Professional Documents
Culture Documents
A combination of chemically resistant epoxy-polyamide resin and rust inhibitive pigments. It is highly
recommended as a protective primer in extremely corrosive atmosphere
Product Description
Main Feature
Specification
Appearance : Flat
Shelf Life : One year when stored in dry and cool conditions.
Application
Mixing Direction : Mix as supplied in the ratio of 3 parts by volume DAVIES Epoxy
Primer Base to 1 part by volume DAVIES Epoxy Primer
Catalyst. Allow 10 minutes induction time before application.
PAINTING SYSTEM
Metal, Ferrous
Wood
Wipe the metal surface with rag soaked in paint thinner to remove dust, dirt, grease, oil, wax and other
foreign matter. For new G.I. sheets, etch the surface by applying 10% BOYSEN ® Metal Etching
Solution #71 (dilute 1 part of B-71 to 9 parts water).
If repainting, wire brush or scrape rusted metals and apply BOYSEN ® Metal Etching Solution #71 to
remove all rust. Let it stay for 10-15 minutes. Be sure to wash off surface thoroughly with water, letting
it dry before applying paint. Prime immediately after drying.
PAINTING SCHEDULE:
Wood - Surface to be painted should be clean and dry, free from dust, dirt and other foreign matter.
Hammer all nails deep enough to apply putty. Sand rough wood until smooth, then dust off before
painting.
If repainting, first remove all blistering, peeling and scaling paint by wire brushing or BOYSEN ® Paint
and Varnish Remover #141. Clean thoroughly prior to painting.
Metal - Wipe the surface with rag soaked in paint thinner to remove dust, dirt, grease, oil, wax and
other foreign matter. For new G.I. sheets, etch the surface by applying 10% BOYSEN ® Metal Etching
Solution #71 (dilute 1 part of B-71 to 9 parts water).
If repainting, wire brush or scrape rusted metals and apply BOYSEN ® Metal Etching Solution #71 to
remove all rust. Let it stay for 10-15 minutes. Be sure to wash off surface thoroughly with water, letting it
dry before applying paint. Prime immediately after drying.
PAINTING SCHEDULE:
WOOD
1st Coat: BOYSEN® Flatwall Enamel #800
Putty: BOYSEN® Plasolux Glazing Putty #311
2nd & 3rd Coat: BOYSEN® Quick Dry Enamel (any desired color)
METAL
1st coat: BOYSEN® Red Oxide Primer #310,
BOYSEN® Rust Off™ Primer Gray #330,
or BOYSEN® Primeguard™ #4310
2nd & 3rd Coat: BOYSEN® Quick Dry Enamel (any desired color)
BOYSEN® Permacoat™ Latex
DESCRIPTION: BOYSEN® Permacoat™ Latex Paint
is a 100% acrylic latex paint with excellent hiding,
durability and dirt pick-up resistance. It finishes
painting jobs in less coats, yet lasts longer than
other brands allowing you to save a lot on time,
effort, worry and money.
SURFACE PREPARATION:
PAINTING SCHEDULE:
Putty:
BOYSEN® Masonry Putty #7311 (interior use)
BOYSEN® Acrytex Cast™ #1711 (exterior use)
2nd & 3rd Coat: BOYSEN® Permacoat™ Flat Latex (any desired color)
BOYSEN® Permacoat™ Latex Paint
BOYSEN® Permacoat™ is a 100% acrylic latex paint
with excellent hiding, durability and dirt pick – up
resistance. It finishes painting jobs in less coats, yet
lasts longer than other brands allowing you to save a
lot on time, effort, worry and money.
SURFACE PRAPARATION:
1. Remove all loose, scaling, flaking, and peeling off paint by wire brushing, scraping, or rough sanding.
2. When necessary, use BOYSEN® Paint and Varnish Remover #141 but make sure that residue is completely
washed off from the surface to prevent adverse reactions with succeeding coats. Let it dry.
4. For chalking old latex paint, apply one (1) coats of BOYSEN® Chalk Blocker #7304. Let dry overnight.
5. In case of mildew infestation, treat affected areas with a fungicidal wash solution or household bleach mixed
with water (1:3, respectively). Let the treatment stay overnight before wiping off residue with damp cloth. Let
dry.
PAINT APPLICATION:
1. Prime bare substrate with BOYSEN® Permacoat™ Latex Flat #701. Let dry for one (1) hour.
2. Putty minor surface imperfections with BOYSEN® Acrytex™ Cast #1711. Let dry for one (1) hour. Spot prime
puttied portions.
3. Spray BOYSEN® Acrytex™ Cast #1711 by mortar gun for texture. Let dry for one (1) hour. Spot prime
puttied and textured portions.
4. Finish with two (2) coats of BOYSEN® Permacoat™ Latex* to your desired premixed shade. Let dry for one
(1) hour in between coats.
AVAILABLE COLORS:
B3303 Thalo Green
B3314 Raw Sienna
B3306 Thalo Blue
B3317 Venetian Red
B3315 High Performance Red
B3318 Lampblack
B3319 High Performance Yellow
BOYSEN® Masonry
Neutralizer #44
DESCRIPTION: BOYSEN® Masonry
Neutralizer #44 is a liquid acidic
substance that is to be mixed with water
to neutralize lime activity in new
masonry surfaces.
COVERAGE: 20 sq.m./gallon of
mixture
APPLICATION: paint brush or roller
PAINTING SCHEDULE:
Caution: Adequate protection and ventilation should be provided when working with acids.