Professional Documents
Culture Documents
CORRECTION
Correction: Evaluation of the efficiencies of helical anchor
plates in sand by centrifuge model tests
C.H.C. Tsuha, N. Aoki, G. Rault, L. Thorel, and J. Garnier
Replace Fig. 5 with the figure shown herein, where the unit shown in the label on the vertical axis “N/m” has been replaced with the
correct unit “N/mm”, and an open triangle has been replaced with a solid triangle.
Fig. 5. Initial slope of loading curve versus number of helices. Dhelix, helix diameter.
For personal use only.
‡Present address: Laboratoire GMG, Département GERS, IFSTTAR, Université Gustave Eiffel, Nantes Campus, Allée des Ponts et Chaussées, F-44344,
Bouguenais, France.
§Retired.
Copyright remains with the author(s) or their institution(s). Permission for reuse (free in most cases) can be obtained from RightsLink.