Professional Documents
Culture Documents
Guidelines of Cad Command: Draw Tool Bar
Guidelines of Cad Command: Draw Tool Bar
1. LINE command
Type L - enter
Specify first point: (pick on the drawing area)
Specify next point: (pick on the drawing area) – ( Ex. 4) enter
2.RAY command
Type RAY - enter
Specify first point: (pick at the center of arc)
Specify through point: (pick on the edge of a circle) enter
4.MULTILINE command
Type ML - enter
Specify first point or (justification ,score ,style) sc - enter
Enter mline scale (0.00) type the value - enter
Specify first point or ( justification, scale, style ) j - enter
Enter justification type (top , zero , bottom ) z - enter
Pick first point or justification, scale, style )
Pick next point:
Pick next point:
Pick next point:
Pick next point: c - enter
5. POLYLINE command :
Type PL - enter
Specify first point: (pick on the drawing area)
Specify next point: (arc, half width, length ,undo, width ) 5
Specify next point: (arc, close, half width, length ,undo, width ) A –
enter
Specify end point of arc or (angle, close, line, radius, undo) 2 – enter
Specify end point of arc or (angle, close, line, radius, undo) L – enter
Specify next point: (arc, close, half width, length ,undo, width ) 5 – enter
Specify next point: (arc, close, half width, length ,undo, width ) A –
enter
Specify end point of arc or (angle, close, line, radius, undo) CL – enter
6.POLYGON command :
Type POL - enter
Enter number of sides (0.00) type the sides – enter
Pick center of polygon or (edge) – pick
Enter an option (inscribed in circle, circumscribed about circle) – enter
Specify radius of circle type the value- enter
7. RECTANGLE command
Type REC - enter
Pick first corner point of rectangle ( chamfer, elevation, fillet,
thickness,
width ) pickonthedrawingarea
Specify another corner point or (Dimension) D – enter
Specify length o f rectangles ( 0.000) type the length – enter
Specify width of rectangles ( 0.000) type the width – enter
Pick anywhere on the drawing area ( to fixed your drawing)
8.ARC command
Type A - enter
Pick first point of an arc
Pick second point of an arc
Pick end point of an arc
9.CIRCLE command
Type C - enter
Pick center point of circle
Specify radius of a circle (diameter) D or R - enter
type the value - enter
11.SPLINE command
Type SPL - enter
Specify first point : pick on the drawing area
Specify next point: pick on the drawing area
Specify next point: pick on the drawing area- 3 times enter
12.)ELLIPSE command
Type EL enter
Specify distance to other axis 1
Specify distance to other axis or (rotation) 2 enter
13.)HATCH command
Type H enter
Swatch : pick
Ansi, iso, predefined , custom ( pick the ansi)
Pick points ( pick internal points ) enter ok
15.)REGION command
Type REG enter
Select objects enter
16.)DIVIDE command
type DIV enter
Select objects to divide
Enter the no. of segments or ( block) 5- enter
17.)MEASURE command
Type ME enter
Select object to measure
Enter the length of segments or ( block ) 0.50- enter
MODIFY TOOL BAR
1.ERASE command
Type E enter
Select object: enter
2.COPY command
Type CO , CP enter
Select object: enter
3.MIRROR command
Type MI enter
Select object: enter
Specify first point of a mirror line
Specify second point of mirror line
Delete source object [yes. No ] < no > N enter
4.OFFSET command
Type O enter
Select object : enter
Specify offset distance ( through ) (0.000) 4 enter
Select object to offset (then,clickthedrawingarea
5.ARRAY command
Type AR enter
6. TRIM command
Type TR enter
Select object : ( pick ) enter
7.EXTEND command
Type EX enter
Select object : ( pick the boundaries first) enter
Select object to extend ( pick) enter
8. BREAK command
Type BR enter
Select object : ( pick – where the line start to break)
Specify second break point or ( pick- where the line end)
9. EXPLODE command
Type X enter
Select object: enter