Professional Documents
Culture Documents
Timken Part Number LM11749 - LM11710, Tapered Roller Bearings - TS (Tapered Single)
Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series LM11700
0.10 Kg
Bearing Weight
0.2 lb
Dimensions
9/24/2019 | Page 2 of 4
17.463 mm
d - Bore
0.6875 in
39.878 mm
D - Cup Outer Diameter
1.5700 in
14.605 mm
B - Cone Width
0.5750 in
10.668 mm
C - Cup Width
0.4200 in
13.843 mm
T - Bearing Width
0.5450 in
Aa - Cage-Cone Backface 0 mm
Clearance 0 in
-5.1 mm
a - Effective Center Location3
-0.2 in
9/24/2019 | Page 3 of 4
5260 lbf
C0 - Static Radial Rating
23400 N
Factors
K - Factor7 2.04
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
0.4200
0.05
0.5750
1.5700
0.6875
1.34
0.87
0.94
1.48
-0.20
IMPERIAL UNITS
ISO Factor - e 0.29
ISO Factor - Y 2.1 LM11749 - LM11710
Bearing Weight 0.2 lb TS BEARING ASSEMBLY
Number of Rollers Per Row 14
Effective Center Location -0.2 inch
K Factor 2.04
Dynamic Radial Rating - C90 1710 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 838 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 5260 lbf
Dynamic Radial Rating - C1 6600 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY