Professional Documents
Culture Documents
D Water
Jaguar® C-162 Conditioning Agent 0.10%
Hydroxypropyl Guar Hydroxypropyltrimonium Chloride
F Water
Sodium Benzoate Preservative 0.45%*
Procedure
I Sprinkle Carbopol on the surface of the water. When fully hydrated, stir for 30 min (50
rpm).
II Add phase B to A and stir until solubilised (100 rpm).
III In a separate beaker, combine ingredients of phase C and stir until clear (100 rpm) Add to
mix.
IV Add the remaining phases (D, F, G) in the above order while stirring (100 rpm)
V Adjust pH to 5- 5,5 with phase E while stirring (100 rpm)
VI Adjust viscosity with phase I while stirring slowly (50 rpm)
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not
therefore be construed as guaranteeing specific properties of the product described or their suitability for a particular application. Any existing industrial
property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
Results
pH: 5.30 Appearance: white shampoo
Viscosity (Brookfield, 20°C 20 rpm): 5700 mPas Stability: 12 weeks at RT and 40°C
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not
therefore be construed as guaranteeing specific properties of the product described or their suitability for a particular application. Any existing industrial
property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.