Gamewell-FCI by Honeywell is notifying our customers about changes to the E3 Series Intelligent Network Voice Gateway, the INI-VG. Due to chip obsolesce, we have updated our hardware on the audio codec. These changes are hardware only and do not impact compatibility with older Voice Gateway boards. Hardware Update The new boards can be identified by the updated audio codec and slider switches (see Figure 1 below).
INI-VG (Old) INI-VG (New)
Figure 1 The new audio codec consolidates the three codecs used in the older INI-VG boards Replacement of termination jumpers with sliding switches. Simplifying switch adjustments, less susceptible to bending pins and losing jumpers Software Update To support the new INI-VG hardware, Gamewell-FCI has also released an updated versions of the INI-VGC, INI-VGX, and INI-VGE firmware (version 3.00). Version 3.00 can be downloaded in the “downloads” section of our website, and is fully backwards compatible with the older version of the INI-VG board. Please note, all new boards must use version 3.00 or higher. Flashing version 2.3, or older, of the INI-VGC, INI-VGX, and INI-VGE to the new board is NOT compatible and will cause irreparable damage to the board. Support For any technical questions please contact Gamewell-FCI Technical Support at 1-800-274-4324. We at Honeywell Security and Fire appreciate your continued business and support of Gamewell-FCI products. Sincerely,
Chuck Han Product Marketing Honeywell | Security and Fire Gamewell-FCI by Honeywell