Professional Documents
Culture Documents
Title page
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Use pursuant to applicable agreements
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2013 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2013 Alcatel-Lucent. All Rights Reserved.
Notice
Every effort was made to ensure that this information product was complete and accurate at the time of printing. However, information is subject to change.
Trademarks
All trademarks and service marks specified herein are owned by their respective companies.
Conformance statement
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the guidelines in this document, the
equipment may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at the expense of the user.
Security Statement
In rare instances, unauthorized individuals make connections to the telecommunications network through the use of remote access features. In such an event,
applicable tariffs require that the customer pay all network charges for traffic. Alcatel-Lucent cannot be responsible for such charges and will not make any
allowance or give any credit for charges that result from unauthorized access.
Limited Warranty
For terms and conditions of sale, contact your Alcatel-Lucent Account Team.
Ordering Information
For more ordering information, refer to “How to order” (p. xvii) in the section titled “About this document”
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Contents
1 Safety
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary iii
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Contents
....................................................................................................................................................................................................................................
Features ......................................................................................................................................................................................... 2-2
2-2
4 Commissioning
Index
....................................................................................................................................................................................................................................
iv Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
List of tables
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary v
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
vi Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
List of figures
3-1 CPB Server and Web Client Installer wizard welcome screen ................................................................. 3-3
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary vii
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
List of figures
....................................................................................................................................................................................................................................
3-24 New NE window ..................................................................................................................................................... 3-23
3-23
3-39 CPB Tool window with Optical Nodes tab open ......................................................................................... 3-36
3-41 CPB tool window without optical nodes tab open ...................................................................................... 3-37
....................................................................................................................................................................................................................................
3-51 Password Management window ........................................................................................................................ 3-45
3-53 Confirm Changes for ASON File Transfer window ................................................................................... 3-47
3-57 Confirm Changes for System User Authentication window ................................................................... 3-52
4-7 Completed Select Planning Tool Output File window .............................................................................. 4-11
4-18 Completed Select Planning Tool Output File window .............................................................................. 4-22
....................................................................................................................................................................................................................................
4-21 System Power Balancing Wizard: Overview ................................................................................................ 4-27
4-23 System Power Balancing Wizard: Overview using PT file ..................................................................... 4-29
4-27 Completed Select Planning Tool Output File window .............................................................................. 4-32
4-31 System Loss Report Wizard: Overview using plan .................................................................................... 4-46
4-33 Select Planning Tool Output File selection window .................................................................................. 4-47
4-34 Completed Select Planning Tool Output File window .............................................................................. 4-48
....................................................................................................................................................................................................................................
x Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
About this document
About this document
Purpose
This document provides instructions for use and descriptions of the features of the
Commissioning and Power Balancing (CPB) Tool. This manual is not a trouble clearing
manual. Refer to the Alcatel-Lucent 1830 PSS Product Information and Planning Guide,
for trouble analysis, or to the Alcatel-Lucent 1830 PSS Installation and System Turn-Up
Guide (Alcatel-Lucent 1830 PSS-16 and PSS-32) for additional system turn-up
instructions.
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
For additional safety precautions, please see the Alcatel-Lucent 1830 PSS User
Provisioning Guide.
...................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary xi
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
Optical safety
System design
The Alcatel-Lucent 1830 PSS system complies with the Food and Drug Administration’s
Center for Devices and Radiological Health (FDA/CDRH) regulations FDA/CDRH 21
CFR 1040.10 and 1040.11 as a Class I and with IEC Standard 60825-1 as a Class 1
Optical Fiber Telecommunication laser product.
The system has been designed to ensure that the operating personnel are not endangered
by laser radiation during normal system operation. The safety measures specified in the
FDA/CDRH regulations and the international standards IEC Standard 60825 and DIN/EN
60825, respectively, are met.
Potential sources of danger
Beware of the following potential sources of danger which will remain despite all safety
measures taken:
• Laser radiation can cause damage to the skin and eyes.
• Laser radiation from optical transmission systems is in a wavelength range that is
invisible to the human eye.
Laser classes
The maximum output power of laser radiation depends on the type of laser diode used.
The international standards IEC Standard 60825 and DIN/EN 60825, respectively, as well
as the FDA/CDRH regulations define the maximum output power of laser radiation for
each laser class in accordance with the wavelength.
The classification scheme is based on the ability of the laser emission or the reflected
laser emission to cause injury to the eye or skin during normal operating conditions.
Laser safety instructions
During service, maintenance, or restoration, an optical fiber telecommunication system is
considered unenclosed.
Observe the following instructions to avoid exposing yourself and others to risk:
• Only authorized, trained personnel is permitted to do service, maintenance, and
restoration. All unauthorized personnel is excluded from the immediate area of the
optical fiber telecommunication systems during installation and service.
• Read the relevant descriptions in the manuals before taking equipment into operation
or conducting any installation and maintenance work on the optical port units, and
follow the instructions. Ignoring the instructions may result in hazardous laser
radiation exposure.
• Do not view directly into the laser beam with optical instruments such as a fiber
microscope, because viewing of laser emission in excess of Class 1 limits
significantly increases the risk of eye damage.
....................................................................................................................................................................................................................................
xii Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
• Never look into the end of an exposed fiber or an open connector as long as the
optical source is still switched on.
• Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
• In the event of doubt, check that the optical source is switched off by measuring with
an optical power meter.
Laser radiation
CAUTION
Laser hazard
Use of controls, adjustments, and procedures other than those specified herein may result
in hazardous laser radiation exposure.
Intended audience
This document is for personnel who will utilize the CPB Tool, whether during
installation/integration of, or after turn-up of the Photonic Service Switch (PSS)
equipment.
Supported systems
The Alcatel-Lucent 1830 PSS supports WDM functionality and OCS functionality within
one node. The node consists of one WDM main shelf with optional extension shelves
and/or one OCS main shelf with optional extension shelves. The WDM functionality is
supported by Alcatel-Lucent 1830 PSS-16 and Alcatel-Lucent 1830 PSS-32 shelves, the
OCS functionality is supported by Alcatel-Lucent 1830 PSS-36 and Alcatel-Lucent
1830 PSS-64 shelves.
Conventions used
These conventions are used in this document:
Numbering
The chapters of this document are numbered consecutively. The page numbering restarts
at “1” in each chapter. To facilitate identifying pages in different chapters, the page
numbers are prefixed with the chapter number. For example, page 2-3 is the third page in
chapter 2.
Cross-references
Cross-reference conventions are identical with the conventions used for page numbering
The first number in a reference to a particular page refers to the corresponding chapter.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary xiii
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
Keyword blocks
This document contains so-called keyword blocks to facilitate the location of specific text
passages. The keyword blocks are placed to the left of the main text and indicate the
contents of a paragraph or group of paragraphs.
Typographical conventions
The typographical conventions used in this document are described in Table 1,
“Conventions used” (p. xiv).
Table 1 Conventions used
Appearance Description
emphasis Text that is emphasized
document titles Titles of books or other documents
file or directory names The names of files or directories
graphical user interface text Text that is displayed in a graphical user interface
keyboard keys The name of a key on the keyboard
system input Text that the user types as input to a system
system output Text that a system displays or prints
variables A value or command-line parameter that the user
provides
[] Text or a value that is optional
{value1 | value2} A choice of values or variables from which one value
{variable1 | variable2} or variable is used
Abbreviations
Abbreviations used in this document can be found in the “Glossary” unless it can be
assumed that the reader is familiar with the abbreviation.
Related information
....................................................................................................................................................................................................................................
xiv Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
Table 2 Information products related to Alcatel-Lucent 1830 PSS (continued)
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary xv
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
Table 2 Information products related to Alcatel-Lucent 1830 PSS (continued)
Alcatel-Lucent 1830 PSS Software Release Description This document is delivered with the NE software.
These documents can be downloaded from the Alcatel-Lucent Online Customer Support
Site (OLCS) (https://support.alcatel-lucent.com) or through your Local Customer
Support.
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
....................................................................................................................................................................................................................................
xvi Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
How to order
To order Alcatel-Lucent documents contact your local sales representative or use Online
Customer Support (OLCS) (https://support.ucent.com) (https://support.alcatel-lucent.com
(https://support.ucent.com)).
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary xvii
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xviii Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
1 Safety
1
Overview
Purpose
This chapter provides some important safety instructions for the Alcatel-Lucent 1830
Photonic Service Switch 32/16 (1830 PSS-32/PSS-16) system. Complete safety
instructions can be found in Alcatel-Lucent 1830 Photonic Service Switch 32/16 (1830
PSS-32/PSS-16) Safety Guide, Release 6.0.
Contents
General structure
Safety statements include the following structural elements:
...................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 1-1
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Safety Structure of safety statements
....................................................................................................................................................................................................................................
B C D
CAUTION
MP L E
Lifting hazard E F
SA
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
G
Always use three people or a lifting device to transport
and position this equipment. [ABC123]
H
Signal words
The signal words identify the hazard severity levels as follows:
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Safety Structure of hazard statements
....................................................................................................................................................................................................................................
General structure
Hazard statements include the following structural elements:
1 2 3
CAUTION
4
Lifting hazard 5
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
Always use three people or a lifting device to transport
and position this equipment. [ABC123]
6 7
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 1-3
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Safety Structure of hazard statements
....................................................................................................................................................................................................................................
Signal words
The signal words identify the hazard severity levels as follows:
CAUTION
Laser hazard
Unterminated optical connectors may emit invisible laser radiation. Do not view beam
with optical instruments. Avoid direct exposure to the beam.
Never look into the end of an exposed fiber or plug-in optical connectors as long as the
optical source is switched on. Always observe the laser warning instructions.
....................................................................................................................................................................................................................................
1-4 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Safety Important safety instructions
....................................................................................................................................................................................................................................
Power cable plug
DANGER
Arc-flash hazard
Arcing on removing or inserting a live power supply plug.
Arcing can cause serious burns to the hands and damage to the eyes.
Ensure that the line circuit-breaker on the power distribution panel (or Battery
Distribution Fuse Board - BDFB) is in the "OFF" position before removing or inserting
the power cable plug.
DANGER
Electric-shock hazard
There is a risk of electrical shock and/or serious injury if shielded 10BaseT LAN cables
are used, and the applicable national safety requirement have not been met.
The usage of shielded 10BaseT LAN cables is only allowed if the applicable national
safety requirements have been met by the user. Otherwise, there is a risk of electrical
shock and/or serious injury.
NOTICE
ESD hazard
Electronic components can be destroyed by electrostatic discharge.
Plug-in units must therefore always be kept in antistatic covers. Use the original
packaging if possible. Always observe the ESD instructions.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 1-5
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Safety General notes on safety
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-6 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Safety General notes on safety
....................................................................................................................................................................................................................................
4. This equipment is intended to be provided with appropriate 80 A (Max) branch circuit
protection on both the A and B -48/-60 V dc input feeds.
5. Opening or removing covers or sheet metal parts may present exposure to high
current or electrical energy levels or to other risks.
6. Use only Alcatel-Lucent manufactured circuit packs designed for use with this
equipment.
7. For information on proper mounting instructions, consult the Alcatel-Lucent 1830
Photonic Service Switch 32/16 (1830 PSS-32/PSS-16) Installation Instructions.
8. This equipment must be provided with a readily accessible disconnect device as part
of the building installation. (Such as a main power disconnect switch or external
circuit breaker).
9. Use only Alcatel-Lucent Power Cable Assembly provided with this equipment when
connecting to -48/-60 A/B V dc power sources.
10. Connect this product only to the type of power source indicated on the marking label.
11. This equipment is to be powered only by Safety Extra Low Voltage (SELV) or
Telecommunication Network Voltage 2 (TNV2) type sources.
12. Installation must include an independent frame ground drop to the building ground.
Refer to the Installation Instructions.
13. Use caution when installing or modifying telecommunication lines.
14. Never install telecommunication wiring during a lightning storm.
15. Never install telecommunication connections in wet locations.
16. Never touch uninsulated telecommunication wires or terminals unless the
telecommunication line has been disconnected at the interface.
17. Slots and openings in this product are provided for ventilation. To protect it from
overheating, these openings must not be blocked or covered. This product should not
be placed in a built-in installation unless proper ventilation is provided.
18. Never push objects of any kind into slots or openings in this product as they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electrical shock. Never spill liquid of any kind on the product.
DANGER
Laser hazard
Invisible laser radiation when open and fiber optic cable disconnected. Avoid Direct
Exposure to Beam.
Note: This unit has up to two (2) -48/-60 V input power feeders. Disconnecting less
than the maximum will not de-energize the system.
To reduce the risk of injury, disconnect two (2) power feeders when removing power
to the system.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 1-7
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Safety General notes on safety
....................................................................................................................................................................................................................................
CAUTION
Laser hazard
Un-terminated optical connections may emit laser radiation. Do Not View With Optical
Instruments.
....................................................................................................................................................................................................................................
1-8 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
2 CPB Tool Introduction
2
Overview
Purpose
This chapter provides information about the CPB Tool features.
Contents
Functionality 2-1
Features 2-2
Prior Release Features 2-3
Functionality
Overview
The Alcatel-Lucent 1830 PSS Commissioning and Power Balancing Tool (CPB) is a
software tool for automated provisioning, commissioning and power balancing functions
of photonic networks based on the Alcatel-Lucent 1830 PSS portfolio of WDM products.
The CPB Tool is one key component of Alcatel-Lucent’s Zero Touch Photonics
networking innovation, which enables easier operations, accelerated time-to-market and
optimized total cost of ownership (TCO) of wavelength services.
The CPB Tool can be used in conjunction with 1354 RM-PhM or can also be installed
and used as a stand-alone tool. The Provisioning, Commissioning and Power Balancing
menus and respective functionality of the CPB Tool integrated in 1354 RM-PhM and the
stand-alone CPB are the same. However, the stand-alone CPB Tool requires the user to
have access to another Network Management System (e.g. OMS, INC, etc.) or utilize the
NE built in user interfaces (CLI or WebUI) in order to make the relevant adjustments
required in support of Provisioning, Commissioning, and Power Balancing the Network
Element that would have otherwise been performed by utilizing the 1354 RM-PhM. For
...................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 2-1
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool Introduction Functionality
....................................................................................................................................................................................................................................
more details on utilizing the 1354 RM-PhM, refer to the Alcatel-Lucent 1830 PSS
Installation and System Turn-Up Guide and the Alcatel-Lucent 1354 RM-PhM Photonic
Manager EMS Reference Guide
Network commissioning
The network planning and design phase is performed using the 1830 PSS Engineering
Planning Tool (EPT). During this phase, the EPT segments networks into systems. The
EPT then produces commissioning files in .xml format (one file for each system) that are
used by the CPB Tool to commission the systems. For more details on the commissioning
file format and contents, as well as procedures used to plan the network refer to the
Alcatel-Lucent 1830 PSS Engineering and Planning Tool User Guide.
Features
Features introduced in Release 6.0
The Alcatel-Lucent 1830 PSS Commissioning and Power Balancing Tool (CPB) Release
6.0 supports Alcatel-Lucent 1830 PSS Release 6.0 and includes the following new
features:
• Client/Line Shelf – PSS-32S shelf
• 112PDM11 – 16G Fibre Channel multiplexer (low latency)
• 130SCUP – 100 G Coherent Switchponder/Uplink Card
• 24ANM - 24 x Multirate ANY Card
• 24ET1G – 24X1GE /SFP (hard copy FPGA)
• PSS-32S 5.5kW power filter
• 1588 Controller
• 11QCUPC 11G 4 Port Tunable Uplink
• 10AN10G 10X10G UNIVERSAL card
• 4QPA8 – 8xANY OTU1 card – PSS-4
• GMRE features:
– New transmission model for GMPLS
– GMPLS support channel banding
....................................................................................................................................................................................................................................
2-2 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool Introduction Prior Release Features
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 2-3
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool Introduction Prior Release Features
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-4 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
3 CPB Tool administration
3
Overview
Purpose
This chapter provides information for installing and administering the CPB Tool.
The web interface CPB Tool is intended to be the sole user interface for commissioning
and power balancing operations. It can be used as a stand-alone user interface and
installed from a CPB-only installation disk.
Contents
Installation 3-2
Launch the CPB Tool 3-14
Network administration 3-18
RADIUS server and user authentication 3-49
...................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-1
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
Installation
Overview
This section guides the user through installation of the CPB Tool.
The CPB Tool consists of a server and one or more clients. The server and clients both
support Solaris x86, Windows, HP-UX Itanium, and Red Hat Enterprise Linux. It is
recommended to update the server with the operating system vendor's most recent patches
before installing the CPB Tool.
It is recommended to configure the server with an Uninterruptible Power Supply (UPS).
If a power failure occurs without a UPS, corruption of the database is possible.
Alcatel-Lucent also recommends using a RAID 10 disk configuration for robustness.
The CPB Tool server sizing guidelines, outlined in the release notes, are based on the
number of NEs being managed by the server, and the number of simultaneously active
client users. These guidelines assume a NE has an average of 3 shelves (or approximately
60 cards). If the average is higher or lower, the configuration should be adjusted
accordingly.
System requirements
The CPB distribution media is a DVD-ROM, so the PC/server to which the server and
client software will be loaded must be DVD-compatible.
The recommended server or client system requirements are listed in the release notes
which can be obtained from your representative.
....................................................................................................................................................................................................................................
3-2 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 Insert the CPB disk into the DVD drive to which it will be loaded. If the setup.exe
application does not run automatically, manually run the program (in Windows, go to the
Start menu and select Run, then Browse to the setup.exe file). The introductory
installation window opens as shown in Figure 3-1, “CPB Server and Web Client Installer
wizard welcome screen” (p. 3-3).
Figure 3-1 CPB Server and Web Client Installer wizard welcome screen
Note that for ease of viewing, only the right side of the wizard window is shown in
subsequent figures.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-3
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 Click Next> to continue. The resulting screen provides the directory location to which the
CPB server will be downloaded. The default is C:\Program Files\PhM as shown in Figure
3-2, “CPB server directory selection” (p. 3-4). To choose an alternate location, use the
Browse button.
....................................................................................................................................................................................................................................
3-4 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 Click Next> to continue. If the Warning message shown in Figure 3-3, “Disk space
warning” (p. 3-5) displays, there may not be enough free disk space available to continue
with this operation. Return to the “System requirements” (p. 3-2) and verify the
requirements are met for the server. When the requirements are met, return to the “Install
the CPB Tool” (p. 3-2).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-5
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 Click Next> to continue. If there is already a CPB Server installed, the option is provided
to upgrade or perform a new installation as shown in Figure 3-4, “CPB server upgrade or
new installation option” (p. 3-6). Select either Upgrade or New Installation then click the
Next> button. If there is no previously installed CPB Server, proceed to the next step.
....................................................................................................................................................................................................................................
3-6 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 Set the MySQL database port. The default is 3306 as seen in Figure 3-5, “MySQL
database port selection” (p. 3-7).
...................................................................................................................................................................................................
6 Click Next> to continue. Choose the CPB web server port. The default is 80 as seen in
Figure 3-6, “CPB web server port selection” (p. 3-7).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-7
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 Click Next> to continue. On the resulting screen, set the New Maximum Java VM size
(MB) between 610 and 1920 MB. The default size is 610 MB, and the current and
recommended values are provided. Refer to Figure 3-7, “New maximum Java VM size
provisioning” (p. 3-8).
....................................................................................................................................................................................................................................
3-8 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
8 Click Next> to continue. On the resulting screen, set the New Database Pool Size (MB)
between 64 and 640 MB. The current and recommended database pool sizes are
provided. Refer to Figure 3-8, “Database pool size provisioning” (p. 3-9).
...................................................................................................................................................................................................
9 Click Next> to continue. Choose the type of account to start Windows services. If Use
Local System Account is selected, proceed to Step 11. If a specific account and password
is to be used, select the Specify an account and password option and continue to Step
10.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-9
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
10 Click Next> to continue. In the resulting window, provision the account and password to
be used. Take note of the requirements at the top of the window regarding the user
account and permissions. Refer to Figure 3-10, “Set account and password” (p. 3-10).
When the account information is complete, proceed to Step 11.
....................................................................................................................................................................................................................................
3-10 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
11 Click Next> to continue. Review the Warning and information presented in the resulting
screen as seen in Figure 3-11, “CPB server ready to install” (p. 3-11). Verify all
conditions are met. If they are not, close the applications specified. When ready to
proceed with the CPB server and client installation click Next>to continue.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-11
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
12 The installation manager installs the required files. A series of status update screens
displays as seen in Figure 3-12, “Server file installation update status” (p. 3-12), during
which time the <Back and Next> buttons are grayed out.
....................................................................................................................................................................................................................................
3-12 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Installation
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
13 Once the CPB server and client installation is complete, the completion screen displays as
seen in Figure 3-13, “CPB server installation complete” (p. 3-13). Click Finish to exit the
installation wizard.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-13
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Launch the CPB Tool
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
2 In the browser's URL, type http://<IP>/cpb and Enter where <IP> is the IP address
of the CPB Tool server. For example: http://135.244.xxx.xxx/cpb
Alternatively, in the browser's URL, type http://<hostname>:<port> and Enter,
where <hostname> is the name or IP address of the server (in many deployments the CPB
Tool server host name will be localhost), and <port> is the port that the server is using for
the CPB Tool. The default port is 80 but a different port may have been configured when
the CPB Tool was installed (see Step 6 and Figure 3-6, “CPB web server port selection”
(p. 3-7) for port number selection). An example of the URL in a Google Chrome browser
is in Figure 3-14, “CPB Tool URL example” (p. 3-14).
....................................................................................................................................................................................................................................
3-14 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Launch the CPB Tool
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 The Login window opens, as shown in Figure 3-15, “CPB Login screen” (p. 3-15) . If
logging in for the first time, use the admin login and the default password (tropxnms).
Otherwise, use an established login and password. Click the Login button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-15
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Launch the CPB Tool
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 If logging in for the first time, a prompt to change the admin password displays as shown
in Figure 3-16, “Admin password change” (p. 3-16).
...................................................................................................................................................................................................
5 In the New Password field, enter a new password using the following constraints:
• Must begin with an alphabet
• Must have at least 6 characters, but no more than 32 characters
• Must contain one numeric digit (0, 1, ... 9)
• The same character cannot repeat more than 3 times consecutively
• The new password cannot be equal to the old one
• Cannot be a repeat of the username or its reverse
• Must not have special characters other than ! @ # $ % ^ * ( ) _ + - = [ ] { } | ; : , . / ?
• Refer to the Password Complexity information provided in the lower section of the
password change window for additional details.
...................................................................................................................................................................................................
6 In the Confirm Password field, re-type the password entered in the previous step.
....................................................................................................................................................................................................................................
3-16 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Launch the CPB Tool
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 Click the OK button. The main Commissioning and Power Balance window opens. The
next sections of this document describe the functionality in the CPB Tool main menu:
File, View, Commissioning, Admin, and Help as shown in Figure 3-17, “CPB Tool menus
in main window” (p. 3-17).
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-17
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Network administration
Overview
The CPB Tool allows the user to add and delete nodes, discover services, store EPT
designs, export service demands to EPT, and administer user accounts. This section
provides the information about the administration functions. From the CPB Tool main
menu, administration functions are found under the File, View and Admin commands.
File menu
The File menu contains the following functions:
....................................................................................................................................................................................................................................
3-18 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
View menu
The View menu contains the following functions:
Admin menu
The Admin menu contains the following functions:
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-19
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-20 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Help menu
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-21
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Prerequisite
To begin administration, first launch the CPB Tool from the PC or from the 1354
RM-PhM and login with the appropriate authentication information. The main
Commissioning and Power Balance window opens as shown in Figure 3-22, “CPB Tool
main window” (p. 3-22).
Each of the procedures that follow require the main Commissioning and Power Balance
window to be open, and proceed from that point.
Add a new NE
Follow the steps below to add a new managed NE.
...................................................................................................................................................................................................
1 From the CPB Tool main menu, select File > New NE to add a managed NE.
Alternatively, click the Create an NE icon from the Icon bar, as shown in Figure 3-23,
“Create an NE icon” (p. 3-22)
....................................................................................................................................................................................................................................
3-22 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Result: The New NE window opens as shown in Figure 3-24, “New NE window”
(p. 3-23).
...................................................................................................................................................................................................
2 Edit the information in the NE Details, Keep Alives, and Association Parameters
sections as necessary. Verify the information is correct and click the Create button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-23
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 The new NE is added to the list of NEs on the CPB Tool main window with the
Discovery status set to In Progress. The Connected status may have a red color status
and No indication until the node is connected/visible by the CPB Tool, at which point the
red status changes to green with a Yes indication but remains In Progress. Refer to Figure
3-25, “Discover new NE” (p. 3-24) for an example.
...................................................................................................................................................................................................
Delete NE
Follow the steps below to delete an NE from the managed NE list.
....................................................................................................................................................................................................................................
3-24 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the list of NEs in the CPB Tool main window, select the NE to be deleted. It will
highlight in gray when selected as shown in “Delete NE” (p. 3-25).
...................................................................................................................................................................................................
2 From the CPB Tool main menu, select File > Delete NE to delete the selected NE.
Alternatively, double-click the desired NE in the Optical Nodes list. The Delete NE
window opens, as shown in Figure 3-26, “Delete NE window” (p. 3-25). Verify the node
parameters listed correspond to the correct NE to delete. Click on either the Delete or
Force Delete button.
Note: If there are services in the NE, select Force Delete to delete the NE.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-25
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The CPB Tool returns to the main window and the deleted NE no longer is listed in the
list of managed nodes.
E...................................................................................................................................................................................................
N D O F S T E P S
Discover services
Follow the steps below to discover services on the network.
...................................................................................................................................................................................................
1 From the main CPB Tool menu, select File > Discover Services. The Discovering
Services window opens, as shown in Figure 3-27, “Discovering services in progress”
(p. 3-26).
....................................................................................................................................................................................................................................
3-26 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 When the services discovery completes a notification displays, as shown in Figure 3-28,
“Discovery complete” (p. 3-27).
...................................................................................................................................................................................................
3 Click the Close button to return to the main CPB Tool window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-27
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the main CPB Tool menu, select File > Store EPT Design .... The Store EPT
Design window opens, as shown in Figure 3-29, “Store EPT Design ” (p. 3-28).
...................................................................................................................................................................................................
2 To load the EPT design file, click the Select Design File button. The Select EPT Design
File window opens, as shown in Figure 3-30, “Select EPT Design File” (p. 3-28).
....................................................................................................................................................................................................................................
3-28 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 Browse to the desired EPT design file and click OK. The path to which the EPT design
file will be saved displays in the window as shown in Figure 3-31, “Completed Store EPT
Design window” (p. 3-29)
...................................................................................................................................................................................................
4 To load the EPT deployed file, click the Select Deployed File button. The Select EPT
Deployed file window opens, as shown in Figure 3-32, “Select EPT Deployed File”
(p. 3-29).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-29
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 Browse to the desired EPT deployed file and click OK. The path to which the EPT
deployed file is saved displays in the window as shown in Figure 3-31, “Completed Store
EPT Design window” (p. 3-29)
...................................................................................................................................................................................................
6 Click the Confirm button. The EPT design and deployed files are saved and a
confirmation window displays as shown in Figure 3-33, “Store EPT Design File
confirmation window” (p. 3-30). Click the OK button to return to the main CPB Tool
window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
3-30 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the CPB Tool main menu, select File > Service Demand Export to EPT. The EPT
Export Wizard: Overview window opens, as shown in Figure 3-34, “EPT Export Wizard:
Overview” (p. 3-31).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-31
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 Click Next> to continue. The NE Selection window opens, as shown in Figure 3-35, “NE
Selection” (p. 3-32).
Note: Only connected 1830 node(s) can be selected. The 1696 nodes are not
supported.
...................................................................................................................................................................................................
3 In the Network Element field click the down arrow to display the list of NEs. Select the
NE for which the network and services configuration will be exported. To select all of the
NEs, select All from the list of NEs. If desired, to force service discovery, check the Force
service discovery checkbox. Note: Services on the selected NEs must be discovered
prior to retrieving the export file. Click the Next>button.
....................................................................................................................................................................................................................................
3-32 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The EPT Export Stages opens and displays the EPT Export Stages and Progress Log as
seen in Figure 3-36, “EPT Export Stages and Progress Log” (p. 3-33). When complete,
the Completed check box is checked and Complete displays in the Result field, as shown
in Figure 3-37, “EPT Export completed successfully” (p. 3-33).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-33
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 The last line of the Progress Log indicates the location of the saved EPT export file. Click
the Next> button and a link to download the report displays in the Finish page, as seen in
Figure 3-38, “EPT export file download” (p. 3-34).
...................................................................................................................................................................................................
6 Click the Download Report link to download the XML file or Download Plain File to
download the EPT file. Otherwise click the Finish button in the lower right of the screen
to return to the main CPB Tool window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
3-34 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Exit the CPB Tool
...................................................................................................................................................................................................
1 To exit the CPB Tool, either select File > Exit, or close the window using the X button in
the upper right of the main window. In the Confirmation Navigation window, click Leave
this Page to exit the CPB Tool, or Stay on this Page to continue using the CPB Tool, as
shown below.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-35
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Resynchronize NE
...................................................................................................................................................................................................
1 Complete the steps in the “View optical nodes” (p. 3-37) to display the list of NEs. The
list looks similar to that shown in Figure 3-39, “CPB Tool window with Optical Nodes
tab open” (p. 3-36).
Figure 3-39 CPB Tool window with Optical Nodes tab open
...................................................................................................................................................................................................
2 From the list of NEs, select an NE to resynchronize. From the CPB Tool main menu,
select View > Resynchronize. The Resynchronize window displays, as shown in Figure
3-40, “Resynchronize window” (p. 3-36).
....................................................................................................................................................................................................................................
3-36 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 Click OK to begin the resynchronization. The Discovery field for the selected NE displays
In Progress. Select View > Refresh to observe the Discovery field change to Successful,
indicating the resynchronization is complete.
E...................................................................................................................................................................................................
N D O F S T E P S
1 From the main CPB Tool menu, select View > Optical Nodes to open the Optical Nodes
tab if it is closed. If closed, the main CPB Tool window looks similar to that shown in
Figure 3-41, “CPB tool window without optical nodes tab open” (p. 3-37).
Figure 3-41 CPB tool window without optical nodes tab open
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-37
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the CPB Tool main menu select Admin > User Accounts. The Account
Management window displays, as shown in Figure 3-42, “Account Management window”
(p. 3-38).
....................................................................................................................................................................................................................................
3-38 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 Select the New User button in the upper left of the Account Management window to
create a new user. The New User Account... window opens as shown in Figure 3-43,
“New User Account window” (p. 3-39).
...................................................................................................................................................................................................
3 Fill in the information as indicated, including a unique username and a password which
follows the Password complexity rules at the bottom of the window. Check the Change
Password at first login checkbox if the new user is to change their password after the
first CPB Tool login. Set the values in the Max Password Age (day 0 = unlimited, the
Max Inactivity Period (days 0 = unlimited), and the Max Concurrent Sessions (0 =
unlimited) fields. From the User Role drop-down selection, set the new user to have
admin, provisioner or observer capability and click the Confirm button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-39
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The new user is listed in the Account Management window as shown in Figure 3-44,
“Account Management window with new user” (p. 3-40), where an observer user named
CPBToolUser was added.
E...................................................................................................................................................................................................
N D O F S T E P S
Edit user
Complete the following steps to edit a user.
....................................................................................................................................................................................................................................
3-40 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the CPB Tool main menu select Admin > User Accounts. The Account
Management window displays, as shown in Figure 3-45, “Account Management window”
(p. 3-41).
...................................................................................................................................................................................................
2 From the Account Management window, select the user for which the properties will be
modified. The selected User Name row is highlighted in gray and the Edit User button is
no longer grayed out. Click the Edit User button. The Modify Account Properties...
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-41
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
window opens as shown in Figure 3-46, “Modify Account Properties... window”
(p. 3-42). The currently provisioned data for the selected user (in this case CPBToolUser)
is shown, with the exception of the password.
...................................................................................................................................................................................................
3 Modify the parameters as needed, including the password, account access, password age,
inactivity period, concurrent sessions and user role. The possible account access options
are shown in Figure 3-47, “Account access options” (p. 3-42) and the possible user roles
are shown in Figure 3-48, “User role options” (p. 3-42). Passwords must comply with the
Password Complexity as shown previously in Figure 3-43, “New User Account window”
(p. 3-39).
....................................................................................................................................................................................................................................
3-42 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 When the modifications are complete, click the Confirm button and the CPB Tool returns
to the Account Management screen.
E...................................................................................................................................................................................................
N D O F S T E P S
Delete user
Complete the following steps to delete a user.
...................................................................................................................................................................................................
1 From the CPB Tool main menu select Admin > User Accounts. The Account
Management window displays, as shown in Figure 3-49, “Account Management window”
(p. 3-43).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-43
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 From the Account Management window, select the user to be deleted. The selected User
Name row is highlighted in gray and the Remove User button is no longer grayed out.
Click the Remove User button. A removal confirmation window appears as shown in
Figure 3-50, “Remove User Account confirmation window” (p. 3-44).
...................................................................................................................................................................................................
3 Verify the user account specified is the correct one to remove then click the Yes button.
...................................................................................................................................................................................................
4 From the Account Management window, click the Refresh List button to refresh the list
of current valid user accounts.
...................................................................................................................................................................................................
5 Close the Account Management window by clicking the X in the upper right corner.
E...................................................................................................................................................................................................
N D O F S T E P S
Change password
Complete the following steps to change the current user password.
....................................................................................................................................................................................................................................
3-44 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the CPB Tool main menu, select Admin > Change Password. The Password
Management window opens, as shown in Figure 3-51, “Password Management window”
(p. 3-45).
...................................................................................................................................................................................................
2 Enter the current password for the currently logged-in user in the first field. Select a new
password using the guidelines in Password complexity field, as shown in Figure 3-51,
“Password Management window” (p. 3-45).
...................................................................................................................................................................................................
3 Enter the new password in both the New Password field and the Confirm Password field.
...................................................................................................................................................................................................
4 Click the Confirm button to confirm the password change and return to the main CPB
Tool window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-45
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
Set ASON file transfer settings
Complete the following steps to set the ASON file transfer settings.
...................................................................................................................................................................................................
1 From the CPB Tool main menu, select Admin > ASON File Transfer Settings .... The
ASON File Transfer Setting window displays, as shown in Figure 3-52, “ASON File
Transfer Settings window” (p. 3-46).
....................................................................................................................................................................................................................................
3-46 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 To enter or edit TFTP, FTP or SFTP settings for the named server, click the button next to
the desired setting to activate the appropriate section of the window and make the desired
entries. To test the settings, click the Test configuration button in the settings section in
which changes have been made.
...................................................................................................................................................................................................
3 When changes have been made and tested, click the Confirm button. A confirmation
window is displayed, as shown in Figure 3-53, “Confirm Changes for ASON File
Transfer window” (p. 3-47).
...................................................................................................................................................................................................
4 Click the OK button. The ASON file transfer setting changes are saved, and the CPB Tool
main window displays.
E...................................................................................................................................................................................................
N D O F S T E P S
Help menu
Complete the following steps to display CPB Tool Help menu information.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-47
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration Network administration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the main CPB Tool main menu, select Help > About to view the CPB Tool product
information, including release version and build, as shown in Figure 3-54, “About CPB
Web GUI window” (p. 3-48). To close the About CPB Web GUI window, click the X in
the upper right corner, or click the Close button at the bottom of the window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
3-48 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration RADIUS server and user authentication
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-49
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration RADIUS server and user authentication
....................................................................................................................................................................................................................................
Configure CPB Tool to use RADIUS authentication
Once initially logged into the CPB Tool, admin users can select authentications so that
Local , RADIUS, or RADIUS then local authentication is configured. If RADIUS
authentication is chosen, it can be configured for one or two RADIUS servers.
...................................................................................................................................................................................................
1 From the main CPB Tool window, select to Admin > User Authentication. The User
Authentication window displays as shown in Figure 3-55, “User Authentication window”
(p. 3-50).
....................................................................................................................................................................................................................................
3-50 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
CPB Tool administration RADIUS server and user authentication
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
2 From the Authentication Behavior drop-down menu, choose the authentication order.
The choices are Local, RADIUS, or RADIUS then local as seen in Figure 3-56,
“Authentication Behavior drop down options” (p. 3-51).
...................................................................................................................................................................................................
3 If RADIUS or RADIUS then local is selected, specify the RADIUS server configuration
properties:
In the RADIUS Server 1 section, do the following:
1. Check the RADIUS Enable check box. This enables the attribute fields for RADIUS
server 1.
2. In the Hostname: field, specify the hostname or IP address of RADIUS server 1.
3. In the Port: field, specify the port to which to connect on RADIUS server 1 (default is
1812).
4. In the Shared Secret: field, specify the shared secret.
5. In the Confirm Shared Secret field, retype the shared secret.
6. In the Timeout (seconds): field, specify the RADIUS time-out in seconds (range 1 -
30, default is 3).
7. In the Retries field, specify the number of RADIUS retries (range 0 - 10, default is 2).
...................................................................................................................................................................................................
4 If a second RADIUS server will be configured, repeat the previous step for RADIUS
Server 2.
...................................................................................................................................................................................................
5 In the Maximum Failed Login Attempts field, specify the maximum number of failed
login attempts that are permitted before the user is logged out. This field applied only to
local authentication, not to RADIUS authentication. The default value is 5.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 3-51
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
CPB Tool administration RADIUS server and user authentication
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 In the confirmation window, click OK to save the settings for System User Authentication
as seen in Figure 3-57, “Confirm Changes for System User Authentication window”
(p. 3-52).
...................................................................................................................................................................................................
8 The User Authentication parameters are saved and the screen returns to the main CPB
Tool window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
3-52 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
4 Commissioning
4
Overview
Purpose
This chapter provides the detailed procedures required to use the Commissioning menu
options in the CPB Tool.
Contents
...................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-1
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Network commissioning background
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-2 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Network commissioning background
....................................................................................................................................................................................................................................
The EPT will produce a commissioning file in .XML format that the CPB Tool uses to
commission the systems. The content of the file depends on the type of equipment found
on each line of a system.
The EPT supports dividing the network into partial systems. In this case the longest
system defined by following Thru In/Out connections of TOADM/ROADM degrees can
be broken up into smaller systems for network commissioning. The EPT user choses the
links to include in the system, however the principle of following Thru In/Out
connections must still be followed within the defined system. Dividing large systems into
smaller ones may be advantageous to overcome logistical situations such as NEs in
difficult to access locations, time constraints, or geographical constraints due to the
distance between NEs.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-3
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Network commissioning background
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-4 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Network commissioning background
....................................................................................................................................................................................................................................
This document addresses the installation and use of the CPB Tool. For details on using
the CLI or WebUI to make additional adjustments, refer to the Alcatel-Lucent 1830 PSS
Installation and System Turn-Up Guide (Alcatel-Lucent 1830 PSS-16 and PSS-32).
Attention:The user should understand the limitations and use cases for the CPB Tool
wizards by referring to the Alcatel-Lucent 1830 PSS Installation and System Turn-Up
Guide (Alcatel-Lucent 1830 PSS-16 and PSS-32)
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-5
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
Procedure
Follow the steps below to provision a system using the Provision System (using plan)...
wizard.
...................................................................................................................................................................................................
1 Verify all the network elements in the system have been correctly discovered. Refer to the
Alcatel-Lucent 1830 PSS Installation and System Turn-Up Guide (Alcatel-Lucent 1830
PSS-16 and PSS-32) .
...................................................................................................................................................................................................
2 Launch the CPB Tool as described in “Launch the CPB Tool” (p. 3-14). The CPB Tool
main window opens as shown in Figure 4-2, “CPB Tool main window” (p. 4-6).
....................................................................................................................................................................................................................................
4-6 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 From the CPB Tool main menu, select Commissioning > Provision System (using
plan).... The Provision System Wizard: Overview window displays as shown in Figure
4-3, “Provision System Wizard: Overview window” (p. 4-7).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-7
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 Click Next> and the Provisioning options and wizard options window opens as shown in
Figure 4-4, “Provisioning options and wizard options window” (p. 4-8).
....................................................................................................................................................................................................................................
4-8 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 Check the desired boxes (all are recommended); see details for each selection below.
Regardless of which boxes are checked, the Provisioning System wizard verifies the
programmed card slot assignments in the plan match the actual programmed cards in the
node, and verifies the topological connections specified by the plan exist in the network.
• Provision ASON Feasibility parameters – for GMPLS systems the wizard provisions
all the ASON optical impairment entries from the planning tool file for every GMRE
node.
• Pre provision card empty slots to match card in plan – if a slot in a node is
programmed as empty and the plan specifies a card for that slot, the wizard sets the
programmed card type for that slot to match the plan (i.e. preprovision the slot).
• Set existing non-OT cards 'admin up' – the wizard sets the administrative state to
up for every card in the node that is not an OT card.
• Power Parameters
If checked, the wizard sets the following parameters
– WT Decoder Usage Type
– Gain Adj Sched Base
– Egress SRS Tilt Calc Output Loss
– Gain Adj Auto Enabled
– SRS Tilt Maintenance Mode
– Egress SRS Tilt Pre Fraction
– WTOCM Conn Loss
– Gain Adj Timer Length
– Ingress SRS Tilt Post Fraction
– SRS Tilt Adj Auto Enabled
– Gain Adj Timer Period
– LH Launch Attenuation
– Och Technology Parameters
• Provision ASON File transfer parameters – the wizard sets the ASON file transfer
parameters for GMRE nodes. The CPB Tool parses the optical impairment lookup
tables out the planning tool file and stores a new XML file in the default FTP
directory, where the node can retrieve it.
• Set Optical Power Level Management (OPLM) attributes – Full OLPM -
provisions all OLPM-related attributes from the planning tool file including the
port-to-port losses.
• Verbose Logging – adds more detailed log messages while the wizard is running,
before provisioning and after provisioning OPLM attribute values on amplifier ports.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-9
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 Click the Next> button. The Select Planning Tool Output File window displays as shown
in Figure 4-5, “Select Planning Tool Output File window” (p. 4-10).
....................................................................................................................................................................................................................................
4-10 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 Click the Select File button. The Select Planning Tool Output File window displays, as
shown in Figure 4-6, “Select Planning Tool Output File window” (p. 4-11).
...................................................................................................................................................................................................
8 Click the Browse button and browse to the folder containing the PT commissioning file
for the system to be commissioned, select the file, and click Open. Note that the PT
commissioning file will be in the form of an XML file. When the file displays in the
Browse field, click OK. The path for the PT commissioning file displays in the Select
Planning Tool Output File window, as shown in Figure 4-7, “Completed Select Planning
Tool Output File window” (p. 4-11).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-11
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
9 Click the Next button and the Node list window displays as shown in Figure 4-8, “Node
list window” (p. 4-12)
...................................................................................................................................................................................................
10 Select each node to be commissioned and move it to the right half of the window using
the arrow > button. Only currently managed nodes can be selected for provisioning. If the
selected node is not in the list of currently managed nodes, an error message displays in
the top left corner of the provision system window with this indication. All of the nodes
can be selected for provisioning by clicking the double arrow >> button. A node is
....................................................................................................................................................................................................................................
4-12 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
excluded from provisioning by selecting it on the right and clicking the < button. Verify
the nodes to be provisioned are on the right, and the nodes to be excluded are on the left.
When node selection is complete, click the Next>> button.
...................................................................................................................................................................................................
11 If Add/Drop blocks are designed for a node, the Add Drop Block list window is
displayed, as shown in Figure 4-9, “Add Drop Block list window” (p. 4-13), listing all the
Add/Drop blocks in the commissioning file. Select each Add/Drop block to be
commissioned and move it to the right half of the window using the arrow > button. All of
the Add/Drop blocks can be selected for provisioning by clicking the double arrow >>
button. An Add/Drop block is excluded from provisioning by selecting it on the right and
clicking the < button. Verify the Add/Drop blocks to be provisioned are on the right, and
the Add/Drop blocks to be excluded are on the left. If no Add/Drop blocks are selected for
commissioning, click the None button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-13
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
12 Click the Next button to start the provisioning process. The Provisioning Stages window
displays as shown in Figure 4-10, “Provisioning Stages window” (p. 4-14). The progress
displays in two forms: the Provisioning Stages upper half of the window shows the
progress and status for each of the provisioning steps, while the Progress Log lower half
provides the Progress Log including server messages detailing actions taken and failure
reasons if applicable. The log shows more messages if the option for verbose logging was
enabled in Step 5.
...................................................................................................................................................................................................
13 Review the error report and troubleshoot any problems encountered. Refer to the site
documentation and check for discrepancies between what is expected and what is
installed. Once corrections and troubleshooting are complete, use the Retry button to
continue the provisioning for the failed steps (steps that previously completed
successfully are not re-provisioned).
....................................................................................................................................................................................................................................
4-14 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Provision System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
14 When all steps show Completed, click the Next> button. The Finish page displays as
shown in Figure 4-11, “Provision System wizard Finish page” (p. 4-15). Click the Finish
button. This will take you back to the CPB Tool main window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-15
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
Procedure
Use the following steps to commission a greenfield network.
...................................................................................................................................................................................................
2 If the CPB Tool is not already running, launch it as described in “Launch the CPB Tool”
(p. 3-14).
....................................................................................................................................................................................................................................
4-16 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 Select Commissioning -> Commission Greenfield System (using plan)... from the CPB
Tool main menu. The Commission Greenfield System Wizard: Overview window opens
as shown in Figure 4-12, “Commission Greenfield System Wizard: Overview window”
(p. 4-17).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-17
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 Click Next. The Select Commissioning Mode window displays as shown in Figure 4-13,
“Select Commissioning Mode window” (p. 4-18).
...................................................................................................................................................................................................
5 Make sure the Clean Slate radio button is selected and click Next>. The TL1 autonomous
Messaging Option window displays as shown in Figure 4-14, “Select TL1 autonomous
Messaging Option window” (p. 4-19).
....................................................................................................................................................................................................................................
4-18 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
Note: If the commissioning wizard was run previously but did not complete, use the
Continue commissioning radio button so the previously completed lines are not
recommissioned.
...................................................................................................................................................................................................
6 The TL1 autonomous messages option shown above allows the user to automatically
disable and re-enable reporting of these message on the nodes during and after
commissioning.
If this is a greenfield commissioning, there is normally no need to inhibit alarms.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-19
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
If the network is already monitored by a network management center, it may be desirable
to inhibit alarms to prevent the monitoring center from getting overwhelmed with alarms.
If the Inhibit TL1 autonomous messaging before any power adjust performed box is
checked, the Release inhibition of TL1 autonomous messaging (after completion) box
should also be checked.
...................................................................................................................................................................................................
7 Click Next>. The Power Provisioning Options window displays as shown in Figure 4-15,
“Power Provisioning Options window” (p. 4-20). Select the desired power management
parameters. To select all parameters, check the Provisioning Options box. To deselect all
parameters, uncheck the Provisioning Options box.
....................................................................................................................................................................................................................................
4-20 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
8 Click the Next> button. The Select Planning Tool Output File window displays as shown
in .
...................................................................................................................................................................................................
9 Click the Select File button. The Select Planning Tool Output File window displays, as
shown in Figure 4-17, “Select Planning Tool Output File window” (p. 4-21).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-21
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
10 Click the Browse button and browse to the folder containing the PT commissioning file
for the system. The file will be an XML file generated by the LPT or EPT for this system.
Click Open. When the file displays in the Browse field, click OK. The path for the PT
commissioning file displays in the Select Planning Tool Output File window, as shown in
Figure 4-18, “Completed Select Planning Tool Output File window” (p. 4-22).
....................................................................................................................................................................................................................................
4-22 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
11 Click the Next button and the Commissioning Stages window display as shown in Figure
4-19, “Commissioning Stages progress window” (p. 4-23). The progress of the
commissioning is displayed and logged.
...................................................................................................................................................................................................
12 Wait until all the stages show Completed. If any commissioning step has failed, a Retry
button replaces the Next button and the failed step can be retried without reprovisioning
any of the steps which passed successfully.
...................................................................................................................................................................................................
13 Scroll through the progress log, check for any error messages and troubleshoot as
appropriate. After troubleshooting, rerun the wizard by going back to Step 5 and choosing
the Continue commissioning radio button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-23
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
Note: The wizard may fail to commission the system for the following reasons.
• The actual network topology does not match the planned topology.
• The actual network losses do not match the planned losses.
• The amplifier gain values required are outside of the planned amplifier range
specified in the planning tool commissioning file.
...................................................................................................................................................................................................
14 Click the Next> button and the Finish page appears as shown in Figure 4-20,
“Commissioning Greenfield System Finish page” (p. 4-24).
....................................................................................................................................................................................................................................
4-24 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commission Greenfield System (using plan)... wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
15 To see the generated report file, click the View Report button, and a loss report displays.
To save the report, click Download Report then save to a selected location.
Note: Refer to “Create System Loss Report wizards” (p. 4-43) for detailed
information on the loss report.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-25
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
Prerequisites
There must be communication established between all nodes in the network.
There must be a common software release running on all nodes.
Procedure
...................................................................................................................................................................................................
1 Verify the type of system is ROADM, TOADM ring, TOADM linear, or mixed
TOADM/FOADM. If it is a FOADM system, the CPB Tool Power Balance System
wizards cannot be used. Refer to the Alcatel-Lucent 1830 Photonic Service Switch
32/16/32S (1830 PSS-32/PSS-16/PSS-32S) Installation and System Turn-Up Guide.
...................................................................................................................................................................................................
2 If the CPB tool is not already running, launch it as described in “Launch the CPB Tool”
(p. 3-14).
...................................................................................................................................................................................................
3 Choose the Power Balance System wizard method from the table below.
If... Then...
Re-balancing the system powers with the Select Commissioning > Power Balance
existing power management target points System... from the top menu. Proceed to Step
4.
Choosing a new PT file with new power target Select Commissioning > Power Balance
points for re-balancing... System (using plan)... from the CPB Tool
main menu. Proceed to Step 9..
....................................................................................................................................................................................................................................
4-26 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The System Power Balancing Wizard: Overview window opens as seen in Figure 4-21,
“System Power Balancing Wizard: Overview” (p. 4-27). After reviewing the information
provided, click Next> to continue.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-27
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 The Port Selection window opens as seen in Figure 4-22, “Port Selection window”
(p. 4-28). From the left side of the window, select the node on which to begin the power
balancing. The available ports then appear in the right side of the window. Select the
appropriate port on the right.
...................................................................................................................................................................................................
6 PROCEED WITH CAUTION. When the Next> button is selected, large power
fluctuations may occur, and can be service affecting. To back out, select the Cancel
button. The power balancing progress window opens and shows the progress of the steps
being performed as well as the progress log.
...................................................................................................................................................................................................
7 Wait until all the stages show Completed. If any power balancing step has failed, scroll
through the progress log, check for any error messages and troubleshoot as appropriate.
After troubleshooting, the Power Balancing System Wizard may be run again.
...................................................................................................................................................................................................
8 Click the Next> button and the Finish page displays. From this page, select the View
Report button to view the generated power loss report. Select Download Report to save
the file to a selected location.
This completes the procedure to power balance the system using the existing power
management target points.
Note: Refer to “Create System Loss Report wizards” (p. 4-43) for detailed
information on the loss report.
....................................................................................................................................................................................................................................
4-28 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
9 The System Power Balancing Wizard: Overview screen opens as seen in Figure 4-23,
“System Power Balancing Wizard: Overview using PT file” (p. 4-29). After reviewing the
information provided, click the Next> button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-29
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
10 The Power Provisioning options window opens as shown in Figure 4-24, “Power
Provisioning options window” (p. 4-30). Select the desired power management
parameters. To select all parameters, check the Provision Power Mgmt Paramters box.
To deselect all parameters, uncheck the Provision Power Mgmt Paramters box.
....................................................................................................................................................................................................................................
4-30 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
11 Click the Next> button. The Select Planning Tool Output File window displays as shown
in Figure 4-25, “Select Planning Tool Output File window” (p. 4-31).
...................................................................................................................................................................................................
12 Click the Select File button. The Select Planning Tool Output File selection window
displays, as shown in Figure 4-26, “Select Planning Tool Output File window” (p. 4-31).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-31
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
13 Click the Browse button and browse to the folder containing the PT commissioning file
for the system. The file will be an XML file generated by the LPT or EPT for this system.
Click Open. When the file displays in the Browse field, click OK. The path for the PT
commissioning file displays in the Select Planning Tool Output File window, as shown in
Figure 4-27, “Completed Select Planning Tool Output File window” (p. 4-32).
...................................................................................................................................................................................................
14 PROCEED WITH CAUTION. When the Next> button is selected, large power
fluctuations may occur, and can be service affecting. To back out, select the Cancel
button. The power balancing progress window opens and shows the progress of the steps
being performed as well as the progress log.
...................................................................................................................................................................................................
15 Wait until all the stages show Completed. If any power balancing step has failed, scroll
through the progress log, check for any error messages and troubleshoot as appropriate.
After troubleshooting, the Power Balancing System Wizard may be run again.
...................................................................................................................................................................................................
16 Click the Next> button and the Finish page displays. From this page, select the View
Report button to view the generated power loss report. Select Download Report to save
the file to a selected location.
This completes the procedure to power balance the system using the PT file.
....................................................................................................................................................................................................................................
4-32 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Power Balance System wizards
....................................................................................................................................................................................................................................
Note: Refer to “Create System Loss Report wizards” (p. 4-43) for detailed
information on the loss report.
E...................................................................................................................................................................................................
N D O F S T E P S
Overview
The System Loss report is generated as an HTML file. Errors are highlighted in red.
Warnings are highlighted in yellow.
This section contains the following topics:
• “System Loss Report features” (p. 4-34)
• “System Loss Report organization” (p. 4-34)
• “System Loss Report content” (p. 4-35)
• “System Loss Report terms and definitions” (p. 4-37)
• “Loss value field of System Loss Report” (p. 4-38)
• “Notes field of System Loss Report” (p. 4-39)
• “Highlighting in the System Loss Report” (p. 4-40)
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-33
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
System Loss Report features
The System Loss Report has the following attributes:
• List of failed auto power management adjustments at the beginning of the report
• Segregated node/span view and summary
• Status of the last ingress/egress adjustment performed for each node
• Color coding and text to indicate suspect components and out of spec components.
Highlighting is conditional on the status of the last adjustment
• Auto-generation and save
• Date/time of report generation and name of planning tool commissioning file.
....................................................................................................................................................................................................................................
4-34 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
Field Explanation
Path - Port from The starting point for the measured loss
Path - Port to The end point for the measured loss. The measured loss
is between 'Port from' to 'Port to'
Expected Loss Range - PT Min Loss The minimum planned loss or gain between 'Port from'
(Gain) dB and 'Port to'
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-35
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
Table 4-1 System Loss Report fields (continued)
Field Explanation
Expected Loss Range - PT Max The maximum planned loss or gain between 'Port from'
Loss (Gain) dB and 'Port to'
Notes Displays additional information. See 'Notes for the
Network Element Loss Report' below.
Measured Loss (dB) ITU<channel The measured loss for each ITU channel provisioned
number> between the ingress line and egress line.
....................................................................................................................................................................................................................................
Note: The loss for a section amplified by external amplifier modules or the RA2P or
A2P2125 packs is the net loss. Therefore, the loss of the outside plant fiber span is not
separable from the net loss for these sections. The planned EPT range reflects the
expected gain and component losses.
Term Explanation
NE loss trace 'A to Z' The direction of the commissioning signal
NE loss trace 'Z to A' The direction of the commissioning signal
Actual Loss (Gain) (dB) The Actual loss is the measured loss between two consecutive
Wavelength Tracker detect points. In the case of an amplifier, the
Actual Gain is the current gain setting of the amplifier.
The actual loss should fall between the values specified for the
EPT Min and Max losses. If the adjusts for the node are successful
then no highlighting is applied to the components in the node and
losses outside the range are simply noted as "Loss
accommodated". If the adjustment for topology section failed
recently, then highlighting is applied to the section of topology for
losses out of range, and action by the user is required. See below
for highlighting rules.
In the case of a loss report generated after the Greenfield
commissioning wizard has run, some lines may not have been
completed, either due to upstream failures or because lines were
excluded by the wizard. In this case the Actual loss field indicates
n/a for the loss measurements because losses have not been
calculated yet for those lines of the system.
PT Max Loss (Gain) (dB) The maximum expected card or span loss that is used to plan the
network.
The maximum span loss is obtained by the sum of the nominal
span loss and user defined patch-panel and fiber loss margin.
Maximum card loss is defined by considering the loss of the
specific component and appropriate connector losses within and
between cards. The component loss is obtained from a statistical
analysis of the component loss data. Total losses within an NE are
derived by a statistical RMS addition of all the individual cards
along the through path of the NE.
For sections where external modules provide gain, or a Raman
amplifier provides gain, the expected gain is included in calculated
the planned loss.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-37
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
Table 4-2 Loss report terms and definitions (continued)
Term Explanation
PT Nominal Loss (Gain) The nominal card or span loss used to plan the network. Total
(dB) nominal loss within an NE is derived by the linear addition of the
nominal card losses.
PT Min Loss (Gain) (dB) The minimum expected card or span loss used to plan the network.
Loss value Loss value indicates how the loss value reported was obtained.
• Real time: Wavelength Tracker measurement of the loss
• Commission: bulk power measurement of the loss
Notes Provides additional information, as described in “Notes field of
System Loss Report” (p. 4-39).
Text Explanation
Real time Real time Wavelength Tracker readings were used to calculate the loss when
the report was generated. Note that the loss between NEs is always
calculated using the total power readings at the upstream NE and
downstream NE.
Commission Commission is displayed when there are no wavelength services with WT
readings available when the report is generated. The displayed loss is the
loss that was calculated during the last commissioning adjustment.
Commissioning adjustments are defined as:
1. Kitless commissioning adjustments used to commission a system
2. Or, WT based power adjustments when the line has not been
commissioned.
Most recent In some cases, WT readings cannot be used to calculate the loss; the NE
calculates the loss by other methods, and the loss value is retrieved from the
NE. Most Recent indicates the most recent value calculated by the NE has
been retrieved.
....................................................................................................................................................................................................................................
4-38 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
Notes field of System Loss Report
The notes field of a row in the loss report displays additional information to the user.
Note Explanation
Warning: Loss x.x dB too The measured loss is x.x dB higher than the maximum loss.
high. The level "Warning" or "Error" is based on whether the loss is just
outside the PT range within 1 dB, or whether the loss is outside of
the PT range + 1 dB. However, if the adjust succeeds the "Error" is
changed to a "Warning".
Warning: Loss x.x dB too The measured loss is x.x dB lower than the minimum loss.
low.
Error: Loss x.x dB too The measured loss is x.x dB higher than the maximum loss and is
high. associated with a failed power management adjustment.
If the power management adjustment succeeded, this would be a
Warning instead of an error.
Error: Loss x.x dB too The measured loss is x.x dB lower than the minimum loss and is
low. associated with a failed power management adjustment.
If the power management adjustment succeeded, this would be a
Warning instead of an error.
Loss Accommodated. The loss is outside the planned range, but the loss was
accommodated by the auto power management adjustment.
Average attenuation of x.x For a CWR8 Thru, WSS Thru or ROADM thru path x.x dB was
dB applied to range applied to the planned loss range. This equals the applied
attenuation of the optical device in the path.
Power not found No optical power was found that could be used to calculate a loss.
Error: unable to read loss A measured loss couldn't be calculated and a commissioning loss
value was not available on the network element.
(Target gain = xx.x dB) The adjustment function calculated a gain of xx.x dB which did
not fall within the planned gain range.
Loss within 10% of max The measured loss is within 10% of the maximum planned value.
Several components within 10% of the max may cause an auto
power management adjustment to fail.
Upstream loss too high The ingress adjustment has failed and the loss preceding the
ingress LD is too high.
x dB of y dB repair margin Indicates that the ingress adjustment has set the gain of the ingress
consumed LD within the repair margin allocated for this LD. The gain is
approaching the maximum gain planned for this amplifier.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-39
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
Table 4-4 Notes field terms and definitions (continued)
Note Explanation
DCM present <value> dB, Indicates that a dispersion compensation device is between the two
expected 8 to 12 dB detect points used to calculate the loss. The measured loss and
expected range is shown.
Measured loss includes The measured loss value shown in the row includes the gain of the
RA2P or A2P2125 gain RA2P or A2P2125 (net of its own insertion loss) in the calculated
loss and expected loss range.
Integrated EVOA = Indicates the setting of the LD output port integrated variable
<value> dB optical attenuator . This value is reported separately because the
gain setting versus the planning range does not include the EVOA
setting.
Measured loss includes The measured loss value show in the row includes the gain of the
Raman on/off gain Raman amplifier in the calculated loss and expected loss range.
Mid-stage EVOA = Indicates the setting of the mid-stage variable optical attenuator of
<value> dB a hybrid Raman/EDFA LD type. This value is reported separately
to help the user understand the reported loss.
....................................................................................................................................................................................................................................
4-40 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
In the following table, the highlighting rules are explained:
Adjust-
Affected ment
Adjustment Topology Result Highlighting
Ingress Span loss Success No highlighting applied to the rows.
adjustment between Losses that are outside PT Min to PT Max
upstream and are noted as "Loss accommodated" in the
downstream NE. Notes field.
For a TOADM Power The ingress amp is highlighted yellow with a
or ROADM line, adjust Warning message. The preceding span and
port to port warning - other ingress components may also be
losses up to the span repair highlighted yellow with a Warning message.
demultiplexing margin
pack (CWR8, Although the ingress adjust has passed,
violated some of the span repair margin has been
CWR8-88,
WR8-88A(F), used. In this case, the network remains in a
WR2-88) SIG In normal operating state.
of the ingress Although no action is required, the operator
line. may choose to address the warning.
For a FOADM No services No highlighting applied to the rows.
line, the last provi- Losses that are outside PT Min to PT max
point will be the sioned. are noted.
ingress LD port
connected to the Any result Warnings: Components or spans highlighted
SFD. message in yellow with a Warning message may
different indicate a potential problem.
than The measured component or span loss is less
preceding than the PT Min or greater than the PT Max
ones. values, but is within the measurement
accuracy window. Before attempting to fix
the flagged warnings, check for any
components in the Error state.
Errors: Components or spans highlighted in
red with an Error message require attention.
The measured component or span loss is less
than the PT Min or greater than the PT Max
values, including measurement accuracy.
Amplifiers highlighted in red with an Error
message indicate a problem area since the
gain setting required is outside of the
allowed range.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-41
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Understanding the System Loss Reports
....................................................................................................................................................................................................................................
Table 4-5 System Loss Report highlighting (continued)
Adjust-
Affected ment
Adjustment Topology Result Highlighting
Egress For a TOADM Success No highlighting applied to the rows.
adjustment or ROADM line, Losses that are outside PT Min to PT Max
port to port are noted as "Loss accommodated" in the
losses from the Notes field.
demultiplexing
pack SIG port of No services No highlighting applied to the rows.
the ingress line provisioned Losses that are outside PT Min to PT Max
to the external are noted.
egress line Any result Warnings: Components highlighted in
connecting port. message yellow with a Warning message may
For a FOADM different indicate a potential problem.
line, the first than The measured component loss is less than
point will be the preceding the PT Min or greater than the PT Max
first LD port ones. values, but is within the measurement
encountered accuracy window. Before attempting to fix
following the the flagged warnings, check for any
SFDs in the components in the Error state.
direction
Errors: Components highlighted in red with
towards the line,
an Error message require attention. The
and the last point
measured component loss is less than the PT
will be the
Min or greater than the PT Max values,
external egress
including measurement accuracy. Amplifiers
line connecting
highlighted in red with an Error message
port.
indicate a problem area since the gain setting
required is outside of the allowed range.
....................................................................................................................................................................................................................................
4-42 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
Prerequisites
For detailed information on the System Loss Report, see “Understanding the System Loss
Reports” (p. 4-33).
1 If the CPB Tool is not already running, launch it as described in “Launch the CPB Tool”
(p. 3-14).
...................................................................................................................................................................................................
2 Choose the Create System Loss Report wizard method from the table below.
If... Then...
Running the report with the system powers Select Commissioning > Create System Loss
with the existing power management target Report... from the CPB Tool main menu.
points Proceed to Step 3.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-43
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
If... Then...
Choosing a new PT file with new power target Select Commissioning > Create System Loss
points for re-balancing... Report (using plan)... from the CPB Tool
main menu. Proceed to Step 6.
...................................................................................................................................................................................................
3 An overview window appears as shown in Figure 4-29, “System Loss Report Wizard:
Overview window” (p. 4-44). Click the Next> button.
....................................................................................................................................................................................................................................
4-44 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The Port Selection window opens as seen in Figure 4-30, “Port Selection window”
(p. 4-45).
...................................................................................................................................................................................................
5 Select the node in the left portion of the screen, then select the port on the right of the
screen, from which to begin the system loss report. Continue with Step 10.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-45
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 The System Loss Report Wizard: Overview window appears as shown in Figure 4-31,
“System Loss Report Wizard: Overview using plan” (p. 4-46). Click the Next> button.
....................................................................................................................................................................................................................................
4-46 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 The Select Planning Tool Output File window displays as shown in Figure 4-32, “Select
Planning Tool Output File window” (p. 4-47).
...................................................................................................................................................................................................
8 Click the Select File button. The Select Planning Tool Output file selection window
displays, as shown in Figure 4-33, “Select Planning Tool Output File selection window”
(p. 4-47).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-47
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
9 Click the Browse button and browse to the folder containing the PT commissioning file
for the system. The file will be an XML file generated by the LPT or EPT for this system.
Click Open. When the file displays in the Browse field, click OK. The path for the PT
commissioning file displays in the Select Planning Tool Output File window, as shown in
Figure 4-34, “Completed Select Planning Tool Output File window” (p. 4-48).
....................................................................................................................................................................................................................................
4-48 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
10 Click the Next> button and the Power Loss Report Stages window displays as shown in
Figure 4-35, “Power Loss Report Stages window” (p. 4-49).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-49
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
11 Wait until the stages show completed and click the Next> button. The last page appears as
shown in Figure 4-36, “System Loss Report last page” (p. 4-50).
....................................................................................................................................................................................................................................
4-50 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
12 Click the View Report button, and the Commissioning Power Loss Report is displayed as
shown in Figure 4-37, “Sample Commissioning Power Loss Report” (p. 4-51).
Alternatively, click on "Download Report" to save the report to a selected location.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-51
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create System Loss Report wizards
....................................................................................................................................................................................................................................
System Loss Report details
1. Treatment of losses for the CWR8 Thru, WSS Thru, and ROADM Thru path
• Path loss is reported as measured loss and the planned loss will be adjusted by the
average attenuation the VOA device has applied at the time of measurement
•
The notes column indicates the average amount of attenuation in dB applied to the
planned loss range
2. Loss calculations on the loss report
• Average of real-time Wavelength Tracker losses whenever available
• If Wavelength Tracker readings are too low to be used, then total power (DC) is
used to calculate the losses whenever available
• Stored loss calculated during commissioning power adjustments wherever
Wavelength Tracker or DC is not available
• NA is reported if the loss cannot be displayed using one of the above methods
3. Loss report coloring
• Component Loss Level - Ingress Components
– Highlighted components include fiber span, ingress OSC to ingress Amp In and
ingress Amp In to ingress Amp Out; or ingress LD Line In to ingress LD Sig Out
– Highlighted based on status of last ingress adjustment and span (splice) margin
calculation
– During commissioning, error on span (splice) margin violations
– During in-service, warning on span (splice) margin violations
– Red highlighting indicates absolutely defective components
– Yellow highlighting indicates suspect components
• Component Loss Level - Egress Components
– Highlighted components include all components between ingress Amp Out and
egress OSC
– Highlighting based on status of last egress adjustment
– Red highlighting indicates absolutely defective components
– Yellow highlighting indicates suspect components
• – Node Level
– Correlating to the power management event just prior to report generation
– Red highlighting indicates adjustment or accept failed
– White indicates either the adjustment or accept was successful or not run
....................................................................................................................................................................................................................................
4-52 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create NE Loss Report wizard
....................................................................................................................................................................................................................................
Prerequisites
Prior to running the Create NE Loss Report wizard, the user should complete
provisioning of the EPT parameters for the target system. If the system has been
commissioned, this prerequisite is met.
If these parameters are not provisioned, the Network Element Loss Report will not
display a target loss range for the loop or express channels and the expected gain range
for the LDs will also be missing. The user should run the Provision System (using plan)
wizard to provision the required planning tool parameters prior to creating a Network
Element Loss Report. The parameters in Table 4-6, “Minimum EPT parameters for
network element” (p. 4-53) are the minimum set of parameters that must be provisioned.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-53
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create NE Loss Report wizard
....................................................................................................................................................................................................................................
Generate the NE Loss Report
...................................................................................................................................................................................................
1 If the CPB Tool is not already running, launch it as described in “Launch the CPB Tool”
(p. 3-14).
...................................................................................................................................................................................................
2 Select Commissioning > Create NE Loss Report... from the CPB Tool main menu.
...................................................................................................................................................................................................
3 An overview window will appear as shown in Figure 4-38, “NE Loss Report Wizard:
Overview window” (p. 4-54). Click the Next> button.
....................................................................................................................................................................................................................................
4-54 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create NE Loss Report wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The Egress Point Selection window displays as shown in Figure 4-39, “Egress Point
Selection” (p. 4-55).
...................................................................................................................................................................................................
5 In the column on the left there is a list of the currently managed network elements. Select
the desired node and the egress points for that node appear in the middle column. Select
the desired egress point in the middle column and its corresponding ingress point appears
in the right-hand column. If a selected NE is not manually power managed, or if the
egress point selected is not manually power managed, a message indicating "No manually
managed egress ports found for selected NE" appears at the top of the window and the
Next> button is grayed out.
...................................................................................................................................................................................................
6 Once a manually power managed egress point has been selected, click the Next> button.
The Power Loss Report Stages window displays, showing the report stages progress and
the progress log.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-55
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create NE Loss Report wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 Wait until the stages show completed and click the Next> button. The last page will
appear.
...................................................................................................................................................................................................
8 Click the View Report button, and a loss report displays. Alternatively, click Download
Reportto save the report to a selected location.
...................................................................................................................................................................................................
Field Explanation
Path - Port from The starting point for the measured loss
Path - Port to The end point for the measured loss. The measured loss
is between 'Port from' to 'Port to'
Expected Loss Range - PT Min. The minimum planned loss or gain between 'Port from'
Loss (Gain) dB and 'Port to'
Expected Loss Range - PT Max The maximum planned loss or gain between 'Port from'
Loss (Gain) dB and 'Port to'
Notes Displays additional information. See 'Notes for the
Network Element Loss Report' below.
Measured Loss (dB) The measured loss for each ITU channel provisioned
ITU<channel number> between the ingress line and egress line.
There are three sections in the table. The first section is the Target Loss Comparison
section. In this section the loss between the target power per channel at the ingress LD Sig
Out for the ingress line and the egress line LD Line Out is measured. The valid loss range
includes the expected power deviation from the target values.
....................................................................................................................................................................................................................................
4-56 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Create NE Loss Report wizard
....................................................................................................................................................................................................................................
The second section is the WTD Detect Point to Detect Point Losses section. In this
section each row contains the measured loss between two Wavelength Tracker detect
points.
The third section is the Per Channel Status section. In this section, below each ITU
channel column, the status for each channel is reported.
• If the loss is measured and in range, the status is OK
• If the loss is measured and is too high, the status is Too high
• If the loss is measured and is too low, the status is Too low
• If the loss wasn't measured, the status is n/a
The PT Min Lossand PT Max Loss fields show n/a if the planned loss is not set on the
network element, or cannot be calculated, for WTD to WTD losses and the target loss
range, respectively. n/a indicates “not available”.
The Notes field of the loss report
The Notes field contains additional information.
• Power not found - power readings were not available for one or more of the
channels. n/a is shown where the loss for the channel would normally be displayed.
• Error: Unable to calculate target loss range - displays when the planning tool data
required to calculate the target loss range is not available. See table above for the
required planning tool data.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-57
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Create NE Loss Report wizard
....................................................................................................................................................................................................................................
During service turn-up the NE Loss Report can be used as an aide to ensure that the
selected pad for the new service is correct. After adding the attenuating pad for the new
service run the loss report to compare the measured loss for the channel to the target loss
range.
....................................................................................................................................................................................................................................
4-58 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commissioning History wizard
....................................................................................................................................................................................................................................
1 If the CPB Tool is not already running, launch it as described in “Launch the CPB Tool”
(p. 3-14).
...................................................................................................................................................................................................
2 From the CPB Tool main menu, select Commissioning -> Commissioning history... as
shown in Figure 4-40, “Commissioning History... menu selection” (p. 4-59), or select the
Show Commissioning History icon shown in Figure 4-41, “Show Commissioning History
icon” (p. 4-60).
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-59
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commissioning History wizard
....................................................................................................................................................................................................................................
Figure 4-41 Show Commissioning History icon
...................................................................................................................................................................................................
3 Review the Commissioning History Wizard Overview in the resulting window as seen in
Figure 4-42, “Commissioning History Wizard: Overview window” (p. 4-60). Click Next>
when ready to proceed.
....................................................................................................................................................................................................................................
4-60 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commissioning History wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
4 The NE Selection window opens as shown in Figure 4-43, “NE Selection window for
Commissioning History” (p. 4-61). On the left-hand side of the screen, select the NE for
which the network and services configuration will be exported, then click the right arrow
> button to move it to the right-hand side of the screen. To select all of the NEs, use the
double arrow >> button. Verify the NEs to be included are listed in the right-hand side of
the window and click the Next> button.
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-61
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commissioning History wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 The Commissioning History Stages window opens and shows the progress of the
information retrieval as shown in Figure 4-44, “Commissioning History Stages window”
(p. 4-62).
....................................................................................................................................................................................................................................
4-62 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Commissioning Commissioning History wizard
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 Click the Finish button to view the commissioning history for the selected node(s). An
example is shown in Figure 4-45, “Commissioning history results” (p. 4-63). Note that
the Commissioning History is presented as an additional tab adjacent to the Optical
Nodes tab, if the Optical Nodes tab was previously open. A horizontal scroll bar allows
the screen to be moved left/right in order to view additional data.
...................................................................................................................................................................................................
7 To close the Commissioning History information tab, click the X in the corner of that tab.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1830 PSS Alcatel-Lucent – Proprietary 4-63
8DG-61259-AAAA-TBZZA Release 6.0 Use pursuant to applicable agreements
Issue 1 May 2013
Commissioning Commissioning History wizard
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-64 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013
Index
A about CPT Tool, 3-47 delete user, 3-43 power balancing, 4-26
add NE, 3-22 discover services, 3-26 Provision System wizard, 4-6
add user, 3-37 ............................................................. .............................................................
administration, 3-1, 3-18 E edit user, 3-40 R RADIUS server, 3-49, 3-50
ASON file transfer settings, 3-46 ............................................................. related documentation, xiv
............................................................. requirements
F features, 2-1
C change password, 3-44 functionality, 2-1 system, 3-2
Commission Greenfield System ............................................................. resynchronize NE, 3-36
wizard, 4-16
.............................................................
H help, 3-47
commissioning, 4-1
............................................................. S safety, xii, 1-1
background, 4-2
safety requirements
Commission Greenfield I Install the CPB Tool, 3-2
System wizard, 4-16 general, 1-6
installation, 3-2
history, 4-59 service demand export to EPT,
procedure, 3-2
3-30
Provision System wizard, 4-6 .............................................................
set ASON file transfer settings,
Commissioning History wizard, L Launch the CPB Tool, 3-14 3-46
4-59
............................................................. store EPT design file, 3-27
configure RADIUS authentication,
3-50 N NE loss report system loss report, 4-43
....................................................................................................................................................................................................................................
.............................................................
....................................................................................................................................................................................................................................
IN-2 Alcatel-Lucent – Proprietary 1830 PSS
Use pursuant to applicable agreements 8DG-61259-AAAA-TBZZA Release 6.0
Issue 1 May 2013