Professional Documents
Culture Documents
Inaba-Denko 201103 Catalog PDF
Inaba-Denko 201103 Catalog PDF
NH/PC/NC/SPH
Highest
Highest Quality
Quality &
& Performance
Performance Guaranteed
Guaranteed !!!!
Relevant Safety
Standards
Superior Quality Control
INABA DENKO insulated copper tube and pipe conforms to
most current safety and performance standards for copper
pipe and insulation.
Copper Tube : Japanese Standard(JIS H3300 C1220T)
European Standard(EN12735-1)
Insulation : Japanese Standard(JIS A9511 A-PE-C-2)
European Standard(EN13501-1)
French Standard(M1)
Italian Standard(CL-1)
British Standard(BS476 Part 6 CLASS 0)
( )
Copper tube diameter 15.88mm Insulation
1 *1 Excludes RB series. 2
Insulated Copper Tube / Pipe
JIS standard M1 standard(FR)
Water Absorption Volume 2.0 g/100 c㎡ or less Water Absorption Volume 2.0 g/100 c㎡ or less
Moisture Permeability(per 25mm thickness) 20 ng/㎡・s・Pa or less Moisture Permeability(per 25mm thickness) 20 ng/㎡・s・Pa or less
ER standard BS standard(UK)
Chemically cross linked polyethylene foam with an expansion factor of 30 Tensile Strength 26.6 N/c㎡ or over
enclosed by a plastic film with an embossed surface. Water Absorption Volume 0.01 g/100 c㎡ or less
Thickness Shrinkage Ratio 7 % or less
Item Value
Hardness 14.0 or over
Thermal Conductivity(Ave. 23℃) 0.043 W/m・K or less
Temperature Range −40∼105℃
Tensile Strength 14 N/c㎡ or over
Flame Retardant BS476 Part 6 CLASS 0
Water Absorption Volume 2.0 g/100 c㎡ or less
Thickness Shrinkage Ratio 7 % or less
Moisture Permeability(per 25mm thickness) 20 ng/㎡・s・Pa or less
Temperature Range −40∼120℃
Flame Retardant CLASS : DL-S2,d0(EN-13501-1)
3 4
Insulated Copper Tube / Pipe
D
ç 70694 NC-420-15H 2 1/2×0.8 15 44 20 1
d
ç 70695 NC-520-15H 2 5/8×1.0 15 47 20 1 4,000
4,000
Unit:mm
D
d
Insulation
Code No. Item No. Class (O.D. × t) (with cap) Pcs/Pkg
1/4×0.8 3/8×0.8 1/4×3/8 1/4 3/8 4,000
4,000
ç 66170 SPH-233-C 3m 3m 3m 2 pcs 2 pcs 10
ç 66180 SPH-233.5-C 3.5 3.5 3.5 2 2 10 Unit:mm
ç 66190 SPH-234-C 2 4 4 4 2 2 10
Copper tube Insulation
ç 66200 SPH-235-C 5 5 5 2 2 10 Code No. Item No. Class
Temper
O.D. Thickness O.D. Pcs/Pkg
ç 66210 SPH-237-C 7 7 7 2 2 10 grade Thickness
D t d
ç 65440 NH- 340N-KHE 3/8 0.8 1/2H 51 20 20
3
ç 70560 NH-1040A-KHE 1 1/4 1.7 1/2H 73 20 4
4,000
4,000 ç 70561 NH-1140A-KHE Special Order Only ! 1 3/8 1.85 1/2H 76 20 4
ç 70562 NH-1240A-KHE 1 1/2 2.00 1/2H 80 20 4
Unit:mm
ç 70583 NH-1340A-KHE Special Order Only ! 1 5/8 2.15 1/2H 84 20 2
Copper tube Insulation ç 70584 NH-1440A-KHE Special Order Only ! 1 3/4 2.3 1/2H 86 20 2
Class Temper
Code No. Item No. O.D. Thickness O.D. Pcs/Pkg ç 70586 NH-1640A-KHE Special Order Only ! 2 2.65 H 93 20 2
grade Thickness
D t d ç 70587 NH-1740A-KHE Special Order Only ! 2 1/8 2.8 H 96 20 2
ç 65300 NH- 340N 3 3/8 0.8 1/2H 27 8 28
ç 65310 NH- 440N 3 1/2 0.8 1/2H 34 10 20
■ Insulation Specifications ■ Refrigerant Classification List
ç 65320 NH- 540N 3 5/8 1.0 1/2H 37 10 16
ç 65330 NH- 640N 3 3/4 1.0 1/2H 41 10 12 Chemically cross linked polyethylene foam with an expansion
factor of 30 enclosed by a plastic film with an embossed surface. Max.
ç 66886 NH-640N-1.05T Special Order Only ! 3 3/4 1.05 1/2H 41 10 12 Class Usable Applicable Refrigerant
ç 65340 NH- 740N 3 7/8 1.0 1/2H 44 10 10 Pressure
Item Unit Value
ç 65350 NH- 840N 3 1 1.0 1/2H 47 10 8
ç 65360 NH- 940N 2 1 1/8 1.0 1/2H 50 10 6 Thermal Conductivity R22, R407C,
W/m・K 0.043 or less 1 3.45 MPa
ç 65370 NH-1040N 2 1 1/4 1.1 1/2H 53 10 6 (Ave. 23℃) R404A, R507A, etc
ç 65380 NH-1140N 1 1 3/8 1.1 1/2H 57 10 4 Tensile Strength N/㎝ 2 14 or over
ç 70602 NH-1240Z 2 1 1/2 1.35 1/2H 60 10 4 Water Absorption Volume g/100㎝ 2 2.0 or less R22, R410A,
2 4.30 MPa
ç 66760 NH-1340E Special Order Only ! 1 1 5/8 1.2 1/2H 64 10 4 Thickness Shrinkage Ratio % 7 or less R407C, R404A, R507A, etc
ç 66770 NH-1440E Special Order Only ! 1 1 3/4 1.25 1/2H 66 10 4 Moisture Permeability
ng/m ・s・Pa
2
20 or less
ç 66780 NH-1640E Special Order Only ! 1 2 1.4 H 83 15 2 (per 25mm thickness) 3 4.80 MPa 4.80MPa or less
ç 66790 NH-1740E Special Order Only ! 1 2 1/8 1.5 H 86 15 2 Temperature Range ℃ −40∼12
※ Also available in a self extinguishing flame retardant type(NHR Series)
.
5 6
Stress Relieving Bracket / Clamp・Copper Fitting
For PIPELOCK TK For PIPELOCK TK For PIPELOCK TK
TK PIPELOCK (Pipe Support Ferrule + Fixing Clamp) Stress Relieving Bracket/Clamp system
for vertical riser pipes in A/C systems
For reduced clearance from wall
surface.
Specification Dimensions
Dimensions
● Material
Pipe Support Ferrule Fixing Clamp Pipe Support Ferrule : Body … C1220
Hook … SUS301-CSP
10.5
15.2
22.5
Fixing Clamp : SPHC 5 17 5 17 30.4 t3.2
(Powder coated)
25
Dimensions Dimensions
7
TK-3K TK-U00Z
63.2
30.4 t
30.4 3.2
C Attached Screw
Body ● ⊕Hex bolt M6×20L … 2 pcs.(Unichrome)
φ7 46.6
L
10.5
Hex nut M6 … 2 pcs.(Unichrome) 2-φ10.5
L
15
E
B
TK-U00 Unit:mm
20.5
50
50
73
Hook
7
D 22 10
15
4 17 17 4 17 17 15.2
5 15.2
Unit:mm Unit:mm 5 Unit:mm
Vertical Mounting Bracket
for Structural Steel(TK-U) ■ Indoor Use Type
Code No. Item No. Compliant pipe size A B,E C D F Pcs/Pkg PIPELOCK TK
Code No. Item No. L t Pcs/Pkg Code No. Item No. L Pcs/Pkg
ç 51763 TK- 3K ※ φ 9.52 9.60 63.4 31.4 1.0
ç 51840 TK-K 60 60 ç 51820 TK-B 60 60
ç 51764 TK- 4K φ12.70 12.81 64.8 32.8
ç 51841 TK-K 70 70 ç 51821 TK-B 70 70
ç 51765 TK- 5K φ15.88 16.00 66.4 34.4
ç 51842 TK-K 80 80 3.2 100 ç 51822 TK-B 80 80 100
ç 51766 TK- 6K φ19.05 19.19 68.0 36.0
35 ç 51843 TK-K 90 90 ç 51823 TK-B 90 90
ç 51767 TK- 7K φ22.22 22.36 69.6 37.6 1.6
ç 51844 TK-K100 100 ç 51824 TK-B100 100
ç 51768 TK- 8K φ25.40 25.56 71.4 39.4 UNIVERSAL BAND HBR
Specification ● Material … SPHC(Unichrome) Specification ● Material … SPHC(Unichrome)
ç 51769 TK- 9K φ28.58 28.75 73.0 41.0
20 ■ Outdoor Use Type ■ Hot-Dip Galvanized Type
ç 51770 TK-10K φ31.75 31.93 74.6 42.6 Code No. Item No. Pcs/Pkg
Code No. Item No. L t Pcs/Pkg Code No. Item No. L Pcs/Pkg
ç 51771 TK-11K φ34.92 35.11 76.5 44.5 ç 51860 TK-U00 100
ç 51850 TK-K 60-SUS 60 ç 51826 TK-B 60Z 60
ç 51772 TK-12K φ38.10 38.31 78.1 46.1 Specification ● Material … SPHC(Unichrome) ç 51851 TK-K 70-SUS 70 ç 51827 TK-B 70Z 70
ç 51773 TK-13K φ41.28 41.50 79.6 47.6
50 2.0 ■ Hot-Dip Galvanized Type ç 51852 TK-K 80-SUS 80 3.0 100 ç 51828 TK-B 80Z 80 100
ç 51774 TK-14K φ44.45 44.68 81.2 49.2
Code No. Item No. Pcs/Pkg ç 51853 TK-K 90-SUS 90 ç 51829 TK-B 90Z 90
ç 51776 TK-16K φ50.80 51.03 84.4 52.4
ç 51861 TK-U00Z 100 ç 51854 TK-K100-SUS 100 ç 51830 TK-B100Z 100
ç 51777 TK-17K φ53.98 54.22 86.0 54.0
※TK-3K is different from other sizes on the shape and the installation method. Contact INABA for details. Specification ● Material … SPHC Specification ● Material … SUS304 Specification ● Material … SPHC
(Hot-dip galvanized equivalent to HDZ35) (Hot-dip galvanized equivalent to HDZ35)
Thermal expansion
Support Support Support Support
Features
Reduces gravity loading on vertical riser Can be applied after installation of pipe system
Unlike a conventionally supported vertical riser installation, PIPELOCK is brazed to Because the pipe support ferrule is
the vertical copper riser and reduces the loading created by the weight of the pipe split, PIPELOCK can easily be fitted
system. onto the riser and adjusted after the
Caution Do not use on vertical risers over 50 meters and ensure that the PIPELOCK pipe system has been installed.
ferrule is brazed on during installation.
Reduces extra stress on vertical riser due to thermal expansion by 50% Temporary fixing
In conventional installations, the lowest elbow of the pipe system carries the full Tab on pipe support allows temporary fixing to facilitate brazing without
load of the pipe itself plus the extra stresses imposed by thermal expansion.
Installing PIPELOCK in the center of the vertical riser reduces the load created by
slippage.
High Quality JIS approved COPPER FITTINGS
Easily adjustable
the system components as well as the thermal expansion by 50%.
Slotted holes on wall bracket allow for precise adjustments.
satisfy all the requirements for hot and cold
water as well as refrigerant gas.
※ A wide range of copper fittings up to 66.68mm diameter is
7 available from INABA DENKO. 8
Hanger Support Sealant Putty・Flare Nuts・Flare Couplers
SRV BT BHC
Threaded Rod Fitting Type
SUPERLOCK V TYPE 〈Integrated Body and Clip〉 Single Suspension BIGTIE Self Locking
Plastic Pipe Tie BIGTIE MOUNTING CLIP Mounting base for
BIGTIE system
One-Touch Fitting Dimensions t1=Body thickness Compliant size Dimension(mm) Dimensions L BHC-1・2 BHC-3 Dimensions L
t2=Clip thickness Allowable A
L1 Code No. Item No. Insulation Body Clip Pcs/Pkg
15.5
A
Copper pipe size static load L1 L2 H A B thickness thickness
thickness (t1)(t2)
C
30
B
D
20
26
L 2
ç 56220 SRV-24N 10×10 6.35× 9.52∼ 6.35×12.70 73 58 82 57 34 100
ç 56230 SRV-35N 10×10 6.35×15.88∼ 9.52×15.88 76 61 88 63 37 1.2 100 φ4.5 Unit : mm
H
t
ç 56240 SRV-46N 10×10 9.52×19.05∼12.70×19.05 80 65 99 74 41 100 Code No. Item No. L A B C D E Pcs/Pkg
Unit : mm
B ç 56250 SRV-58N 10×10 12.70×22.22∼15.88×25.40 86 71 101 83 47 100 ç 60300 BHC-1 64 52.5 32.5 44 23.2 16.5 100
H
10×10 19.05×25.40∼19.05×28.58 Code No. Item No. Biding diameter Copper pipe applicable guide L A H t Pcs/Pkg
ç 60310 BHC-2 78 66.5 32.5 44 23.2 16.5 100
ç 56260 SRV-69N 89 74 115 90 50 100
A
10×20 6.35×9.52 ç 60050 BT-200 φ20∼φ 50 6.35× 9.52(Insulation thickness 8mm) 200 50 10 2.5 40pac ç 60320 BHC-3 91 60 32.5 44 30.8 24.1 100
Unit:mm
10×10 22.22×28.58∼22.22×31.75 196N 1.0 ç 60060 BT-250 φ30∼φ 66 9.52×15.88(Insulation thickness 8×10mm) 250 80 10 ● Attaches BIGTIE onto lineset Caution
2.5 40pac Purpose
Purpose ● Supports pipe by attaching to a W3/8”threaded rod. ç 56270 SRV-710N 100 85 119 95 61 50
BT-300 duct or any flat surface ● BIGTIE is not a load bearing
Features ● SUPERLOCK Clamp quickly snaps onto threaded rod. 10×20 6.35×12.70∼12.70×19.05 (20kgf) ç 60070 φ33∼φ 82 12.70×28.58(Insulation thickness 10mm) 300 90 10 2.5 20pac
including RD GIRDER(RDK) .
● Hinge mechanism permits temporary installation. system, it is designed for use
● Easy height adjustment by rotating clamp on 10×10 25.40×31.75∼25.40×34.92 1.6 ç 60080 BT-350 φ40∼φ 98 19.05×38.10(Insulation thickness 10mm) 350 100 10 2.5 20pac only as a light duty means of
Features ● Apply to channel, and inside
threaded rod. ç 56280 SRV-811N 100 87 123 98 63 50 retaining the lineset and/or drain
10×20 15.88×19.05 ç 60090 BT-400 φ48∼φ114 19.05×38.10(Insulation thickness 10×20mm)400 150 11.6 3.3 20pac RD series duct.
Specification ● Material … Steel with SPCC(Unichrome)plating hose assemblies.
ç 60100 BT-450 φ54∼φ130 22.22×44.45(Insulation thickness 10×20mm)450 170 11.6 3.3 20pac ● Permits BIGTIE to be direct
Caution ● For indoor use only. Use only with W3/8”threaded 10×10 28.58×34.92∼28.58×38.10 mounted onto any flat surface. ● DO NOT USE BIGTIE AS A
rod. ç 56290 SRV-912N 100 87 129 104 63 50
10×20 19.05×19.05 Specification ● Material…PE ※ 20 pcs./pack BRACKET TO HANG OR
■ Installation Specification ● Material … PP and ABS
① ② ③
Temperature range(Surface temperature)… −20∼60℃ SUPPORT ANY VERTICAL OR
procedure
10×10 31.75×38.10∼34.92×44.45 Caution ● Binding diameter is reduced when BIGTIE is used with BHC mounting ■ Effective binding diameter HORIZONTAL PIPE SYSTEM.
ç 56300 SRV-1114N 118 106 143 118 80 50
10×20 19.05×38.10 clip. BHC
BT
BT-200 BT-250 BT-300 BT-350 BT-400 BT-450
● BIGTIE is not a load bearing system, it is designed for use only as a
BHC-1 − φ25∼45 φ25∼65 φ25∼85 φ40∼95 φ40∼115
light duty means of retaining the lineset and/or drain hose assemblies.
SRE
BHC-2
SUPERLOCK E TYPE 〈Hanger〉
− φ25∼35 φ25∼55 φ25∼75 φ35∼90 φ35∼110
● DO NOT USE BIGTIE AS A BRACKET TO HANG OR SUPPORT ANY
VERTICAL OR HORIZONTAL PIPE SYSTEM. BHC-3 − − − φ30∼65 φ30∼80 φ30∼100
FN FUN
Dimensions t=1.6 Allowable
Code No. Item No. Pcs/Pkg
Insulation thickness Max Copper pipe size static load H A B FLARE NUT FLARE COUPLER with Flare Nut
36.7
UN
● For indoor use only. Use only with W3/8”bolt. ● Easy adjustment by rotating on threaded rod or bolt.
FLARE COUPLER
Caution
● Release lever on clip permits easy snap opening and closing. Caution ● Nuts must be tightened with a torque wrench strictly to
SRS
Threaded Rod Fitting Type torque specifications listed in the table below.
SUPERLOCK S TYPE 〈Integrated Body and Clip〉 Single Suspension Code No. Item No. Applicable copper tube size Pcs/Pkg(pcs×bag) Overtightening will cause stress corrosion cracks on the
ç 10102 UN-2B 6.35(1/4) 50(5×10) flare nut and undertightening will lead to refrigerant
t1=Body thickness Compliant pipe size Dimension(mm) leakage.
One-Touch Fitting Dimensions
t2=Clip thickness ç 10103 UN-3B 9.52(3/8) 50(5×10)
Allowable
L1 Code No. Item No. NEODRAIN VP Insulated copper pipe Body Clip Pcs/Pkg ç 10104 UN-4B 12.70(1/2) 50(5×10)
PMQ static load L1 L2 H A thickness thickness Standard Torque Specifications for Flare Nuts :
PIPE pipe 10mm 20mm (t1)(t2) ç 10105 UN-5B 15.88(5/8) 50(5×10)
30
A
A
AP EP
(20kgf) 2 component
The shape of SRS-25 and 65 is different. Unit:mm
ç 55940 SRS-45 − − 31.75 12.70 PMQ-25 89 77 87 52 50 SEALANT PUTTY for A/C PLASEAL epoxy putty
Purpose ● Supports pipe by attaching to bottom ç 55920 SRS-50 NDD-40N 50 38.10 22.22 PMQ-30 97 85 91 60 50
of a W3/8”threaded rod. 1.6
ç 55950 SRS-65 NDD-504N − 50.80 38.10 PMQ-50 118 106 125 80 50 Features Features ● Hardens in 1.5 hours @ 20℃.
Features ● SUPERLOCK Clamp quickly snaps onto ● Can be used underwater.
threaded rod Specification ● Material … Steel with SPCC Caution ● For indoor use only. Use only with ● All weather, fire retardant non
● Hinge mechanism permits temporary installation. (Unichrome)plating W3/8”bolt. drying putty with superior Caution ● Do not use in temperatures over
● Easy height adjustment by rotating on threaded adhesion. 110℃.
rod. ● Temperature range : −20∼50℃ ● Do not use in the presence of
ethyl alcohol, chloride bleach,
PL
● Working temperature : 5∼40℃
PIPEHOOK
Refrigerant pipe support for use chlorine gas or nitric acid.
only with W3/8”threaded rod ※Putty will harden below 5℃, ● Always use protective gloves
always heat before use at when working with this product.
■ Compliant copper pipe Specification ● Material… PP this temperature.
One-touch Dimensions
Item No. Compliant copper pipe ■ Compliant threaded rod ・ ・・ W3/8
Easy adjustment
by temporary stop release lever
easy lock ■ Allowable static load & temperature range
① Mix components thoroughly until ② Do not use until mixture is
PL-24V
6.35(8mm)
× 9.52( 8mm) color of mixture changes to gray. uniformly gray.
6.35(8mm)
×12.70(10mm) Allowable static load Temperature range
PL-35V ×15.88(10mm)
9.52(8mm) 74.5N(7.6kgf) 0℃∼60℃
Caution ● Oil in putty may stain paint or wallpaper if in direct contact.
A
Light & tough Unit:mm ç 60190 PL-35V 124 100 103 34 ç 0602 AP-1000
Gray・Ivory・White
1000g 20 ç 40510 EP-178 500g(250g×2) 24
9 10
Lineset Ducting System
SLIMDUCT IS THE WORLDWIDE PIONEER
OF LINESET TRUNKING FOR A/C SYSTEMS.
THE ORIGINAL SLIMDUCT SD PVC TRUNKING SYSTEM
HAS ALWAYS BEEN THE MARKET LEADER IN QUALITY,
DESIGN, FUNCTION AND VERSATILITY.
A Perfect Blend of Style Form and
Function in a High Grade Finish
Professional Protective
The SLIMDUCT combination of duct SLIMDUCT is fabricated from a special high grade PVC for
and fittings is suitable for any split A/C superior UV and weather resistance to ensure long term protection
system and will conceal, beautify and for the linesets from the elements, vandalism and pest damage.
protect any exposed linesets perfectly.
SLIMDUCT SD Taped Lineset Installation
Almost no changes in SLIMDUCT Over the long term, tape will deteriorate
exposing lineset, damaging appearance and
reducing efficiency of the A/C system.
Excellent Performance
Variety
A Wide Range of Components in 3. Clip on duct cover and secure fitting covers with
5 colors provide a wide range to suit any color scheme.3 SLIMDUCT includes a scored line along both sides Base
DRAIN HOSE
3 Paintable to match or compliment custom colors. Follow paint manufacturers recommendations for vinyl products. of base which permits
easy notching to
create an exit slot for SLIMDUCT Accelarated Weather Resistance Test
drain hose at any Accelerated weather resistance test was carried out on test pieces
Purpose of polyvinyl choloride used for SLIMDUCT SD and the change of
point. mechanical characteristics was checked with testing time.
The accelerated weather resistance test was carried out for 2,000
100mm Interval Slotted Knockouts Test Items
hours and following characteristics of test pieces were measured at
every 200 hours.
White Ivory Gray Brown Black Practiced
Slotted knockouts are provided 1)Tensile Strength
2)Bending Maximum Strength
at 100mm intervals on the base
1)For Tensile Strength : According to JIS K-6745
Size Fittings of each 2m length of SLIMDUCT Test Pieces
2)For Bending Maximum Strength : According to JIS K-7203
to facilitate attachment to the 1)Accelerated Weather Resistance Tesiting Device.
4 sizes to accommodate any single lineset or A full range of 26 fittings customizes SLIMDUCT wall. Testing
Sunstrine Carbon Weather Meter
multiple linesets. SD / NSD to suit the layout of any lineset system. Device
Condition of Irradiation : According to JIS D-0205
2)Strength Testing Instrument : Universal Tester
Flame Retardant
Bending Strength
Tensile Strrength
3223 7846
(400) (800)
SLIMDUCT SD & NSD1 conform
to the requirements of Bending Strength
SD-140 SD-100
SD-77 UL-94-V-02. 3432 6865
SD-66 (350) (700)
1,000 1,000 2,000
1 Excludes some items. Irradiation Time
hours
11 12
SLIMDUCT SD
Vertical
Dual Airhandler System
WALL INLET
(SW)
REDUCER
TEE
(ST) (SDR)
WALL INLET
(SW) REAR ENTRY
SLIMDUCT COUPLER
(SD/NSD) (SJA)
Installation with
Different Wall Thicknesses
WALL INLET
(SW)
Basic Installation ‒ 1
Airhandler SD SLIMDUCT SD Ducting
Dimensions
SLIMDUCT WALL INLET
B 2000
(SD/NSD) (SW) E
90°FLAT ELL
(SK)
FLEXIBLE ELL
D
(SF) SLIMDUCT
C
A
(SD/NSD)
SADDLE
(SFS)
COUPLER
(SJ) Unit:mm
FLEXIBLE ADAPTOR
(SFJ) Code No. Item No. A B C D E Pcs/Pkg
ç 0401 SD- 66 60 58 46.5 64 51 15
ç 0402 SD- 77 75 63 60 76 56 15
ç 0403 SD-100 100 70 86 99 64 10
END FITTING END FITTING ç 0404 SD-140 140 80 122 135 73 5
(SE/SEN) (SE/SEN) SD-200 200 150 − − − −
● SD-200 : Under development(Design & shape are different from SD series. Dimension A&B is reference.)
Dimensions
B 2000
E
C
A
D
Unit:mm
SW WALL INLET SWA WALL INLET for Aftermarket Add-ons SK 90°FLAT ELL SKM 90°MINI FLAT ELL
Dimensions Dimensions Dimensions Dimensions
C E
B C
110 77
B 10
φ4
A
φ4
C
205
C
Duct position
D
A to be installed
Unit : mm
Unit : mm
65
Code No. Item No. A B C D ※
Pcs/Pkg
Code No. Item No. A B C D E Pcs/Pkg※ Unit : mm
ç 0421 SK- 66 68 62 100 20 60(20)
ç 0411 SW- 66 68 62 90 195 77 60(20)
Unit : mm ç 0422 SK- 77 83 66 128 20 60(20) Code No. Item No. A B C Pcs/Pkg
ç 0412 SW- 77 83 66 110 205 77 60(20)
ç 0423 SK-100 109 74 151 20 10(10) ç 7301 SKM- 66 67 62 82 20
ç 0413 SW-100 110 74 128 223 86 10(10) Code No. Item No. Pcs/Pkg
ç 0424 SK-140 146 84 190 30 5( 5) ç 7302 SKM- 77 82 68 97 20
ç 0414 SW-140 146 84 166 280 98 5( 5) ç 0429 SWA-77 20
※
( )shows quantities of Gray, White, Black, and Brown.
※
( )shows quantities of Gray, White, Black, and Brown. ※ It is not guaranteed to fit in this item with every existing pipe installation.
Check the job site before use.
SWM WALL INLET for A/C Cap SWK WALL INLET for A/C with Ventilation SC 90°VERTICAL ELL SCM 90°MINI VERTICAL ELL
Dimensions Dimensions
Dimensions Dimensions
A
B C A D
C
A C
B
B
C
A
C
E
D
Unit : mm
45°
28
φ4
B
B
t cap
exhaus
rotary
360 ° Slide prevention
pin
65
Unit : mm Unit : mm
Unit : mm SLIMDUCT SD
Code No. Item No. A B C Pcs/Pkg Code No. Item No. A B C Pcs/Pkg
Every wall inlet type is provided with a protruding pin on
A/C Cap Size the inside surface of the cover which can be aligned with ç 7311 SKF- 66 67 62 60 20 ç 7331 SCF- 66 67 62 58 20
Code No. Item No. A B Pcs/Pkg
Flange O.D. Flange Height a hole in the cover of SLIMDUCT SD to prevent the duct ç 7312 SKF- 77 82 68 65 20 ç 7332 SCF- 77 82 68 61 20
ç 0410 SWX-77 146.5 200 ∼φ130 ∼10 10 cover from sliding down when it is mounted vertically. ç 7313 SKF-100 107 75 75 10 ç 7333 SCF-100 107 75 64 10
ç 0415 SWX-77L 161.0 208 ∼φ153 ∼10 10 * Except the size 140 ç 7314 SKF-140 147 85 92 5 ç 7334 SCF-140 147 85 67 5
● Color … Ivory, Brown, Black, Gray ● Material … PVC + ABS(at lattice)
15 16
SLIMDUCT SD
A
138 A
81 41
SN-77B SN-77A
B
B
138
48
50
41
C 82
23
23
180
81
SN-77B SN-77A
Unit:mm
Unit:mm ※
Unit:mm
Code No. Item No. A B C Pcs/Pkg
Code No. Item No. Pcs/Pkg ç 0441 SJ- 66 71 62 50 60(20) Code No. Item No. A B Pcs/Pkg
ç 0517 SN-77 5 ç 0442 SJ- 77 85 67 50 60(20) ç 0416 SIF- 66 68 64 10
※Color … Ivory, Gray, Brown, Black ç 0443 SJ-100 109 75 66 20(20) ç 0417 SIF- 77 83 69 10
ç 0444 SJ-140 146 84 90 10(10) ç 0418 SIF-100 108 74 10
ST
※
( )shows quantities of Gray, White, Black, and Brown.
TEE
Dimensions SJA REAR ENTRY COUPLER
■ Typical Installation ■ Caulking locations
ENTRY
COUPLER
(SJA)
A
Caulking
Duct
E
E
Each ST pack includes these reducers: 2-φ4
Unit:mm
A
ST-77-66 (for SD-66) ×2
Caulking
Code No. Item No. A B C D E Pcs/Pkg
ST-100-66 (for SD-66) ×2
ç 0462 ST- 77 85 68 165 124 31 10 D
Unit:mm
ST-100-77 (for SD-77) ×2
ç 0461 ST-100 109 78 200 154 33 10
ç 0463 ST-140 148 87 250 199 32 5 ST-140-100 (for SD-100)×2 Code No. Item No. A B C D E Compliant pipe size Pcs/Pkg
ç 0445 SJA-100 109 75 148 70 88 PC-2320×PC-2320 20
SDR REDUCER SDI REDUCER ADAPTOR for Wall Inlet SE END FITTING SEN END FITTING
Dimensions Dimensions Dimensions Dimensions
B
A C Cut line
C D A
75 40
E
30
E
61
B
B D 53
A
Unit:mm
Unit:mm
Code No. Item No. A B C Pcs/Pkg ※
Unit:mm Unit:mm
Code No. Item No. A B C D E Pcs/Pkg ç 0486 SEN- 66 25 70 63 60(20)
ç 0477 SDR100- 77 66 75 82 107 66 20 Code No. Item No. Pcs/Pkg Code No. Item No. A B C D E Pcs/Pkg ※ ç 0488 SEN-100 56 112 76 20
ç 0478 SDR140-100 75 84 109 147 100 10 ç 0447 SDI-77-66 20 ç 0449 SE-77 53 43 45 82 67 60(20) ç 0489 SEN-140 77 150 85 10
※
( )shows quantities of Gray, White, Black, and Brown. ※
( )shows quantities of Gray, White, Black, and Brown.
17 18
SLIMDUCT SD
SWC WALL FLANGE SP SOFFIT INLET SFS SADDLE for FLEXIBLE ELL SF SFJ SF FLEXIBLE ADAPTOR
Dimensions Dimensions
C 7
40
D
B 10 6 G
E
B
C
A
F
A 20
70
Dimensions Dimensions
φ4
t
30
φE
B
Unit:mm Unit:mm
C A
Code No. Item No. A B C D E F G Diameter of core drill Pcs/Pkg Code No. Item No. A B C D E Pcs/Pkg A C
Unit:mm
ç 0481 SWC- 66 68 66 110 108 64 92 72 70 100 ç 7341 SP- 66 66 62 95 125 95 20 Unit:mm
ç 0482 SWC- 77 83 71 127 115 80 110 90 85 100 ç 7342 SP- 77 81 67 110 130 100 20 Code No. Item No. A B C E t Pcs/Pkg
ç 0483 SWC-100 108 78 174 144 104 140 114 110 50 ç 7343 SP-100 106 74 135 137 107 10 ç 0611 SFS- 66 60 58 18 4 1 60 Code No. Item No. A B C Pcs/Pkg
ç 0484 SWC-140 148 88 220 180 144 196 154 145 20 ç 7344 SP-140 146 84 175 147 117 5 ç 0612 SFS- 77 75 63 18 4 1 60 ç 0436 SFJ- 66 68 62.1 35 20
● Material … ABS ● Material … ABS ç 0613 SFS-100 100 70 22 7 1.5 40 ç 0437 SFJ- 77 83 66.1 35 20
ç 0614 SFS-140 146 85 22 7 1.5 40 ç 0438 SFJ-100 108 74.1 40 20
● Material … SUS304 ※ Use in combination with SFS.
※ For secure joint, insert 2 corrugations of SF into SFJ adaptor.
A L1
L2
T(min)
SL band
Max 45°
(PE)
B
SL saddle
Direct connection to
(POM)
SLIMDUCT SD Unit:mm
Dimensions 12 22 φ4
Code No. Item No. A B L1 L2 T(min) Pcs/Pkg 300
DO NOT Code No. Item No. Pcs/Pkg
ç 0451 SF- 66- 500 62 58 495 74 0.3 20
15
6.5 17
BEND OVER PARAPET ç 04720 SL-300 500
ç 0452 SF- 66-1000 62 58 1033 74 0.3 20
9
●Material … PE (SL band) , POM(SL saddle) 31
ç SF- 66-2000 62 58 2000 − 0.3 ※ Do not overtighten strap! This may decrease insulation performance. Unit:mm
ç 0453 SF- 77- 500 74 62 495 72 0.3 20
ç 0454 SF- 77-1000 74 62 1033 72 0.3 20 ■ Specification ■ The table below shows the maximum size lineset
ç SF- 77-2000 74 62 2000 − 0.3 Temperature Range −20℃∼60℃ combinations that can be contained in SLIMDUCT SD:
ç 0455 SF-100- 800 100 70 800 70 0.4 10 Application Wall Mounted Insulation
Thickness
10×10㎜ 10×20㎜ 20×20㎜
ç 0456 SF-140- 800 146 86 800 80 0.3 5
Horizontal Application Material Rigid Polyvinyl Chloride ※ Exclude some items
φ6.35×φ9.52
● Material … PE+EVA
(66 / 77) SD- 66
PP(100 / 140)
SD- 77 φ9.52×φ15.88
Ivory
(φ19.05×φ22.22)
or
SF
Gray
2M FLEXIBLE ELL with Raw Ends Max 90°
Color
Brown
SD-100 (φ6.35×φ9.52)
×2 sets
φ9.52×φ19.05
White
(φ6.35×φ12.70 and
Dimensions Black SD-140 φ9.52×φ15.88) φ19.05×φ31.75 φ19.05×φ31.75
× 2 sets
2000 A
※ Excludes some items. ※ 10mm type of insulation thickness for φ6.35mm and φ9.52mm is 8mm.
・Most components are PVC, when other materials are used they Piping system includes DRAIN HOSE(DH-16) .
DO NOT will be listed under the component description.
B
19 20
Premium Model Aluminum & ABS Duct* SLIMDUCT ASD
*Aluminum=Duct / ABS=Fittings
Dimensions Dimensions
C E
B 2000
E
D
A luxury SLIMDUCTTM
C
A
A
model catering to AL
B
Unit:mm ABS Unit:mm
Code No. Item No. A B C D E Pcs/Pkg Code No. Item No. A B C D E Pcs/Pkg
the high end of the market ç 05243 ASD-77 75 63 60 76 56 2 ç 05253 SW-77-A 83 66 110 205 77 4
Dimensions Dimensions
B C
B
A
φ4
A
Attractive High Gloss Finish Protective
C
ABS
E
D
D
SLIMDUCT ASD offers a new level of SLIMDUCT ASD is fabricated from high grade anodized C
enhanced appearance and sophistication Aluminum and the fittings are fabricated from a special Applicable A/C cap
Unit:mm ABS Unit:mm
while it protects and beautifies an exposed high grade ABS for superior UV and weather resistance AC-67,75,100/WC-60N,65N,75N
lineset on any split type A/C system. to ensure long term protection for the linesets from the Code No. Item No. A B C D E Pcs/Pkg Code No. Item No. A B C D Pcs/Pkg
elements, vandalism and pest damage. ç 05263 SWM-77-A 146.5 82 188 67 84 4 ç 05283 SK-77-A 83 66 128 20 4
Years later
SLIMDUCT ASD
Almost no changes in SLIMDUCT
Dimensions Dimensions
Years later
Taped Lineset Installation A D
Over the long term, tape will
deteriorate exposing lineset,
C
damaging appearance and B C G
reducing efficiency of the A/C
system. ABS
I
A
ABS Unit:mm
Easy & Quick Installation Extra Thermal Resistance
D
E
H
Code No. Item No. A B C D Pcs/Pkg
Simple 3 step installation : A combination of Aluminum duct and ABS fittings
gives the ASD product line superior thermal ç 05293 SC-77-A 81 67 100 20 4
1. Secure SLIMDUCT ASD & fitting bases
J
to wall. resistance over the conventional PVC SD series.
SL STRAP KIT
2. Install lineset
and drain hose.
PAIRCOIL
Tough
Tough! SE END FITTING
3. Clip on duct Unit:mm
Dimensions
cover and Cover Cut line
Code No. Item No. A B C D E F G H I J Pcs/Pkg C D
secure fitting
covers with
Base
ç 05273 SWK-77-A 205 116 127 20 77 104 82.5 40 158 67 4
DRAIN HOSE
screws.
B
SLIMDUCT Acknowledged and Welcomed Worldwide High Reliability and Excellent Track Record SJ COUPLER ABS
A
Unit:mm
INABA DENKO pioneered the concept of PVC SLIMDUCT ASD has been installed in many Dimensions
lineset ducting worldwide in the 1980's and have residential and commercial applications as well Code No. Item No. A B C D E Pcs/Pkg
been responsible for a number of major new as public buildings. ç 05343 SE-77-A 53 43 45 82 67 4
A
developments in this ■ The table below shows the maximum ■ Specification
area. Today we are the size lineset combinations that can Item Material (Surface treatment) Color
be contained in SLIMDUCT ASD :
B
world's largest Pattern Pipe Containable Reference SE-77-A Duct Aluminum Bronze
manufacturer of these C
φ6.35×φ9.52
(Anodized)
1 ◎
products and export DH-14 or DH-16 Fittings
ABS
(Acrylic urethane)
Bronze
the most extensive ABS Unit:mm φ6.35×φ12.70
2 ◎
range of products to DH-14 or DH-16 Caution Lineset combinations and temperature
Neutral Colors Optional Gasket for joint between MD duct and indoor unit
Blend in well with the overall color scheme of the Rubber Gasket MG is used to enhance the
interior, or exterior, of any building. appearance of the joint between the indoor
unit and the SLIMDUCT MD.
Ivory Neo White Neo White ※This fitting may not be suitable for use with certain models of
indoor units.
Finished appearance
Accomodates larger diameter insulated drain Large Range of Fittings
hose required for interior installations
14 different fittings enable SLIMDUCT MD to
SLIMDUCT MD is designed for ease of easily be customized to suit a wide variation of
SLIMDUCT SD SLIMDUCT MD application as well as to facilitate the use interior wall finishes and configurations.
of insulated drain hose which is used more
frequently(by a factor of 300%)in indoor
applications. Extend
Excellent Performance
Cross section
(outdoor use)
TY &
SAFE BEAUTY
Twist
Flame Retardant
SLIMDUCT MD conforms to the requirements
of UL-94-V-0.* Insulated drain hose
(indoor use)
23 24
SLIMDUCT MD
MD SLIMDUCT MD Ducting
MK 90°FLAT ELL MKF 45°FLAT ELL
Dimensions 2000
Ivory Neo White
B 50 100
A
MD-751 MD-751 MD-851 Unit : mm
45
°
φ4
C
φ4
A
MW
A
C
WALL INLET
Unit : mm Unit : mm
Dimensions C E H
Code No. Item No. A B C Pcs/Pkg Code No. Item No. A B C Pcs/Pkg
I
ç 61202 MK-75 80 70 114 20 ç 61252 MKF-75 80 70 63 20
15
G
ç 61215 MK-85 90 75 124 10 ç 61265 MKF-85 90 75 68 10
J
A φ4
Shows how cap
conceals screw
B
Unit : mm
Code No. Item No. A B C D E F G H I J Pcs/Pkg ※ Plastic cap is included so MCI 90°INSIDE VERTICAL ELL MCO 90°OUTSIDE VERTICAL ELL
ç 61102 MW-75 80 70 103 106.5 73.5 70.5 22 70 89.5 11 20 screw head is not exposed.
Dimensions Dimensions A 15
K
D
C
A φ4 2-φ4
B
B
C
※ Plastic cap is included so
B
25
Unit : mm A
40 Unit : mm φ4 Unit : mm
Code No. Item No. Compliant item A B C D E F G H I J K Pcs/Pkg
ç 61112 MWM-75-S AC-67,75 Others : Flange O.D. ∼φ108mm + H ∼8mm 80 70 126 150 73.5 15 26 98 75 20 124 20 Code No. Item No. A B C Pcs/Pkg Code No. Item No. A B C Pcs/Pkg
ç 61122 MWM-75-L AC-67,75,100/WC-60N,65N,75N Others : Flange O.D. ∼φ136mm + H ∼10mm 80 70 146.5 177 73.5 15 27 108 75 20 151 20 ç 61402 MCI-75 80 70 92 20 ç 61302 MCO-75 80 70 103 20
ç 61155 MWM-85 AC-67,75,100/WC-60N,65N,75N Others : Flange O.D. ∼φ136mm + H ∼10mm 90 75 146.5 177 78 15 27 113 85 20 151 10 ç 61415 MCI-85 90 75 96 10 ç 61315 MCO-85 90 75 109 10
G F E
Can be adjusted to correct upto 255mm φ4.2
C E
Image
misalignment of wall opening
D
Shows how cap
conceals screw 75 : 75mm
75mm∼130
75mm∼130mm
∼130mm
mm
85 : 80mm
80mm∼135
80mm∼135mm
∼135mm
mm
C
D
MCS
A F
A
Unit : mm Unit : mm
Code No. Item No. A B C D E F G Pcs/Pkg Code No. Item No. A B C D E F G Pcs/Pkg
B
40
25
φ4.2 C
A
A
MN-75 MN-85
C
B C
A
B
φ4.2
25
Before After Unit : mm
Unit : mm MN-75 MN-85
※ The MG RUBBER GASKET may not be suitable for use with indoor A/C units from all manufacturers due to differing surface and shape configurations.
・
・・・
・・・
・・
C MK Ⓔ 90°OUTSIDE VERTICAL ELL ・ ・
・・・
・・・MCO
60
More than 130mm from Soffit 75 to 130mm from Soffit Less than 75mm from Soffit
B
A
Unit : mm Unit : mm
130mm
130
130mm∼
mm∼ 75mm
75
75mm∼130mm
mm∼130
∼130mm
mm ∼75
∼75mm
75mm
mm
Code No. Item No. A B Pcs/Pkg Code No. Item No. A B Pcs/Pkg
ç 61502 MJ-75 80 70 20 ç 61602 MF-75 75 65 20
ç 61515 MJ-85 90 75 10 ç 61615 MF-85 92 77 10 MCO MCI MCS
Material … PE+EVA
● MF
※ Use MF in combination with MJ coupler or ell at either end.
(MF-85 requires MFJ adaptor.)
MFJ MP
Typical Installation
FLEXIBLE ADAPTOR SOFFIT INLET ■ Specification
Temperature Range −20℃∼60℃
Dimensions
Application Wall Mounted
Material Rigid Polyvinyl Chloride(UV Stabilized and Fire Resistant)※Excludes some items
C 7
Ivory(Silky White) ※Excludes some items
Color MD-751
Neo White
MD-851 Neo White
D
E
B
■ The table below shows the maximum size lineset combinations that can be contained in SLIMDUCT MD :
Dimensions A F
70
Item No. Insulation Thickness 10×10mm
φ4
MD-751 6.35×9.52 ∼ 6.35×12.70+DSH-14
30
Caution ● SLIMDUCT MD duct and fittings are suitable for use and wall and to tighten fixing screws is highly discouraged as
A
D φ4 Unit : mm storage within a temperature range of −20℃ to 60℃. they can easily overtighten the screws and crack the
Unit : mm Deformation may occur at temperatures exceeding 60℃. PVC material. Use hand screwdrivers for precise torque
Code No. Item No. A B C D E F Material Pcs/Pkg ● When attaching SLIMDUCT MD to wall, USE ONLY control.
Code No. Item No. A B C D E F Pcs/Pkg ç 61802 MP-75-I 81 69 110 132 102 20 ABS 20 PAN HEAD SCREWS. DO NOT USE FLAT HEAD OR ● Use SL-300 STRAP KIT to retain lineset inside duct.
COUNTERSUNK SCREWS AS THEY CAN EXERT TOO ● SLIMDUCT MD IS NOT WATERPROOF. For external
ç 61665 MFJ-85 90 75 45 30 97 82 10 ç 61815 MP-85 92 75 120 135 110 15 PVC 10 MUCH PRESSURE AND CRACK THE PVC MATERIAL. use, seal all longtitudinal and lateral seams, screw heads
● Use of impact screwdrivers to attach SLIMDUCT MD to and wall penetrations with weatherproof sealant or putty.
27 28
Commercial & Multiple Lineset Ducting System
Innovative Lineset Ducting System
for VRF Installations
Beautiful Finish
Sophisticated
The high quality finish of the SLIMDUCT RD series blends in well
with commercial buildings. The exterior of any building will be
enhanced by the sleek appearance of the finished installation.
SLIMDUCT
SLIMDUCT RD RD series
series is
is fabricated
fabricated from
from“ZAM”
“ZAM”aa highly
highly corrosion
corrosion resistant
resistant hot
hot
dip galvanized steel which is equal to or exceeds the corrosion resistance
dip galvanized steel which is equal to or exceeds the corrosion resistance
properties
properties of
of standard
standard hothot dip
dip galvanized
galvanized steel
steel(HDZ55)
(HDZ55)or or Galvalum
Galvalum(AZ150)
(AZ150) ..
Excellent Performance
29 30
SLIMDUCT RD
Examples of Typical Installations
RD SLIMDUCT RD Ducting
Width of mineral
Length Width Height
Anti-slip sheet Code No. Item No. coating anti-slip Pcs/Pkg
(L) (W1) (H)
tape(W2)
RE 90°
FLAT ELL REWK 90°FLAT ELL ‒ WALKWAY Special Order Only ! RCI 90°
INSIDE VERTICAL ELL
Code No. Item No. Width(W) Height(H) L Pcs/Pkg
L
L ç 84755 RCⅠ-300-ZA 300 131 260 1
ç 84775 RCⅠ-450-ZA 450 131 260 1
H H
H H
W2 L
L
ç 84795 RCⅠ-600-ZA 600 131 260 1
ç 89055 RCⅠ-900-ZA Special Order Only ! 980 200 378 1
W
W L W L ç 84515 RCⅠ-300H-ZA 300 251 380 1
W1
Unit:mm
300∼600(H) 900(H) Unit:mm ç 84815 RCⅠ-450H-ZA 450 251 380 1
Unit:mm
Code No. Item No. Width(W) Height(H) L Pcs/Pkg ç 84835 RCⅠ-600H-ZA 600 251 380 1
※To connect between elbow parts on size 900H use RXJ, contact
ç 77115 RE-150-ZA 150 111 250 1 Width of mineral INABA DENKO for further details. ç 89305 RCⅠ-900H-ZA Special Order Only ! 980 320 498 1
Width Height coating anti-slip Pcs/Pkg
ç 85167 RE-300-A-ZA 300 131 500 1 Code No. Item No. L
RCO
(W1) (H) tape
ç 85177 RE-450-A-ZA 450 131 650 1 (W2) 90°
OUTSIDE VERTICAL ELL
ç 85187 RE-600-A-ZA 600 131 800 1 ç 80775 REWK-300-ZA Special Order Only ! 300 134 500 186 1
ç 84497 RE-300H-A-ZA 300 251 500 1 ç 80785 REWK-450-ZA Special Order Only ! 450 134 650 288 1 L Code No. Item No. Width(W) Height(H) L Pcs/Pkg
L W
ç 85197 RE-450H-A-ZA 450 251 650 1 ç 80795 REWK-600-ZA Special Order Only ! 600 134 800 388 1 ç 84765 RCO-300-ZA 300 131 281 1
ç 85207 RE-600H-A-ZA 600 251 800 1 ç 80805 REWK-300H-ZA Special Order Only ! 300 254 500 186 1 L ç 84785 RCO-450-ZA 450 131 281 1
※Size 600H is supplied reinforced to prevent deflection as standard. ç 80815 REWK-450H-ZA Special Order Only ! 450 254 650 288 1 H L ç 84805 RCO-600-ZA 600 131 281 1
This is an optional accessory on size 450H. ç 80825 REWK-600H-ZA Special Order Only ! 600 254 800 388 1 H ç 89065 RCO-900-ZA Special Order Only ! 980 200 378 1
※Use RX-900 (H)as flat ell for size 900(H) .
※Use RXW-900
(H)as flat ell for size 900
(H)
. W ç 84525 RCO-300H-ZA 300 251 401 1
ç 84825 RCO-450H-ZA 450 251 401 1
RF
300∼600(H) 900(H) Unit:mm
45°
FLAT ELL ※To connect between elbow parts on size 900H use RXJ, contact
ç 84845 RCO-600H-ZA 600 251 401 1
INABA DENKO for further details. ç 89315 RCO-900H-ZA Special Order Only ! 980 320 498 1
Code No. Item No. Width(W) Height(H) L Pcs/Pkg
RCF
150∼600(H)
L L ç 77125 RF-150-ZA 150 111 131 1 45°
VERTICAL ELL
ç 85217 RF-300-A-ZA 300 131 327 1
H ç 85227 RF-450-A-ZA 450 131 393 1 Code No. Item No. Part No. Width(W) Height(H) L Pcs/Pkg
RCFI
W
ç 85237 RF-600-A-ZA 600 131 456 1 ç 77145 RCF-150-ZA − 150 111 111 1set
H
ç 89045 RF-900-ZA Special Order Only ! 980 200 558 1 ç 85315 RCF-300-ZA − 300 131 147 1set
L L ç 84507 RF-300H-A-ZA 300 251 327 1 L
ç 85325 RCF-450-ZA − 450 131 147 1set
900(H) ç 85247 RF-450H-A-ZA 450 251 393 1 W L ç 85335 RCF-600-ZA − 600 131 147 1set
H
ç 85257 RF-600H-A-ZA 600 251 456 1 L ç 84665 RCF-300H-ZA − 300 251 197 1set
RCFO
ç 89295 RF-900H-ZA Special Order Only ! 980 320 558 1 L ç 85345 RCF-450H-ZA − 450 251 197 1set
W
※Size 600H is supplied reinforced to prevent deflection as standard. This is an optional accessory on Contents
ç 85355 RCF-600H-ZA − 600 251 197 1set
For inside × 1 pc.
size 450H. For outside × 1 pc. ç 89665 RCF-900H-ZA RCF I -900H-ZA 197
Unit:mm ※To connect between elbow parts on size 900H use RXJ, contact INABA DENKO for further details. Baseplate × 1 pc. 900 251 1set
※Height of stand for size 900
(H)is 30mm lower than ducting. Unit:mm * Except 900(H)
ç 89675 Special Order Only ! RCFO-900H-ZA 203
RFWK 45°
FLAT ELL ‒ WALKWAY Special Order Only !
RSS TELESCOPIC COUPLER
Width of mineral
Width Height coating anti-slip Pcs/Pkg Layout Truss screw M6×20L
300∼600(H) 900(H) Code No. Item No. L A
Outer cover
(W1) (H) tape 45°
VERTICAL ELL Base
L L L (W2) Flange nut M6
Inner cover
ç 80835 RFWK-300-ZA Special Order Only ! 300 134 327 186 1
L
L H
ç 80845 RFWK-450-ZA Special Order Only ! 450 134 393 288 1 Base Base
Bush
W2 20
Ditch guide
C
ç 80855 RFWK-600-ZA Special Order Only ! 600 134 456 388 1 D
3-φ12
Truss screw
M6×15L
W2
H
W1
ç 89615 RFW-900-ZA Special Order Only ! 980 200 558 368 1 B Bush
L
ç 80865 RFWK-300H-ZA Special Order Only ! 300 254 327 186 1 Truss screw M6×15L
E
W1 ç 80875 RFWK-450H-ZA Special Order Only ! 450 254 393 288 1 D 45°
VERTICAL ELL Base Flange nut M6
4-φ8 Base
ç 80885 RFWK-600H-ZA Special Order Only ! 600 254 456 388 1 Unit:mm Splint Truss screw M6×20L
Unit:mm ç 89625 RFW-900H-ZA Special Order Only ! 980 320 558 368 1 Code No. Item No. A B C D E L Pcs/Pkg Code No. Item No. A B C D E L Pcs/Pkg
ç 85637 RSS-300-1-A-ZA 160 20∼120 1 ç 84597 RSS-300H-1-A-ZA 160 20∼120 1
RC
ç 85647 RSS-300-2-A-ZA 295 260 266 120∼220 1 ç 84607 RSS-300H-2-A-ZA 295 260 266 120∼220 1
90°
VERTICAL ELL(SIZE 150) ç 85657 RSS-300-3-A-ZA 360 220∼320 1 ç 84617 RSS-300H-3-A-ZA 360 220∼320 1
ç 85667 RSS-450-1-A-ZA 160 20∼120 1 ç 85727 RSS-450H-1-A-ZA 160 20∼120 1
ç 85677 RSS-450-2-A-ZA 445 260 416 120∼220 1 ç 85737 RSS-450H-2-A-ZA 445 260 416 120∼220 1
ç 85687 RSS-450-3-A-ZA 360 220∼320 1 ç 85747 RSS-450H-3-A-ZA 360 220∼320 1
L 105 060 225 140
ç 85697 RSS-600-1-A-ZA 160 20∼120 1 ç 85757 RSS-600H-1-A-ZA 160 20∼120 1
L ç 85707 RSS-600-2-A-ZA 595 260 566 120∼220 1 ç 85767 RSS-600H-2-A-ZA 595 260 566 120∼220 1
H ç 85717 RSS-600-3-A-ZA 360 220∼320 1 ç 85777 RSS-600H-3-A-ZA 360 220∼320 1
ç 84937 RSS-900-1-A-ZA Special Order Only ! 160 20∼120 1 ç 84967 RSS-900H-1-A-ZA Special Order Only ! 160 20∼120 1
Code No. Item No. Width(W) Height(H) L Pcs/Pkg ç 84947 RSS-900-2-A-ZA Special Order Only ! 895 260 866 120∼220 1 ç 84977 RSS-900H-2-A-ZA Special Order Only ! 895 260 866 120∼220 1
W ç 77135 RC-150-ZA 150 111 210 1 ç 84957 RSS-900-3-A-ZA Special Order Only ! 360 220∼320 1 ç 84987 RSS-900H-3-A-ZA Special Order Only ! 360 220∼320 1
※Includes 2 extra parts which allow this fitting to be used as an Inside vertical ell ※RSS cannot be connected directly into a WALKWAY elbow unless it is extended to its maximum length and is attached using the outer edges of the slotted fixing
Unit:mm holes along its sides and bottom.
or an Outside vertical ell.
※TELESCOPIC COUPLER ‒ WALKWAY is a non standard item, only available on special order.
33 ※When connecting RSS to 2m or 1M lengths of RD duct or to 45º elbow RCF, the included baseplate can be used. If RSS needs to be connected to any other 34
fitting, a baseplate will have to be purpose made on site.
SLIMDUCT RD
RT TEE RSJ-A COUPLER For standard length duct & elbow parts
RTWK TEE ‒ WALKWAY *1 To attach 900H ells, use only RXJ coupler.
Unit:mm
RX
fixed plate
CROSS Unit:mm
ç 84887 RFJ-900H-A-ZA *1 Special Order Only ! 895 225 140 1
*1 To attach 900H ells, use only RXJ coupler.
L
Code No.
ç 84655
Item No.
RX-300H-ZA
L W H
500 300 251 Size 300 × 2 pcs.
Branch fitting Pcs/Pkg
1 RR REDUCER
ç 85415 RX-450H-ZA 650 450 251 Size 450 × 2 pcs. 1
H
Truss screw Code No. Item No. Pcs/Pkg
ç 85425 RX-600H-ZA 800 600 251 Size 600 × 2 pcs. 1
Outer cover ç 85435 RR-300-150-ZA 1
※Use only with standard RD duct, not H type. RX has a fixing tab which mates up
W
with a corresponding hole on end of RD duct. If RD duct is cut to length on site,
Bush ç 85447 RR-450-300-A-ZA 1
Truss screw
the hole for fixing screw to RX will no longer be present and joint cannot be secured.
M6×15L
ç 85457 RR-600-300-A-ZA 1
※This fitting can be used as a tee when required. Close unused opening with
the attached plate.
ç 85467 RR-600-450-A-ZA 1
REDUCER
Unit:mm
※Height of stand for cross is 30mm higher than ducting. Inner cover ç 84897 RR-900-600-A-ZA Special Order Only ! 1
ç 84547 RR-300H-300-A-ZA 1
Bigger duct ç 88957 RR-450H-300H-A-ZA 1
RX RXW
ç 85487 RR-450H-450-A-ZA 1
CROSS SIZE 900 CROSS SIZE 900 ‒ WALKWAY
RD Stand
Bush ç 88967 RR-600H-300H-A-ZA 1
Truss screw ç 85507 RR-600H-450-A-ZA 1
Smaller duct Flange nut M6×15L
Special Order Only ! Special Order Only !
Unit:mm
ç 85527 RR-600H-600-A-ZA 1
※Baseplate is not available for REDUCER. ç 85517 RR-600H-450H-A-ZA 1
W2 W2
For applications to vertical wall, do not use brackets to mount RR Reducer.
To connect RR reducer to any other fitting, a baseplate will have to be purpose made on site. ç 84907 RR-900H-600H-A-ZA Special Order Only ! 1
RR
H H
Unit:mm Unit:mm
Reinforced plate
Bigger duct
Code No. Item No. Width(W) Height(H) Pcs/Pkg
Cover
ç 89075 RX-900-ZA Special Order Only ! 980 197 1 Truss screw
ç 89325 RX-900H-ZA Special Order Only ! 980 317 1 M6×15L
35 36
SLIMDUCT RD
202
164
L2
combination found in the column
H1
H2
800 790
closest to the height will give the 750 750 RZB-L
L3 55
L3 70 most practical selection. 730
700
※Contact surfaces on neck and flange include a factory fitted polyethylene foam gasket. Unit:mm
● The combination of S Type RZB RZB-L
φ6 Tapping screw × 25
Code No. Item No. L1 L2 L3 H1 H2 Pcs/Pkg Risers and S Type RZM Brackets is 650
640 RZB-L 630
Size 300(H)
・450(H) only used for vertical wall mounted RZB-ML
600(H)
・900(H) ç 77185 RWP-150-ZA 242 56 204 − − 1 600 590
600
applications. RZB-L
ç 75115 RWP-300-ZA 414 160 363 242 192 1 550
RZB-L
RZB-M
540 540 540 540 540 530 540
ç 75165 RWP-450-ZA 564 310 514 242 192 1
500 RZB-S
ç 79205 RWP-600-ZA 714 400 664 242 192 1 480 RZB-ML 480 480 480
ç 89186 RWP-900-A-ZA Special Order Only ! 1014 650 964 242 192 1 450 450 RZB-ML
420
ç 84675 RWP-300H-ZA 414 160 363 362 312 1 400 400 RZB-ML RZB-M
380
ç 76865 RWP-450H-ZA 564 310 514 362 312 1 RZB-ML
RZB-S
350 350 350 RZB-M 350 350
φ6 Tapping screw × 25 ç 79355 RWP-600H-ZA 714 400 664 362 312 1 330 320 330 330
ç 89466 RWP-900H-A-ZA Special Order Only ! 1014 650 964 362 312 1 300
280
RZB-S ※Notation
RZB-M
270 270
RZB-M H2
250
RSB
230 230 230
130
Dimensions
5 100
1.6t
Y part
20 50
16 ■Anchor interval
ç 85865 RSB-450H-ZA 541 441 207 378 481 267 1
50
120 45
B
Seal with curing Cover
(RZM)
A putty around. ç 85875 RSB-600H-ZA 691 591 207 528 631 267 1 Type P(mm)
H 55
Unit:mm A-φ10.5
※Use CHAMBER BOX(CB)as wall sleeve for size 900
(H)
. 300 306 Type Code No. Item No. A H Pcs/Pkg
Base
(RZB)
450 456 S ç 73695 RZB-S-ZA 4 100 20set
it y
e s dduurraabbilil it y
600(H)
impprroovv e s
im Type Code No. Item No. A B C H L t Pcs/Pkg
I
A 72.3
Improves durability !! B ç 73535 RZM-300-S-ZA 248 195 − 128 360 1.4 2
C
Caulking material
D Seal with curing putty. ç 73545 RZM-450-S-ZA 398 195 − 128 510 1.4 2
E Foaming seal S
applied on site Wall ç 73555 RZM-600-S-ZA 548 195 345 128 680 1.4 2
891
RSP-A 788 ç 73565 RZM-900-S-ZA Special Order Only ! 848 345 600 128 980 2.0 2
4-φ6.5
16-φ9 1.6t ç 73575 RZM-300-MS-ZA 248 195 − 178 360 1.4 2
ç 73585 RZM-450-MS-ZA 398 195 − 178 510 1.4 2
MS
156
221.4
382
312
Dimensions
193
300・450
ç 73605 RZM-900-MS-ZA Special Order Only ! 848 345 600 178 980 2.0 2
71.6 A
ç 73825 RZM-300-MM-ZA 248 195 − 270 360 1.4 2
86.4
320 B 2-φ13×30L t
485
650 Foaming seal ç 73835 RZM-450-MM-ZA 398 195 − 270 510 1.4 2
MM
60
964 Seal with curing putty.
3-φ10.5
1067.2 L
A−A’Cross section
ç 73845 RZM-600-MM-ZA 548 195 345 270 680 1.4 2
Unit:mm
ç 73855 RZM-900-MM-ZA Special Order Only ! 848 345 600 270 980 2.0 2
H
Code No. Item No. A B C D E F G H I Pcs/Pkg A A’
ç 73615 RZM-300-M-ZA 248 195 − 328 360 1.4 2
ç 85787 RSP-300-A-ZA 160 291 364 434 467.2 82.5 1 ç 73625 RZM-450-M-ZA 398 195 − 328 510 1.4 2
600・900 C
M
ç 85797 RSP-450-A-ZA 310 441 514 584 617.2 192 278.6 87 83.5 1 B
t ç 73635 RZM-600-M-ZA 548 195 345 328 680 1.4 2
4-φ13×30L
ç 85807 RSP-600-A-ZA 400 591 664 734 767.2 83.5 1 60 ç 73645 RZM-900-M-ZA Special Order Only ! 848 345 600 328 980 2.0 2
A−A’Cross section
ç 84627 RSP-300H-A-ZA 160 291 364 434 467.2 1 A
3-φ10.5
ç 73655 RZM-300-L-ZA 248 195 − 478 360 2.0 2
L
ç 85817 RSP-450H-A-ZA 310 441 514 584 617.2 312.4 398.6 207 79.5 1 ç 73665 RZM-450-L-ZA 398 195 − 478 510 2.0 2
L
ç 85827 RSP-600H-A-ZA 400 591 664 734 767.2 1 ç 73675 RZM-600-L-ZA 548 195 345 478 680 2.0 2
H
A A’
ç 89497 RSP-900H-A-ZA Special Order Only ! Refer the dimension 1 Unit:mm ç 73685 RZM-900-L-ZA Special Order Only ! 848 345 600 478 980 2.0 2
37 38
SLIMDUCT RD
RZ-150 SINGLE BRACKET for Horizontal Installations(SIZE 150) (Not for vertical installation)
RZY DUPLEX BRACKET
160
50
80
L
Code No. Item No. L Pcs/Pkg Code No. Item No. Pcs/Pkg
50
L
150 80
Code No. Item No. Compliant duct size Pcs/Pkg
Code No. Item No. Pcs/Pkg ç 74865 RDK-300-ZA 300(H) 2
ç 77235 RZW-150-ZA 2 ç 74885 RDK-450-ZA 450(H) 2
Unit:mm
※Use RZM-S + RZB-S except the size 150. ç 74845 RDK-600-ZA 600(H) 1
A
M6×15L ç 85975 REC-300-ZA 296 127 60 1
H
70 ç 85985 REC-450-ZA 446 127 60 1
70
70 80
ç 85995 REC-600-ZA 596 127 60 1
ç 88335 REC-900-ZA Special Order Only ! 896 127 60 1
160
A
Bush ç 84645 REC-300H-ZA 296 247 140 1
3/ W×12
8 L ç 86005 REC-450H-ZA 446 247 140 1
Unit:mm
ç 86015 REC-600H-ZA 596 247 140 1
78
Code No. Item No. A Pcs/Pkg Unit:mm ç 88345 REC-900H-ZA Special Order Only ! 896 247 140 1
50
ç 86055 RDY-300-ZA 266 1
Unit:mm ç 86065 RDY-450-ZA 416 1
D
B
C
B 60
A PB-120 A
60
D
B
2 205.5
39 40
SLIMDUCT RD
Walkway Type
49,030N/m2 or less 980N or less 450
10×10 12 11 9 9 7 7 6 5 5 5
RD-150 12,548N(1,280kgf) 9,387N(958kgf) (5,000kgf/m2 or less)(100kgf or less) 10×20 9 8 7 6 6 4 4 3 3 3 Caution
L = H + 251
W
600, 600H x = 2 × W ー 704.5 L = W + 664 The coating layer on high grade corrosion installation with a protective cover to
300H, 450H x = 2 × H ー 342.4 to a grayish black, providing a high level of
* resistant hot dip galvanized steel sheet prevent any damage from any alkaline
600H, 900H
900, 900H x = 2 × W ー 685.9 L = W + 705.9 L L = H + 300 corrosion protection for the edges. liquids or metal shavings from copper
L
contains Zinc which offers a higher degree
● Always use safety protection gear(drop pipe cutting operations nearby.
* Size 900 & 900H require an extra 20mm to be added to duct length to allow for of ionization, preventing white rust(Zinc
10mm insertion into elbow at each end. cloth, gloves & goggles)during installation. Hydroxide)from eroding the base steel at
● When cutting duct on site, always repair cut ■ Caution during Storage
cut edges and at any point where the
Mechanism of Corrosion Resistance at Cut End of Duct edges with a coat of Zinc Chromate paint surface has been damage by abrasion or If material is stored outside, protect from
(ZN-AL). scratching. rain with a waterproof cover and remove
this when rain stops. If material is to be
SLIMDUCT RD-ZA series is fabricated from the new“ZAM”※ Initial exposure Medium term exposure
Long term exposure It is important not to damage the surface
shipped by ocean freight, do not permit
(up to several weeks) (a few weeks ∼ several years) ■ Change in Appearance of ZA Type protection coating during installation in
material, a highly corrosion resistant hot dip galvanized steel material to become exposed to sea water
The surface of a high grade corrosion order to maintain long term corrosion
which is equal to or exceeds the corrosion resistance Coating layer Coating layer Coating layer during shipping, handling or storage at
resistant hot dip galvanized steel sheet is resistance.
dockside.
properties of standard hot dip galvanized steel(HDZ55)or Base steel Base steel Base steel formed of a precise coat of oxide which
GALVALUM(AZ150). This offers superior resistance over Zinc protective film Zinc protective film
DHQ DRAIN HOSE - Outdoor DS DRAIN HOSE SADDLE DHB MINI INLINE TRAP
Specification Accelerated Weather Resistance Test(Sunshine Weather Meter) Dimensions Dimensions
● Material … LLDPE
UV resistant version!! ● Cuff spacing … 500mm
DRAIN HOSE - Outdoor(DHQ) A 37
● Color … Ivory
D
E
25
Portable carton with Features
removable EASY FEED flap ● Double the UV resistance 17 B
of the DH series. 0 hrs 500 hrs 1000 hrs 2000 hrs C
Accelerated weather DRAIN HOSE - Standard(DH) 8 φ4
resistance test shows no
damage after 2000 hours.
78
or o utst an d Destruction
df in ● Double layer construction
re Unit:mm
increases durability.
gg
ee
ayy
dduu
Caution
material gives excellent ● Weather resistant. DRAIN HOSE.
ilitty
DC DRAIN CAP
● Easy to clean.
DH DHJ
● Accepts DHQ 14 & DHQ 16 without adaptor.
DRAIN HOSE ‒ Standard DRAIN HOSE COUPLER Caution ● This product does not produce a 100% seal. Under extremely high
Dimensions negative pressure conditions inside the building some outside air may
“Easy-feed”& portable package Specification be admitted.
● Material … PE φ23 20
● Color … Ivory Code No. Item No. Compliant drain hose Pcs/Pkg
● Cuff diameter accepts
ç 08110 DHB-1416 DHQ-14・DHQ-16 50
both14mm and 16mm
sizes.
● Cuff spacing … 500mm
Caution
● Protect from weather by
Unit:mm DL DRAIN CHANNEL
taping or enclosing in Installation Features ● Prevents insects from entering
trunking. DRAIN HOSE.
Dimensions DRAIN HOSE
● Clips easily onto O.D. of
● Do not use bend radius Dimensions Use ● Connects cut lengths of
φ18.3
φ16
φ18
W
● Gray color easily blends in with
DL-H
Nominal Hose I.D. Length Hose O.D. Max O.D. Code No. Item No. Compliant drain hose O.D. Length Pcs/Pkg
ç 08032 DH-14 φ14 φ13.5 50m φ18.3 φ22 8 ç 08860 DHJ-14 DH-14・DHQ-14 φ21.9 28 100 DRAIN CHANNEL ADAPTOR Unit:mm
concrete flooring material.
● Easy to cut with snips or blade.
ç 08012 DH-16 φ16 φ16 50m φ20.8 φ22 6 ç 08870 DHJ-16 DH-16・DHQ-16 φ24.4 28 100 ※ Requires adhesive to stick
permanently onto floor.
Specification ● Material … PVC
※ Use in combination with DL-H Color … Gray
DY NDH
DRAIN CHANNEL ADAPTOR. Temperature range … −20℃∼60℃
VENTED DRAIN WYE DRAIN HOSE ADAPTOR Code No. Item No. Length(L) Width(W) Height(H) Pcs/Pkg
ç 23411 DL-25 25m 55mm 5.5mm 1
& 16
of the size 14 NDH
Multiple uses
Adapter DRAIN
for 25A body DL-H13 DL-H20
HOSE
(NDA)
DRAIN PIPE
Dimensions
Specification CAUTION FOR DRAIN HOSE & ACCESSORIES(OUTDOOR)
Body COUPLER ● Material … PVC
(NDH) ● Use only outdoors as insufficient sealing may lead to water leakage.
Color … Gray
● Although these are weather resistant products, extreme weather
Features Caution ● Use only with drain hose Temperature range … −20℃∼60℃
H
INSULATED DRAIN HOSE FP PLAIN WALL SLEEVE FPW FLANGED WALL SLEEVE
Dimensions
t=1mm
Prevents Sweating Insulated to Prevent Sweating E C
Pliable and easy to work Prevents sweating under extreme conditions of 15℃
condensate temperature, 30℃ ambient temperature and
φB
φA
D
70% RH.
Typical installation in combination
Easy to Work With with WC WALL FLANGE
Unit:mm
Internal PE hose cuts easily with blade or snips. Features ● Cutmarks embossed
Dimensions
t=1.5mm at 1cm intervals on Features ● Cutmarks embossed at 1cm
Smooth Bore Interior 66.5mm
66.5mm I.D.
I.D. accommodates
accommodates
sleeve surface air
air intake
intake hose
hose intervals on sleeve surface
φB
facilitate cutting to correct length.
φA
Reduces resistance and maximizes condensate flow. facilitate cutting to
correct length. ● Integral flange prevents loss inside
Soft but strong enough to do the job ! Soft and Pliable 10
110 Specification ● Material … PE
wall cavity.
● Can be used with WC & UC WALL
Independent layers plus spiral insulation layer make ● Color … Ivory
200 FLANGE.
bending easy and facilitate installation in tight spaces. Unit:mm
Specification ● Material … PE+PP
● Color … Ivory(Silky White)
Applicable A B I.D. in I.D. in Core drill Pcs
Code No. Item No. combination combination
WALL CAP (I.D.) (O.D.) with UWC with WC diameter /Pkg
ç 03860 FP-60N WC-60N,UWC-60 61.5 63.5 58 57 65 100 Code No. Item No. A(I.D.) B(O.D.) C D E Core drill diameter Pcs/Pkg
Data shows superior performance in sweat prevention Example of Typical Installation ç 03870 FP-65N WC-65N,UWC-65 66.5 68.5 63 62 70 100 ç 03950 FPW-60 61.5 63.5 180 83.5 70 65 100
ç 03880 FP-75N WC-75N 75.5 78.5 − 71 80 100 ç 03960 FPW-65 66.5 68.5 200 88.5 76 70 50
DSH-14 DSH-20N DSH-25N ● Room A/C Installation - Size 14
Pipe internal temperature 15℃ Pipe internal temperature 15℃ Pipe internal temperature 15℃
Pipe internal temperature 10℃ INSULATED DRAIN HOSE(DSH-14)
Pipe internal temperature 10℃ Pipe internal temperature 10℃
100
Ambient relative humidity(%)
80
90
80
90
80
FPS FLANGED WALL SLEEVE NFP NEW WALL SLEEVE
70 70 Hose to A/C Features ● Integral 5º slope ensures Dimensions
70
Attached Hose Hose to correct pitch for drain line.
60 60 60 Ref. Combination dimensions
0 10 20 30 0 10 20 30 0 10 20 30
COUPLER Hose Socket ● Sleeve is easily secured
(DSH-14C) COUPLER DRAIN HOSE - OUTDOOR tightly onto wall by 30
Ambient temperature(℃) Ambient temperature(℃) Ambient temperature(℃) (DSH-14H) (DH-14・16)
tightening locknut.
● Material … PE
φB
φA
Specification
φC
DSH
● Color … Ivory
INSULATED DRAIN HOSE(Soft Type) Unit:mm
Dimensions F
Features ● Soft and pliable for easy installation.
DSH-14 Code No. Item No. A(O.D.) B(I.D.) C Core drill diameter Pcs/Pkg
● Easily cut to length.
ç 03660 NFP-60 61.5 50.5 85 65 100
A
ç 03670 NFP-65 66.5 55.5 90 70 100
Code No. Item No. Hose I.D. Hose O.D. Length Insulation thickness Pcs/Pkg 5 14 ç 03680 NFP-75 76.5 65.5 100 80 50
ç 08310 DSH-14 φ14.5 φ26.5 20m 6mm 4 200
(Effective 180)
Unit:mm Features ● Length adjusts between 100 ● Unitary construction is
ç 08960 DSH-20N φ19.0 φ31.0 20m 6mm 1 & 180mm without cutting. easy to caulk and
ç 08970 DSH-25N φ25.0 φ37.0 20m 6mm 1 Code No. Item No. A I.D. Core drill diameter Effective length(max) F Pcs/Pkg ● Wide flange allows for prevents water and pest
ç 03910 FPS-60 94.5 58.5 φ65 180㎜ 17 50 installation up to 5°slope. damage.
● All 3 sizes accept standard
ç 03920 FPS-65 99.5 63.5 φ70 180㎜ 17 50
DSH-S
NWM HOLE COVER. Specification ● Material … PE
INSULATED DRAIN HOSE KIT(Soft Type) ç 03930 FPS-85 130.0 84.5 φ95 180㎜ 23 10 ● Color … Ivory
Caution ● Joint, fixing and penetration points must be weatherproofed with Caution ● Joint, fixing and penetration points must be weatherproofed
Features ● Complete kit provides best value. caulk or putty. with caulk or putty.
DSH-14S ● When drilling hole in wall, take into account wall thickness as well
● Can not be adjusted for lengths between 105 & 127 mm.
as slope to ensure that 5º pitch is maintained.
NFP-S
Code No. Item No. Contents Pcs/Pkg A(Flange) B(Body) C(End)
■ Combination Dimensions
Accessories for INSULATED DRAIN HOSE Parts Combination Adjustable Length NFP Required Q'ty
A+B
99∼105㎜ 1 sets
A+C
A+B+C 127∼180㎜ 1 sets
A+B+B+C 196∼255㎜ 2 sets
A+B+B+B+C 265∼330㎜ 3 sets
Code No. Item No. Contents Pcs/Pkg
※Minimum 24mm overlap required for each component when assembling.
Hose to Pipe Hose to Pipe Hose to Pipe Hose to A/C Attached Hose to Hose Socket Hose to Hose
ç 03810 NFP-60S NFP-60+(NWC-60+NWM-C)×2 30 ※To attach NWC WALL FLANGE to part B or C, adjust sleeve to exact
thickness of wall.
ADAPTOR ADAPTOR Fitting ADAPTOR Hose COUPLER COUPLER COUPLER ç 03820 NFP-65S NFP-65+(NWC-65+NWM-C)×2 30 ※To replace part A with NWC WALL FLANGE, reduce sleeve length to
φ14 φ20・25 φ20・25 φ14 φ14 φ14・20・25 ç 03830 NFP-75S NFP-75+(NWC-75+NWM-C)×2 30 10mm less than wall thickness.
45 46
WALL CAP TAPE
NWC WALL FLANGE for NFP NEW WALL SLEEVE WC WALL CAP HF ADHESIVE TAPE <Standard Thickness>
6
Code No. Item No. Size(W×L) Thickness Color Pcs/Pkg
D ç 13010 HF-0191-B 19mm×10m Brown 300
φC
φB
φA
A
B ç 13020 HF-0191-NI 19mm×10m New Ivory 300
Unit:mm 0.2
6 8 ç 0711 HF-50 50mm×20m Gray, White, Brown, Black, Ivory 80
30 Features ● Split construction ensures ease of installation.
mm
ç 07120 HF-50-NI 50mm×20m New Ivory 80
Unit:mm ● Use in combination with FP-60N, FP-65N, FP-75N.
● Locking tab snaps off to provide holes for extra mounting screws. ç 07132 HF-50-PM(PM TAPE)* 50mm×20m Similar color to PMH, PMH-S, NDD 80
Specification ● Material … ABS ● Color … Ivory ● Scored line facilitates trimming of flange to fit into tight spaces. *Stock only
Caution ● Use exclusively in combination with NFP NEW WALL SLEEVE. Specification ● Material … PP ● Color … Ivory
● Joint, fixing and penetration points must be weatherproofed with
caulk or putty.
Caution ● Joint, fixing and penetration points must be weatherproofed with
caulk or putty.
HV ADHESIVE TAPE < Reduced Thickness >
Code No. Item No. A B(O.D.) C(I.D.) Pcs/Pkg Code No. Item No. A B C(I.D.) D(O.D.) Pcs/Pkg Features ● Thinner than the older HF series, improved flexibility allows ease of application.
ç 03460 NWC-60 112 63.5 55.5 200 ç 03352 WC-60N 112 96 57 61.5 200 Specification ● Material … PVC
ç 03470 NWC-65 117 68.5 60.5 200 ç 03362 WC-65N 117 98 62 66.5 200
Code No. Item No. Size(W×L) Thickness Color Pcs/Pkg
ç 03480 NWC-75 127 78.5 70.5 100 ç 03372 WC-75N 127 105 71 75.5 200
ç 07082 HV-50-I 50mm×20m 0.18mm Ivory 80
ç 07092 HV-25-I 25mm×20m 0.18mm Ivory 200
Dimensions Dimensions
NEOPITA TAPE
Features ● Specially formulated non
82
A
φ
φ87
AC UWC
ç 07332 HY-75-I 75mm×18m 0.12mm Ivory 80
A/C CAP WALL CAP ‒ Thin Type
Dimensions
5 50
Dimensions
HN NON ADHESIVE TAPE
C
D
A
C
B
B 17
Unit:mm
Unit:mm Specification ● Material … PVC
Features ● Apply for WALL SLEEVE FP series.
Specification ● Material … ABS Caution ● Joint, fixing and penetration Code No. Item No. Size(W×L) Thickness Color Pcs/Pkg
Specification ● Material … PE
● Color … Ivory points must be weatherproofed ● Color … Ivory(Silky White) ç 0721 HN-50 50mm×18m 0.15mm Gray, White, Brown, Black, Ivory 120
(Silky White) with caulk or putty. Caution ● Joint, fixing and penetration ç 07220 HN-50-NI 50mm×18m 0.15mm New Ivory 120
Code No. Item No. Applicable pipe(I.D.×O.D.) A B C Pcs/Pkg points must be weatherproofed ç 0731 HN-75 75mm×18m 0.15mm Gray, White, Black, Ivory 80
with caulk or putty.
ç 03132 AC- 67 VP-65(67×76) 66.5 89 58.5 50
ç 03142 AC- 75 SU-75(75×80) 74.5 108 67.0 50 Code No. Item No. A B C(O.D.) D(I.D.) Pcs/Pkg Ref Tape color details
● Ivory Color Tapes HY, HF, HV are all similar in color to Ivory SD, NSD & LD lineset trunking.
SU-100(100×106) ç 03262 UWC-60 85 70 61.5 58 200 ● New Ivory Color Tapes HY, HN, HF, HV are all similar in color to insulation surface on PAIRCOIL or NEOCOIL insulated copper tube.
ç 03152 AC-100 99.0 130 91.0 50
VP-100(100×114) ç 03272 UWC-65 90 76 66.5 63 200
VT VINYL TAPE
AF HOLE CAP Wall Sleeve Closure Plate covers 60 ∼ 100mm diameter
PLAROCK
■ If anchor bolts or PR-P RETAINER CLAMPS
W3/8 Hex bolt L22mm, anti corrosion finish 2 pcs
cannot be used to secure PLAROCK to floor
W3/8 Hex bolt, anti corrosion finish 2 pcs surface, use PLASEAL EP-178 Epoxy Putty.
Washer, anti corrosion finish 2 pcs
※…Some products are supplied without bolts. Place putty evenly
450 450
350N series
L ç 14460 PRC-351N Ivory 50sets
* 2pcs/set
W
1
150 350 400 450
PR-P
Unit:mm
PLAROCK RETAINER CLAMP
Allowable load Dimension Attached
Series Code No. Item No. Color Pcs/Pkg
(N[kgf]) L×W1×W2×H(mm) bolt Specification ● Material(Surface treatment)
… SS41
● 2 pcs/set
150 ç 14340 PR-151 Ivory 1,372[ 140] 360× 86× 80× 40 Dacrotized 20 (Hot-dip galvanized)
ç 14260 PR-350N Black 1,372[ 140] 360×100× 80× 95 Dacrotized 20 ● Color … Gray
ç 14310 PR-351N Ivory 1,372[ 140] 360×100× 80× 95 Dacrotized 20
ç 14270 PR-350N-M Black 1,765[ 180] 450×100× 80× 95 Dacrotized 20
350
ç 14320 PR-351N-M Ivory 1,765[ 180] 450×100× 80× 95 Dacrotized 20
ç 14280 PR-350N-L Black 3,922[ 400] 1,000×100× 80× 95 N/A 4
ç 14330 PR-351N-L Ivory 3,922[ 400] 1,000×100× 80× 95 N/A 4
ç 14360 PR-400 Black 3,922[ 400] 450×150×110×120 HDZ 6
400 ç 14410 PR-401 Ivory 3,922[ 400] 450×150×110×120 HDZ 6 ※ 2 pieces per set,
● Fixing hole diameter(φ10.5 mm)
ç 14390 PR-400L Black 15,691[1,600] 1,800×150×110×120 N/A 1 1 set required per length of PLAROCK.
ç 14110 PR-450P Black 4,413[ 450] 450×205×137×154 HDZ 6 Code No. Item No. Compliant size L W Thickness
450
ç 14100 PR-1800P Black 17,652[1,800] 1,800×205×137×154 N/A 1 ç 14150 PR-P1 400・450 series 120 100 2.3
Specification ● Material … PVC Caution ● Use only within a temperature range of −10º to 50℃ ç 14140 PR-P2 150・350 series 80 60 2.0
49 50
RECYCROCK・ANTI-VIBRATION PAD CATCHER − Universal Condenser Brackets
CR RECYCROCK
lock
Multiple use Support System WALL BRACKET ‒ Separated Type
mo unting b seerrs
s
Versat
ile dens Use For Wall Specification / Material Use For Wall Specification / Material Use For Wall Specification / Material
or con
D Type
ables Portable shape
Code No. ç 18544 Code No. ç 18548 Code No. ç 18549
es, c Powder Hot Dip Hot Dip
with handle
for pip
Diagonal
W2
Item No. C-BFG-L Coating Item No. C-BZFG Galvanized Item No. C-BZFG-L Galvanized
CR-W A/C W Free A/C W Free A/C W Free
ype
3/8 Rail T
Image※3
H
applicable size D 140∼440 applicable size D 100∼330 applicable size D 140∼440
Eco-friendly
23
5 Eco-friendly Min. lot 6 Min. lot 6 Min. lot 6
21
‒‒ uses
uses recycled
recycled materials
materials
W1 L
35 Capacity Capacity Capacity
Specification ● Material … Exterior : Recycled resin(PP, PE)/ Interior : Eco-concrete / Rubber sheet : Recycled rubber
With non-skid rubber sheet ● Temperature range … −10℃∼50℃ ● Color … Black
Unit:mm
※3 … Metal rail is not attached. CR-D RECYCROCK ‒ D Type
Code No. Item No. Rubber sheet Dimension L×W1×W2×H (mm) Weight Pcs/Pkg
Hunger Rail Type ç 14780 CR-D0715 ○ 150×120×110× 70 1.4kg 12
Straight ç 14781 CR-D0730 ○ 300×120×110× 70 2.8kg 6
W2
ç 14785 CR-D1015 ○ 150×120×110×100 2.3kg 8
ç 14786 CR-D1030 ○ 300×120×110×100 4.6kg 4
H
Image※3 ç 14787 CR-D1045 ○ 450×120×110×100 5.2kg 2
20 Wall anchorage dimensions Wall anchorage dimensions
11
ç 14788 CR-D1060 ○ 300×120×110×100 5.8kg 2 Wall anchorage dimensions
Free Free Free
● GPC can easily be aligned and stacked in layers to improve vibration Wall anchorage dimensions Wall anchorage dimensions Wall anchorage dimensions
Hang Hang Hang
absorption. vertical bar vertical bar vertical bar
from the front. from the front. from the front.
Specification ● Materials … NR+SBR
Meter module Meter module
Unit:mm Caution ● Do not apply this product directly to any PVC floor material
as plasticizer ingredient may cause discoloration.
SLOPED ROOF BRACKET
Code No. Item No. Width(W) Length(L) Thickness(t) Pcs/Pkg
ç 06880 GPC-100-10 100 1000 10 20
ç 06250
ç 06220
GPC-100-12
GPC-150-10
100
150
1200
1000
10
10
20
10 GP GP ANTI-VIBRATION PAD Use
Code No.
For Sloped Roof
ç 18502
Use
Code No.
For Sloped Roof
ç 18503
Use
Code No.
For Sloped Roof
ç 18540
Use
Code No.
For Sloped Roof
ç 18541
ç 06230 GPC-300-03 300 300 10 20 Item No. C-YG Item No. C-YUG Item No. C-YUG-L Item No. C-YUZG-L
Dimensions
ç 06240 GPC-100T15-10 100 1000 15 10 Specification / Material ZAM+Powder Coating Specification / Material ZAM+Powder Coating Specification / Material ZAM+Powder Coating Specification / Material Hot Dip Galvanized
A/C W 300∼700 A/C W 100∼700 A/C W 100∼700 A/C W 100∼700
GPS GPS ANTI-VIBRATION PAD t
W
L
applicable size
Min. lot
D 180∼330
4
applicable size
Min. lot
D 160∼340
4
applicable size
Min. lot
D 160∼400
4
applicable size
Min. lot
D 160∼400
4
transmission. Frame
Code No. Item No. Width(W) Length(L) Thickness(t) Hole diameter(㎜) Pcs/Pkg ● Surface embossed cut lines at 50mm intervals
ç 06980 GPS-50-50 50 50 240 facilitate cutting to size.
● Unique design opposes grids and ensures that vibration Can be adjusted for
mild slope(0°∼17° )
ç 06990 GPS-80-80 80 80 10 φ13 120 absorption is not compromised even under heavy loads. by assembling the
frame upside down.
Frame
● GP can easily be stacked in layers to improve vibration Pile up this with
ç 07000 GPS-100-100 100 100 60
(AT level)
SLAB STAND
Use For Flats Use For Flats Use For Flats Use For Flats
Code No. ç 18516 Code No. ç 18518 Code No. ç 18521 Code No. ç 18523
Item No. C-NG Item No. C-NG-L Item No. C-NG5 Item No. C-NG5-L
Specification / Material ZAM+Powder Coating Specification / Material ZAM+Powder Coating Specification / Material ZAM+Powder Coating Specification / Material ZAM+Powder Coating
A/C W 300∼700 A/C W 400∼800 A/C W 300∼700 A/C W 400∼800
applicable size D 160∼340 applicable size D 200∼380 applicable size D 160∼340 applicable size D 200∼380
Min. lot 3 Min. lot 2 Min. lot 3 Min. lot 2
H300mm H300mm H500mm H500mm
Capacity Frame clips together Capacity Frame clips together Capacity Frame clips together Capacity Frame clips together
for easy assembly for easy assembly for easy assembly for easy assembly
355
pitch
(
Level ∼ 2.3/10)
(Level ∼ 2.1/10) (Level ∼ 1.9/10) Level
Level Level
677
Level Level
405
405
450
Floor anchorage
Floor anchorage
dimensions
dimensions
Ceiling anchor and Ceiling anchor and
bolt are not included. bolt are not included.
Capacity
Height
Capacity Capacity Capacity
300mm
Pitch of roof
● Quality, technical information, & packing details in the catalogue are subject to change without notice.
● Unless otherwise specified, all products in this catalog are according to JIS standards or our own manufacturing standards.
● These products are warranted against any defects in workmanship and material. The sole liability of Inaba Denki Sangyo under
this warranty is limited to the repair or replacement of defective products, at the sole discretion of Inaba Denki Sangyo.
199∼365
294
during storage nor transportation. Inaba Denki Sangyo shall not be liable for any loss or damage either direct or consequential
66
2
Anti vibration base available Anti vibration base available Anti vibration base available Inaba Denki Sangyo and at the customer's risk.