Professional Documents
Culture Documents
C
20 mm f 20 mm f
110 mm c/c 110 mm c/c
20 mm f 220 mm c/c
20 mm f 20 mm f
A 20 mm f 110 mm c/c 220 mmc/c 10 mm f 220 mmc/c
20 mm f 220 mm c/c 230 mmc/c
20 mm f 220 mm c/ (d)
10 mm f 230 mm c/c both side 10 mm f 20 mm f 10 mm f
20 mm f 110 mm c/ (d+e) 110 mmc/c 220 mmc/c 110 mmc/c
B
Bars(c) 20 mm f 250 mmc/c
42467 x 1000
Required depth = = 179 mm
1.320 x 1000
Provide total depth T= 179 + 35 = 220 mm so that available d = 185 mm
4 Determination pull :-
Direct tension on Long wall = PL = P x B/2 = 19600 x 4.00 / 2 = 39200 N
Direct tension on short wall = PL = P x B/2 = 19600 x 6.00 / 2 = 58800 N
5 Cantilever Moment :- Cantilever moment atb the base, per unit length .
h2 9800 x 4.00 x 1.00 2
= wH x = 6533 N-m
6 6
This will cause tension at water face.
6 Reinforcement at corners of long walls.:- The upper portion of long walls is subjected to both bending in
horizontal direction as well as pull. The reinforcement for both will be in horizontal direction. Hence
reinforcement has to be provided forr a net moment (MF - Px ), where Mf is the moment at ends (causing
tension on water face). Similarly vertical section of unit height ( 1 m) of long wall, at its end, at the level of
1.00 m above the base , where reinforcement is provided at the water face.
T 220
x= d- = 179 - = 69 mm
2 2
Mf - Pl x 45733 x 1000 ) - ### x 69
Ast for B.M. = = = 2371 mm2
sst.j.d 115 x 0.853 x 185
PL 39200
Ast for pull = = = 341 mm2
ss 115
Total Ast = 2371 + 341 = 2712 mm2 per meter height.
3.14xdia2 3.14 x 20 x 20
using ### mm bars A = = = 314 mm2
4 x100 4 x 100
Spacing of Bars = 1000 x 314 / 2712 = 116 say = 110 mm
Hence Provided 20 mm F bar, @ 110 mm c/c. The above reinforcement is to be provided at
inner face, near the corners, and at a height 1.00 m above the base. For other height the above spacing
may be varied, since bending moment will reduce.
#REF!
Roof
#REF! mm f @ #REF! mm c/c #REF! mm f @ 0
#REF! mm c/c
0.00
#REF!
Grade of concrete M-15 M-20 M-25 M-30 M-35 M-40 Grade of concrete
tc.max 1.6 1.8 1.9 2.2 2.3 2.5 sct.max