Professional Documents
Culture Documents
Activity 3:
c. sides and bottom of groove of the pulley d. anywhere in the groove of the pulley
Activity 4:
A V-belt drive consists of three V-belts in parallel on grooved pulleys of the same size. The angle of
groove is 30° and the coefficient of friction 0.12. The cross-sectional area of each belt is 800 mm2 and
the permissible safe stress in the material is 3 MPa. Calculate the power that can be transmitted
between two pulleys 400 mm in diameter rotating at 960 rpm.
Given: Ac = 800 𝑚𝑚2 𝜎 = 3Mpa D = 400 mm N = 960 rpm Angle = 30 degrees µ = 0.12
Solution:
𝜋𝐷𝑁 𝜋(400)(960)
𝑉= = = 20106.193 𝑚𝑚/ sec 𝑜𝑟 20.10 𝑚/𝑠𝑒𝑐
60 60
𝑇1 30°
2.3 log ( ) = 0.12 ∙ 𝜋 ∙ cos
𝑇2 2
𝑇 1.456 𝑇1
2.3 log ( 1 ) = = 0.633, = 4.3; 𝑇1 = 2400 𝑁 𝑡ℎ𝑢𝑠, 𝑇2 = 558.13 𝑁
𝑇2 2.3 𝑇2
𝑃 = (𝑇1 − 𝑇2 ) 𝑉 = ( 2400 𝑁 − 558.13 𝑁) ∙ 20.10 𝑚/𝑠𝑒𝑐 = 37021.58 W
a. Crossed flat belt drive b. Rope drive c. V-belt drive *d. Chain drive
2. In order to have smooth operation, the minimum number of teeth on the smaller sprocket, for
moderate speeds, should be
a. 15 *b. 17 c. 21 d. 25