Professional Documents
Culture Documents
25.6 Ruled/ Flush pointing on White sand stone masonry surface with
lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2
marble dust}. (The rate is inclusive of all materials & labours involved
except scaffolding). sqm 104.30
25.7 Applying two or more coat of Ethyl Silicate chemical as approved
by Archaeological Survey of India/ Engineer-in-charge, of approved
brand and manufacturer, with brush or spray on the existing stone
masonry surface till there is no further absorption of chemical by
stone surface, including protecting the applied surface from direct
sunlight by suitable means during application, all complete as per
direction of the Engineer-in-Charge (The rate is inclusive of all
materials & labours involved except scaffolding). sqm 267.00
25.8 Applying breathable, non-reactive, antifungal, and water repellant
Silane/ Siloxane chemical as approved by Archaeological Survey of
India/ Engineer-in-charge, of approved brand and manufacture,
diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One
part of approved chemical :12 Part of Turpentine oil), on the existing
sand stone masonry surface with two or more coats to give uniform
application of chemical on the surface, all complete as per direction
of Engineer-In-charge (The rate is inclusive of all materials & labours
involved except scaffolding). sqm 69.70
389
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
3.0 MORTAR
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
391
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
4.0 CONCRETE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
392
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
394
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
5.0 REINFORCED CEMENT CONCRETE
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
CAST-IN-SITU
5.1 P/L R.C.C. upto plinth level :
5.1.1 1:1:2 (1 cement : 1 coarse sand : 2 graded stone
aggregate 20 mm nominal size) cum 6.10
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
5.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
5.2 R.C.C work in walls etc.:
5.2.1 1:1:2 (1 cement : 1 coarse sand : 2 graded stone
aggregate 20 mm nominal size) cum 6.10
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
5.2.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
5.3 R.C.C. (1:2:4) work in beams etc. cum 3.20
5.4 R.C.C. (1:2:4) work in kerbs, steps etc. cum 3.20
5.5 R.C.C. (1:2:4) work in arches,domes etc. cum 3.20
5.6 R.C.C. (1:2:4) work in chimneys & shafts. cum 3.20
5.7 R.C.C. (1:2:4) work in well-steining. cum 3.20
5.8 R.C.C. (1:1.5:3) work in vertical and horizontal fins individually
or forming box louvers, facias and eaves boards. cum 4.00
PRE - CAST R.C.C.
5.12 P/F precast R.C.C. (1:2:4) work in string courses, bands,
copings, bed plates, anchor blocks, plain window sills etc. cum 3.19
5.13 P/F precast R.C.C. (1:2:4) in small lintels not exceeding
1.5m clear span. cum 3.16
5.14 P/F precast R.C.C. (1:2:4) in mouldings as in cornices,
windows sills etc. cum 3.19
5.15 P/F precast R.C.C. (1:2:4) in lintels, beams and bressumers etc. cum 3.19
5.16 P/F precast R.C.C. (1:2:4) in shelves. cum 3.80
5.17 P/F precast R.C.C. (1:2:4) in vertical & horizontal fins individually
or forming box louvers. cum 4.36
395
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
396
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
6.0 BRICK WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
6.1 Brick work in foundation & plinth with non modular bricks.
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.2 Brick work in foundation & plinth with modular bricks.
6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.836
6.2.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.55
6.3 Brick work with machine moulded perforated bricks.
6.3.1 With non modular bricks. cum 0.625
6.3.2 With modular bricks. cum 0.55
6.4 Brick work in superstructure.
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.7 Half brick masonry in cement mortar (1:3) for closing cavity
5 to 7.5 cm wide in cavity wall. 100 metre 3.86
6.8 Brick work 7 cm in cement mortar (1:3). 100 sqm 9.23
6.9& Brick work in plain & gauged arches in cement mortar (1:3). cum 1.28
6.10
HALF BRICK MASONRY
6.12& Half brick masonry in foundations & plinth and superstructure.
6.13
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand) 100 sqm 14.28
&
6.13.1
6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 100 sqm 10.64
&
6.13.2
BRICK TILE WORK
6.16 Tile brick masonry in foundation and plinth. :
6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 1.52
6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1.00
6.17& Tile brick masonry with m/c moulded tiles in cement mortar
6.18 1:6 (1 cement : 6 coarse sand). cum 1.00
6.20 & Tile brick masonry with tile bricks in plain/gauged arches
6.21 work in in cement mortar (1:4). cum 1.33
6.22 Tile brick masonry work 5 cm thick in cement mortar (1:3). 100 sqm 7.65
397
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
398
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
7.0 STONE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
399
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
* White cement
400
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
8.0 MARBLE & GRANITE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
8.1 Marble work 18 mm thick for wall lining in cement mortar 1:3 100
including pointing with white cement mortar 1:2. sqm 8.67 + 1.70*
8.2 P/F 18mm thick gang saw cut mirror polished premoulded and
prepolished) machine cut for kitchen platforms, vanity counters 100
etc. laid over 20mm thick base cement mortar 1:4. sqm 9.12
8.4 Extra for fixing marble /granite stone over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy 100
resin based adhesive including cleaning etc. complete. metre 1.27
8.7 P/F cramps in RCC/ CC backing with cement mortar 1:2 .
8.7.1 Gunmetal cramps kg 0.0635
8.7.2 Stainless steel cramps kg 0.0701
8.9 Stone tile work for wall lining over 12mm thick bed of cement
mortar (1:3) and cement slurry @ 3.3 kg/sqm including pointing 100
in white cement complete. sqm 10.44 + 1.90*
* White cement
401
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
9.0 WOOD AND P.V.C. WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -9.0 WOOD AND PVC WORK
402
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
10.0 STEEL WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
10.4 P/F 1 mm thick M.S. sheet sliding-shutters with frame. 100 sqm 0.35
10.5 P/F 1 mm thick M.S. sheet door with frame. 100 sqm 0.35
10.6 Supplying and fixing rolling shutters. 100 sqm 0.35
10.10.1 & Fixing standard steel glaze door windows etc. 100 kg 0.13
10.11.1
10.13.1 P/F ‘T’ iron froms for doors windows & ventilators 100 kg 0.11
10.15 Providing and fixing M.S. Tubular frames for doors,
windows, ventilators and cupboard with 15x3 mm lugs
10 cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6 mix. 100 kg 0.28
403
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
11.0 FLOORING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
404
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
406
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
12.16 10 cm thick mud phaska with flat tile bricks grouted with
cement mortar (1:3). 100 sqm 3.11
12.17 10cm thick mud phaska with machine moulded tile bricks
grouted with cement mortar (1:3). 100 sqm 3.11
12.19 Providing and laying brick tiles over mumty roofs grouted with
cement mortar (1:3). 100 sqm 9.13
12.20 Providing and laying pressed clay tiles on roofs jointed with
cement mortar (1:4). 100 sqm 9.92
12.21 Providing gola 75x75 mm in cement concrete (1:2:4). metre 0.031
12.22 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete (1:2:4). each 0.06
12.23 Providing sand stone slab for roofing and laying cement
mortar (1 : 4). 100 sqm 0.74
12.38 Providing and fixing M.S. holder bat clamps in cement concrete
blocks 10x10x10cm of 1:2:4 mix. each 0.005
12.55 P/F heat resistant tile on roof with cement mortar (1:4) and
filling joints with white cement marble mix. sqm 0.1367
* White cement
408
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
13.0 FINISHING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
409
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
410
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
412
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
16.0 ROAD WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
FENCING
16.23 P/F boundary stone including finishing smooth with cement
mortar (1:3). each 0.082
16.24 P/F precast R.C.C. kilometre stone including finishing smooth
in cement mortar (1:3).
16.24.1 35x111x25 cm size each 0.37
16.24.2 50x152.5x25 cm size each 0.698
16.24.3 35x93.5x18 cm size each 0.23
CONCRETE PAVEMENT
16.42 Cement concrete (1:2:4) in pavements. cum 3.20
16.43 Providing and laying design mix cement concrete of M-30
grade, in roads/ taxi tracks/ runways, using cement content
as per design mix. cum 3.40
MISCELLANEOUS
16.49 Making bell mouth opening including providing cement
concrete (1:3:6) & plastering with cement mortar (1:3). 10 nos 6.60
16.52 Providing and fixing precast lime fly ash concrete blocks
including finishing with 10mm thick cement mortar (1:3), in
foot paths. sqm 0.05
16.63 P/L kerb channel 30cm wide and 50mm thick of cement
concrete (1:3:6). metre 0.11
16.67 Providing and fixing factory made RCC pavement slab of M-30
grade in footpath over a bed of 20mm average thick cement
mortar (1:5). 100 sqm 7.75
16.69 Providing and laying factory made kerb stone of M-25 grade
jointed with cement mortar (1:3). cum 0.05
16.75 Providing and laying C.C. pavement of mix M-25 with ready
mixed concrete. cum 3.30
16.80 Dry lean cement concrete sub base. cum 1.50
16.85 Laying old kerb stones, jointed with cement mortar (1:3). 100 metre 0.3723
413
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
17.0 SANITARY INSTALLATIONS
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
414
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
17.24 Fixing white vitreous china squatting plate urinal. each 0.02
17.25 Fixing white vitreous china wash basin. each 0.015
17.26/ Fixing kitchen sink. each 0.015
17.27
17.37 Providing and fixing M.S. holder-bat clamps. each 0.005
17.59 Providing and fixing M.S. stays and clamps. each 0.005
17.60 Providing and fixing trap of self-cleansing design. each 0.025
17.61 Cutting chases in brick masonry walls for sand cast iron/
centrifugally cast (spun) iron pipes and making good the
same with C.C.(1:3:6).
17.61.1 100 mm dia 100 metre 5.40
17.61.2 75 mm dia 100 metre 3.70
17.61.3 50 mm dia 100 metre 1.87
* White Cement.
416
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
19.0 DRAINAGE
417
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
19.6.12 1100 mm dia. R.C.C. pipe 100 metre 6.10
19.6.13 1200 mm dia. R.C.C. pipe 100 metre 6.80
19.7 Constructing brick masonry manhole in cement mortar (1:4).
19.7.1 Inside size 90x80 cm and 45 cm deep each 2.92
19.7.2& Inside size 120x90 cm and 90 cm.deep
19.7.3 each 4.73
19.8 Extra for depth for manholes
19.8.1 Size 90x80 cm metre 1.26
19.8.2 Size 120x90 cm metre 1.52
19.9 Constructing brick masonry circular type manhole 0.91 m
internal dia at bottom and 0.56m dia at top in cement
mortar (1:4).
19.9.1 0.91 m deep each 2.75
19.10 Extra depth for circular type manhole 0.91m internal dia
(at bottom) with beyond 0.91m to 1.67m metre 1.40
19.11 Constructing brick masonry circular manhole 1.22m
internal dia at bottom and 0.56m dia at top in cement
mortar (1:4).
19.11.1 1.68 m deep each 5.39
19.12 Extra depth for circular type manhole 1.22m internal dia
(at bottom) beyond 1.68 m to 2.29 m. metre 1.43
19.13 Constructing brick masonry circular manhole 1.52 m internal
dia at bottom and 0.56 m dia at top in cement mortar (1:4).
19.13.1 2.30 m deep each 10.86
19.14 Extra depth for circular type manhole 1.52 m internal dia
(at bottom) beyond 2.30 m. metre 3.11
19.15 Providing M.S. foot rests including fixing in manholes with
20x20x10 cm cement concrete blocks (1:3:6). 100 nos. 0.88
19.16 Providing orange colour safety foot rest. 100 nos 1.98
19.17 Replacement of M.S. foot rests in manholes with
20x10x10 cm C.C. blocks (1:3:6) mix. 100 nos 0.88
19.19 Providing and fixing in position precast R.C.C. manhole
cover and frame.
19.19.1 L D- 2.5
19.19.1.1 Rectangular shape 600x450mm internal dimensions each 0.128
19.19.1.2 Square shape 450mm internal dimensions each 0.096
19.19.1.3 Circular shape 450mm internal diameter each 0.096
19.19.2 M D - 10
19.19.2.1 Square shape 450mm internal dimension each 0.128
19.19.2.2 Circular shape 500mm internal diameter each 0.096
19.19.3 H D - 20
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.:. -19.0 DRAINAGE
418
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
420
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
20.5.1 400 mm dia piles metre 0.414
20.5.2 450 mm dia piles metre 0.525
20.5.3 500 mm dia piles metre 0.648
20.5.4 550 mm dia piles metre 0.784
20.5.5 750 mm dia piles metre 1.795
20.5.6 1000 mm dia piles metre 2.590
422
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
23.0 HORTICULTURE & LANDSCAPING
423
COEFFICIENTS
FOR BITUMEN
CONSUMPTION
425
2.0 COEFFICIENT FOR BITUMEN CONSUMPTION
16.0 ROAD WORK
427
Code Description Unit Quantity of bitumen
No. per unit quantity of
work (Quintals)
428
Code Description Unit Quantity of bitumen
No. per unit quantity of
work (Quintals)
430
S.No. Correction Slip No. Reference No. Contents in Brief
431
S.No. Correction Slip No. Reference No. Contents in Brief
432