Professional Documents
Culture Documents
Department of Education
Division Office of Taguig City and Pateros
PRESIDENT DIOSDADO MACAPAGAL HIGH SCHOOL
I. Directions: Read each item carefully and choose the letter of the best answer from the choices below. Write your answer on the
space provided.
_______1. This is used for griping, holding, cutting electrical wires and cables and even small nails.
a. Combination Pliers b. Hammer c. Electrician’s Knife d. Cutter pliers
_______2. This can reach tight space or small opening where other pliers cannot reach.
a. Long Nose Pliers b. Hammer c. Electrician’s Knife d. Cutter pliers
_______3. This has a cross tip resembling a positive (+) sign. It is used to drive screws with cross slot heads.
a. Long Nose Pliers b. Hammer c. Philip Screw Driver d. Cutter plier
_______4. This is tools used in driving or pounding and pulling out nails.
a. Long Nose Pliers b. Hammer c. Philip Screw Driver d. Cutter plier
_______5. A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16.
a. Junction Box b. Wire Stripper c. Conduit d. Male Plug
_______6. A small drilling machine with a chuck capacity of ¼‖ to 3/8‖.
a. Stubby Screw Driver b. Portable Electrical Drill c. Fuse d. Male Plug
_______7. Comes in either Standard or Philips screw driver with short shank or blade and shorted handle used to
turn screws in tight space where standard screw drive cannot be used.
a. Junction Box b. Portable Electrical Drill c. Fuse d. Male Plug
_______8. Used by linemen to remove insulation of wire and cables in low and high voltage transmission lines.
a. Long Nose Pliers b. Hammer c. Electrician’s Knife d. Cutter pliers
_______9. Is a device inserted to a convenience outlet to conduct electric current.
a. Clamp b. Switch c. Male Plug d. Connectors
_______10. This is a circuit protective device that automatically blows and cut the current when an over load or
short circuit happens.
a. Circuit Breaker b. Switch c. Buzzer d. Male Plug
_______11. This is a rectangular shaped metallic or plastic (PVC) material in which flush type
convenience outlet and switch are attached.
a. Conduits b. Utility Box c. Junction Box d. Connectors
_______12. Are electrical materials used as the passage of wires for protection and Insulation.
a. Conduits b. Utility Box c. Junction Box d. Connectors
_______13. Are used to attach metallic or non-metallic conduit to the junction or utility boxes.
a. Conduits b. Utility Box c. Junction Box d. Connectors
_______14. This is a protective device used to cut off the current when trouble in the circuit such as short circuit or
over load occurs.
a. Fuse b. Switch c. Buzzer d. Male Plug
_______15. Is an octagonal shaped electrical material where the connections or
joints of wires are being done. It is also where the flush type lamp holder is attached.
a. Conduits b. Utility Box c. Junction Box d. Connectors