Professional Documents
Culture Documents
reviewer2@nptel.iitm.ac.in ▼
Unit 8 - WEEK 07
Course
outline
Assignment 07
The due date for submitting this assignment has passed. Due on 2018-03-14, 23:59 IST.
How to access
the portal Submitted assignment
WEEK 01 1) Estimate the transverse modulus (ET), of the glass-epoxy composite with a fiber volume fraction 1 point
of 25%. Modulus of elasticity of glass fiber and epoxy is 70 GPa, and 3.5 GPa, respectively. Assume that
WEEK 02 fibers have a circular cross-section.
9.25 GPa
WEEK 04
6.5 GPa
WEEK 05 10.5 GPa
Accepted Answers:
Powered by
Assignment 7
Transverse strength of the composite material is less than the transverse strength of matrix of the composite.
Solution
Week 7 4) Estimate the shear modulus (G LT ), of the graphite-epoxy composite with a fiber volume fraction 1 point
Feedback of 50%. The shear modulus of graphite fiber and epoxy is 10.4 GPa, and 1.5 GPa respectively. Assume that
fibers have a circular cross-section.
WEEK 08
3.3 GPa
WEEK-09
3.0 GPa
WEEK-10 2.7 GPa
5) Calculate the major Poisson’s ratio for Kevlar-epoxy composite with a fiber volume fraction of 1 point
30%. The Poisson’s ratios for Kevlar and epoxy are 0.20 and 0.35, respectively.
0.20
0.25
0.30
0.35
6) In general “fiber breakage” type of failure mode occurs in glass fiber composite, when: 1 point
Vf<40%
65%>Vf >40
Vf>65%
None of these
7) Which one of the following does not occur during a composite failure in longitudinal compression 1 point
mode?
Fiber breakage
Buckling of fibers
Shear failure
8) Which of the following is the most common type of failure when a unidirectional composite fails 1 point
due to transverse tensile load?
Matrix failure
Fiber debonding
Fiber splitting
None of these
9) For unidirectional composites, the moisture expansion coefficient is virtually negligible for which 1 point
direction?
Longitudinal direction
Transverse direction
None of these
10)Estimate the coefficient of thermal expansion for a unidirectional glass-polyester composite in 1 point
the longitudinal direction. The fiber volume fraction of the composite is 40%. Assume the following
constituent properties.
Coefficient of thermal expansion for fiber (αf) =0.5*10-5/ 0C
Coefficient of thermal expansion for matrix (αm) =9.0*10-5/0C
Young’s modulus of fiber (Ef ) =70GPa ; Young's modulus of matrix (Em)=3.5 GPa
Poisson’s ration of fiber(νf) = 0.2 ; Poisson’s ration of matrix (νm)=0.35
1.92*10-5
1.09*10-5
0.77*10-5
0.61*10-5