Professional Documents
Culture Documents
Figure 2: Hydraulic spindle (1) with wheel hub adapter (2), special pliers for clamps (3)
and clamping device for the drive shaft (4)
Figure 1: Tool Set 1002290 The spindle (1) and the wheel hub adapter (2) make it possible to
press the drive shaft out of the wheel hub with reduced force.
Clamps, which are usually used with axle boots, can be installed
quickly and easily with the special pliers (3).
Issued 07.2017 RUVILLE 1175 Technical content subject to change
Key to figure 2:
© 2017 Schaeffler Automotive Aftermarket GmbH & Co. KG