Professional Documents
Culture Documents
Standard
Frame Rating Voltage Protection Advanced Features &
Family (Amperes) Poles Rating Functions Communications
S = Spectra™ G = 600 3 = 3 poles 6 = 600V L3 = LSI2 X = Metering (Basic)
L4 = LSIG 2 = Metering (Basic) +
L5 = LSIA Modbus
Continuous
L7 = LSI-CP3 6 = Metering (Adv) +
Load Rating
Modbus +
C = Standard Waveform Capture
H = 100% Max Amps 8 = Metering (Adv) +
L = 100% 01 = 150A Modbus +
P = 100% 04 = 400A Waveform Capture +
06 = 600A Protective Relays
Interruption Rating
(kA @ 480V)
H = 35 Advanced Protection Functions
L = 65 X = None
P = 100 K = Neutral Protection
Z = ZSI (ST/GF)
T = ZSI (ST/GF/INST)
R = RELT
L = ZSI (ST/GF) + RELT
M = ZSI (ST/GF) +
Note: This information is provided for interpreting product numbers (it should not be used to build product numbers).
L = Long Time, S = Short Time, I = Instantaneous, G = Ground Fault, A = Ground Fault Alarm
Neutral Protection
ZSI = Zone Selective Interlocking, RELT = Reduced Energy Let-Through N = ZSI (ST/GF) + RELT +
Neutral Protection
2Without a Control Power connection, unless required by Advanced Protection Functions or Advanced Features
V = RELT + Neutral Protection
& Communications. P = ZSI (ST/GF/INST) + RELT
3With a Control Power connection. The only valid trailing product digits for L7 are XX.
S = ZSI (ST/GF/INST) +
Note: All Spectra™ breakers are UL listed as HACR type. Neutral Protection
W = ZSI (ST/GF/INST) + RELT +
Neutral Protection