Professional Documents
Culture Documents
ASD/LRFD
Phần 1: TÍNH TOÁN THEO TRẠNG THÁI
GIỚI HẠN ULS
TÍNH TOÁN KIỂM TRA CẤU KIỆN
2
A- CẤU KIỆN CHỊU NÉN
Design of member for compression
Lực chịu nén tới hạn danh nghĩa ( Nominal compressive strength Pn)
3
A- CẤU KIỆN CHỊU NÉN
2. Các điều kiện kiểm tra ổn định tổng thể
4
a) Flexural Buckling without slenderness ( compact, non-compact
section)
5
a) Flexural Buckling without slenderness ( compact, non-compact
section)
6
A- CẤU KIỆN CHỊU NÉN
a) Flexural Buckling without slenderness ( compact, non-compact
section)
Compact
Section Develops its full plastic stress before buckling
(failure is due to yielding only)
Noncompact
Yield stress is reached in some but not all of its
compression elements before buckling takes place
(failure is due to partial buckling partial yielding)
Slender
Yield stress is never reached in any of the compression
elements (failure is due to local buckling only)
7
A- CẤU KIỆN CHỊU NÉN
a) Flexural Buckling without slenderness ( compact, non-compact
section)
8
A- CẤU KIỆN CHỊU NÉN
a) Flexural Buckling without slenderness ( compact, non-compact
section)
9
a) Flexural Buckling with slender elements
10
a) Torisonal or Flexural Torisonal Buckling without slender element
11
B- CẤU KIỆN CHỊU UỐN
Design of member for flexure
12
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
B.1) Compact Section
1. Yielding
13
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
Moment danh nghĩa (Nominal flexural strength Mn)
1. Yielding
14
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
1. Yielding
15
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
1. Yielding
16
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
Moment danh nghĩa (Nominal flexural strength Mn)
17
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
18
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
B.2) Compact WEB and Noncompact/Slender FLANGE
1. Lateral - Torsional Buckling (LTB)
2. Compression Flange Local Buckling (FLB)
19
B- CẤU KIỆN CHỊU UỐN
Design of member for compression
20
C- CẤU KIỆN CHỊU NÉN UỐN
Design of member for combined forces and torsion
21
Phần 2: TÍNH TOÁN THEO TRẠNG THÁI
GIỚI HẠN SLS
a) Chuyển vị đứng kèo thép:
22
Phần 2: TÍNH TOÁN THEO TRẠNG THÁI
GIỚI HẠN SLS
b) Chuyển vị ngang cột thép:
23
Phần 2: TÍNH TOÁN THEO TRẠNG THÁI
GIỚI HẠN SLS
c) Chuyển vị xà gồ:
24
CẢM ƠN CÁC BẠN
ĐÃ THEO DÕI