Professional Documents
Culture Documents
On-site tests
2. Product > S-2, at least 1 sample per size per style > Fail if client tolerance points
dimensions
> Measure and report dimension of 10% of total measured points
measurement
product. Cotecna’s tolerance table
> Use Cotecna’s tolerance if no
Material Size Tolerance
client tolerance given.
Knit, elastic Over 35 cm +2/-1 cm
> Pending if Cotecna’s
10-35 cm +/-1 cm
tolerance points > 10% of total
Under 10 cm +/-0.5 cm
measured points
Woven, Over 60 cm +2/-1 cm
Under 10 cm +/-0.5 cm
Location Tolerance
4. Product weight 3 samples, at least 1 sample per style. > No defects allowed
measurement Weigh the product and report actual data
weight shown on printed information. > Conforms to printed
information
1
Cotecna Trade Services | www.cotecna-inspection.com | October 2012
Item Method Criteria
5. Stuffing > 1 sample per style > No defects allowed
material check
> Cut open the cover and examine all > No foreign material other than
(for stuffed
products) material inside the stuffed product. claimed stuff material
7. Barcode > Check 3 samples but at least 1 sample > No defects allowed.
verification for each different barcode on gift boxes
/ retail packs / outer / export / master / > Must be scannable, and
shipping cartons have barcodes. barcodes are correct as
printed.
8. Carton > 1 sample per type of master (shipping / > No defects allowed
dimension and export) carton
weight > Conforms to printed
measurement > Measure external dimensions and weigh information.
the carton and then report actual data.
> Report actual findings if no
> Measure internal dimensions if client range or tolerance.
requests this.
2
Cotecna Trade Services | www.cotecna-inspection.com | October 2012