Professional Documents
Culture Documents
WWW - Substech.com Dokuwiki Doku - PHP Id Drawing PDF
WWW - Substech.com Dokuwiki Doku - PHP Id Drawing PDF
Ads by Google Metal Stamping Dies Steel Stamping Hot Forming CNC Wire Forming
to Metals
to Metal forming technologies
Drawing
Dr. Dmitri Kopeliovich
Drawing is a metal forming process involving pulling a workpiece (cold or hot) through a die providing
reduction of the cross section of the workpiece.
Friction and deformation in the die cause heating the workpiece (wire, tube, rod) surface and may result in
sticking and breaking.
Contact friction, which is about a half of the total draw force, is controlled by lubricating the bar before it
enters the die.
When the total amount of deformation is too large and the wire undergoes hardening as a result of the
previous cold work operations, drawing is carried out in steps with annealing after each step.
Dies are made of alloy steel (die steel) hard alloys and diamond (drawing steel wires).
Drawing provides good surface quality and very low dimensions tolerances.
http://www.substech.com/dokuwiki/doku.php?id=drawing 10/11/2012
Drawing [SubsTech] Page 2 of 2
Drawing is used for production of wires (diameter down to 2µm) , seamless tubing, rods and other products
from brass and steel.
to top
■ Rolling
■ Forging
■ Extrusion
■ Deep drawing
■ Steel strip processing
■ Shot peening
■ Laser peening
■ Plastic deformation
■ Imperfections of crystal structure
https://www.tntech.edu/me/courses/Zhang/ME30103110/Chap11pt5.ppt
[https://www.tntech.edu/me/courses/Zhang/ME30103110/Chap11pt5.ppt]
http://mechatronic.me.hfu.edu.tw/Luo2/2Forming.pdf [http://mechatronic.me.hfu.edu.tw/Luo2/2Forming.pdf]
http://courses.washington.edu/courseli/me355/Lectures/Sp2006/lecture10-11-Bulk%20Deformation%
20Processes.ppt [http://courses.washington.edu/courseli/me355/Lectures/Sp2006/lecture10-11-Bulk%
20Deformation%20Processes.ppt]
http://iesu5.ust.hk/dfaculty/ajay/courses/ieem215/lecs/3_forming.pdf
[http://iesu5.ust.hk/dfaculty/ajay/courses/ieem215/lecs/3_forming.pdf]
to Metals
to Metal forming technologies
drawing.txt · Last modified: 2012/05/31 by dmitri_kopeliovich
Ads by Google Steel Rolling Mill Steel Bar Stainless Steel Mechanical Drawing
Except where otherwise noted, this work is licensed under a Creative Commons Attribution-
Noncommercial-Share Alike 3.0 License
http://www.substech.com/dokuwiki/doku.php?id=drawing 10/11/2012