Professional Documents
Culture Documents
BRAND HYDRAULICS - Flow Control Valve Spinner HAwk PDF
BRAND HYDRAULICS - Flow Control Valve Spinner HAwk PDF
INLET (IN)
FC55
CONTROLLED
FLOW (CF)
EXCESS
FLOW (EX)
FCB51-3/4
FCR51-3/4
INLET (IN)
FCR51
CONTROLLED EXCESS
FLOW (CF) FLOW (EX)
INLET
(IN)
FEATURES:
• DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage.
• EVERY FC IS TESTED for shutoff, max. flow, and pressure compensation.
• STANDARD 3-PORT allows for pressure compensated flow out of two ports.
• STANDARD 416 STAINLESS STEEL side lever spool to prevent the spool from locking up.
• STANDARD SAE ORB COMPENSATOR PLUGS to eliminate external leakage from the
compensator bore.
• EXTERNAL SEALS ON ROTARY SPOOL prevents contamination from locking up spool.
• OPTIONAL TOP PORT allows the customer to plumb their pipe directly in line with the inlet.
• OPTIONAL 2-PORT allows for pressure compensated flow out of one port.
• OPTIONAL 316 STAINLESS STEEL rotary spool provides highest corrosion resistance.
• OPTIONAL FREE REVERSE FLOW allows fluid to move from the CF (control flow) and EX
(excess flow) port to the inlet. (Single reverse flow is also available)
• OPTIONAL ADJUSTABLE BALL SPRING RELIEF AND HIGH LIFT BALL SPRING RELIEF
CF (control flow) port.
SPECIFICATIONS: MATERIALS:
• See flow chart for capacity. • Cast Iron Body.
• Rated for 3000 psi (207 bar). • Heat Treated Compensator Spool.
• Weighs 7- ¾ lbs. (3.52 kg). • Stainless Steel Rotary Spool.
• 30-Micron Filtration Recommended. • Buna N O’Rings (Standard)
• Heat Treated Free Reverse Check Seat.
PORT SIZE:
3/8 – 3/8” NPT (0-8 gpm standard) 2 OR 3 PORT:
1/2 – 1/2” NPT (0-16 gpm standard) 2P – 2 port
3/4 – 3/4” NPT (0-30 gpm standard) Omit – 3 port (Standard)
6 - #6SAE (9/16 – 18) (0-8 gpm standard) TP – Top ported
8 - #8SAE (3/4 – 16) (0-8 gpm standard)
10 - #10SAE (7/8 – 14) (0-16 gpm standard)
12 - #12SAE (1-1/16 – 12) (0-30 gpm standard)
Page B-2
Flow Control Valves
Controlled Flow vs. Dial Plate for FC Series Pressure Drop vs. Flow for FC Series
32 200
FC51-3/4
Excess Flow
28
24 150
FC51-1/2
16 100
12
FC51-3/8
8 50
0 0
0 1 2 3 4 5 6 7 8 9 10 0 4 8 12 16 20 24 28 32 36 40 44
Dial Plate Number (0-10) Flow (gpm)
Pressure vs. Flow for FCR51 Pressure vs. Flow for FCB51
3500
2500 TS324 Spring
Pressure (psi)
1500 2000
1500
1000
TS323 Spring
1000
500
500
0 0
0 3 6 9 12 15 18 21 24 27 30 0 5 10 15 20 25 30
CF relief is set at 6 gpm Flow (gpm) CF relief is set at 6 gpm Flow (gpm)
Page B-3
Flow Control Valves
DIMENSIONAL DATA:
3.87"
2.28 REF 29/32
11/32 REF
Ø17/64 THRU
6
2.13" .88
D
=O
(2 PLACES)
MA
8
H A , NE
9 10
IN
1.75" 0.145"
2.88"
FCR51 AND FC51 DIMENSIONAL DATA (FCR51 SHOWN):
3.87"
2.28" 29/32 REF.
11/32 REF
(2 PLACES)
6
2.13" .88
D
=O
7
MA
8
H A , NE
9 10
IN
4.56"
Page B-4