Professional Documents
Culture Documents
SOP-Anemometer Operation
SOP-Anemometer Operation
1.0 Purpose:
To give guide lines for usage of anemometer.
2.0 Scope:
Applies to anemometer
3.0 Responsibility:
HOS Operation and Process Engineer, is responsible for implementation of this SOP.
4.0 Procedure
Note: Anemometer is used for forced draft system where inlet is open to atmosphere for air
suction.
Switch on the anemometer and check the wheel is moving freely by gently blowing the
air
Keep the anemometer in front of the flow source i.e. fan inlet over the mesh.
Note the measured reading by keeping the anemometer fan at different position in the ducts.
EnMS;