Professional Documents
Culture Documents
Construction of Office Block at IIT Kanpur Outreach Centre NOIDA (SH: Air-conditioning Works).
Section -A
Name of Firm
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
1.0 EQUIPMENT
NOTES:
The above mentioned outdoor units shall be provided with anti corrosion
treatment ( from factory). The quoted price shall be inclusive of same.
Page 1 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
1.3 CUSTOMISED VRF INDOOR UNITS
VERTICAL FLOOR MOUNTED AHU (FOR GROUND FLOOR)
The unit shall be supplied with electronic expansion valve/s (Dx), thermostat/s,
control wiring & all accessories as required for completing the installation. The
price shall be inclusive of these items. Fan outlet velocity shall not exceed 2000
FPM (10.2 MPS). AHUs shall be of following design parameters:
Page 2 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
1.6 COPPER PIPING (REFRIGERANT PIPING)
1.7 FITTINGS
1.9
CENTRALIZED REMOTE CONTROLLER (TOUCH SCREEN TYPE)
Central remote Controller (Touch Screen Type) : Supply, installation,
testing & commissioning of the Graphic central remote Controller. It must
act as an advanced air conditioning management system to
facilitate complete control of VRF air conditioning equipment, It should be
user friendly through its touch screen, icon display and color LCD display.
Integratable upto 64 remote controller groups (including AHUs & TFAs)
and BMS compatible with ethernet/Wi-Fi communication protocol for
remote monitoring. In addition to basic controls such as settings for No 1 0.00
on/stop,the operation mode & temperature,the air quantity and auto louver
can be set.If a problem occurs, an alarm code immediately shows the
details of the problem.An external input terminal is provided as
standard.External signals enable the following function: central
operation/stop,demand control,emergency stop,central operation output,&
central alarm output.
Page 3 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
2.1 Ductwork
2.2 Supply, Installation and Testing of 125mm deep Antivibration Flexible Joints
made out of imported fire retardant fabric with extruded aluminium frame/
flange on both sides of approved make. RM 10 0
2.3 Supply, Installation and Testing of multi blade type key operated louver
dampers of galvanised steel sheet for collars to be provided with suitable
links, levers and quadrants for manual control of volume of air flow and for
proper balancing of the air distribution system as per the approved shop
drawings and specifications. SqM 5 0
2.4 Supply, Installation and Testing of multiblade box type galvanised steel
sheet dampers for ducts to be provided with suitable links, levers and
quadrants for manual control of volume of air flow and for proper
balancing of the air distribution system as per the approved shop drawings
and specifications. SqM 2 0
2.5 Supply, Installation, Testing & Commissioning of smoke cum fire dampers of at
least 90-120 minutes fire rating as per the approved shop drawings &
specifications. Interlocking of fire dampers using copper control wiring and
requisite relays with existing AHU starter panel shall be affected as required.
b. Actuator with control panel, temperature sensor and spring return action
and suitable for 10-12 NM Torque. No 5 0
Page 4 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
2.6 Supply, Installation, Testing & Balancing of square supply air diffusers as per the
approved shop drawings and specifications with fixed air distribution grid,
a. 600 x 600 diffusers with volume control damper having neck size as mentioned
in the "Approved for Construction" shop drawings suitable for fixing in gypsum No. 15 0
ceiling.
b. 300 x 300 diffusers with volume control dampers having neck size as
mentioned in the "Approved for Construction" shop drawings suitable for fixing No. 5 0
in gypsum ceiling.
2.7 Supply, Installation, Testing & Balancing of square diffusers same as supply air
diffusers but without volume control dampers for return air as per the
approved shop drawings & specifications.
a. 150mm dia RM 20 0
b. 100mm dia RM 140 0
2.9 Supply, Installation, Testing and Balancing of one way blow linear supply cum
return air grilles complete with removable inner core as per approved shop
drawing and specifications. The grilles shall be of approved colour & shade.
2.10 Supply, Installation and Testing of extruded aluminium powder Coated air trasfer
grilles to be provided at the doors.
SqM 1.5 0
2.11 Supply, Installation and Testing of fresh air grilles of powder coated /anodised
extruded aluminium with filters, inlet louvers dampers and bird screen, as per
approved shop drawings and specifications.
SqM 1 0
a. 150mm dia No 10 0
b. 100mm dia No 45 0
Page 5 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
Page 6 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
3.0 INSULATION
3.2 Supply and installation of aluminium foil faced closed cell elastomeric nitrile
rubber thermal insulation exhibiting class"O" properties on supply and return air
ducts with sealing of longitugnal and transverse joints with SR-505 adhesive as
per the approved specifications. Quoted price shall be inclusive of adhesive,
tapes as per specification.
3.3 Supply and Application of thermal/acoustic lining of walls & ceiling of AHU
enclosure or insode ducts using fibreglass board having density not less than 80
Kg/CuM, laminated with aluminium foil on one side and three layers of black
glass cloth on the other side.
Page 7 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
4.3 EARTHING
Providing & fixing in position the following bare GI tape/ Cu wire including
Page 8 of 10
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
SECTION : B - ANNUAL MAINTENANCE CONTRACT
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
Page 9 of 10
IIT KANPUR EXT AT NOIDA SCHEDULE OF QUANTITIES
1. EQUIPMENT 0.00
2 AIR DISTRIBUTION 0.00
3 INSULATION 0.00
4 ELECTRICAL 0.00
1. SECTION - A 0.00
2 SECTION - B 0.00
126