efficient 3-phase AC motor
ƒFrequency: 25...50 Hz
ƒPremium materials, stainless steel: AISI 304
ƒNo electronics in the motor
Efficiency max. 80 %
Motor speed 1,400...2,850 rpm
Power factor 0.87
Insulation class F
Enclosure class IP68
Submersion max. 150 m
Pump End PE C-SJ30-7
ƒNon-return valve
ƒPremium materials, stainless steel: AISI 304
ƒCentrifugal pump
Efficiency max. 79 %
Pump Unit PUk2-9 C-SJ30-7 (Motor, Pump End)
Borehole diameter min. 6,0 in
Water temperature max. 30 °C****

Standards
2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995, IEC/EN 62253 Ed.1

The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market
requirements.
**Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature
****Special solutions available for >30 °C, please consult your distributor

BERNT LORENTZ GmbH


Siebenstuecken 24, 24558 Henstedt-Ulzburg,
Germany, Tel +49 (0)4193 8806-700, www.lorentz.de

Created by LORENTZ COMPASS 3.1.0.169


All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual
products depending on local market requirements and regulations.
PSk2-9 C-SJ30-7
Solar Submersible Pump System for 6" wells

Pump Chart Vmp* > 575 V

Dimensions and Weights


Controller Pump Unit

H= 500 mm A= 1,583 mm
H1 = 450 mm B= 645 mm
H2 = 421 mm C= 938 mm
W1 = 320 mm D= 144 mm
W2 = 290 mm E= 133 mm
D= 9.0 mm S= 3 in
D1 = 226 mm

Net weight
Controller 18 kg
Pump Unit 69 kg
Motor 51 kg
Pump End 18 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH


Siebenstuecken 24, 24558 Henstedt-Ulzburg,
Germany, Tel +49 (0)4193 8806-700, www.lorentz.de

Created by LORENTZ COMPASS 3.1.0.169


All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual
products depending on local market requirements and regulations.

You might also like