Professional Documents
Culture Documents
CONSTRUCTION
DIVISION
ANCHOR TECHNOLOGY PRODUCT CATALOGUE
1994-2019
25
YEARS
WÜRTH INSIGHT
WUERTH INDIA
Jammu &
Kashmir
Himachal Pradesh
Chandigarh
Punjab Uttarakhand
Haryana
Arunachal Pradesh
Delhi
Sikkim
Maharashtra
Telangana
Karnataka
Andhra Pradesh
Tamil Nadu
Andaman & Nicobar Islands
Our product range includes products for Automotive Technology/Service Maintenance, Chemicals,
Paints, Engine Oils, Adhesives/Abrasives, Cutting Devices, Fasteners, Furniture and Construction Fittings,
Dowel Technology, Industrial Safety and much more.
Business Areas
MECHANICAL ANCHORS
Fixanchor W-FAZ/S 2
Fixanchor W-FAZ/A4 5
Fixanchor W-FA/S/F 9
Fixanchor W-FA/A4/HCR 13
Drop-in Anchor W-ED/S 17
Drop-in Anchor W-ED/A4 20
High Performance Anchor W-HAZ/S 23
High Performance Anchor W-HAZ/A4 28
Concrete Screw W-BS/S/A4 32
CHEMICAL ANCHORS
Injection System WIT-VM 250 39
Injection System WIT-PE 500 46
Injection System WIT-EA 200 53
Threaded rods 56
Cleaning Accessories 57
CHEMICALS
PURLOGIC TOP 64
FIX ANCHOR
W-FAZ
W-FAZ/S (M8 - M27)
Applications
1
W-FAZ/S
FIXANCHOR W-FAZ/S Approved for:
Concrete C20/25 to C50/60
Benefits:
• All the many approvals guarantee it’s
reliable function for all applications even in
cracked and non-cracked concrete.
• The optimized unit of cone bolt and expansion
sleeve avoids concrete spalling at smallest edge
distances too.
• The length identifier on the front end of the bolt
Machine Setting Tool facilitates the inspection of correct installation.
Art. No. 0904 908 016 • The multitude of types offers the most economic
anchor for all applications in any case. In
particular the one with the big washer is mainly
used in timber construction.
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Metal structures, metal profiles, brackets, foot plates, supports, cable Cracked concrete
conduits, piping, railings, wooden structures, beams. Non-cracked concrete
Recommended loads
Thread size M M8 M8 M10 M10 M12 M12 M16 M16 M20 M24 M27
Effective anchorage depth hef [mm] 35 46 40 60 50 70 65 85 100 115 125
Non-cracked concrete
Tensile C20/25 Nrec [kN] 3.6 5.7 4.3 7.6 8.5 11.9 12.6 16.7 24.0 29.7 33.6
C50/60 Nrec [kN] 5.5 7.5 6.6 11.8 13.2 18.5 19.5 25.8 37.3 46.0 52.1
Shear ≥ C20/25 Vrec [kN] 7.0 7.0 11.5 11.5 17.1 17.1 30.2 34.3 37.1 65.1 94.1
Cracked concrete
Tensile C20/25 Nrec [kN] 2.4 2.4 3.6 4.3 6.1 7.6 9.0 11.9 17.2 21.2 24.0
C50/60 Nrec [kN] 3.7 3.7 5.5 6.6 9.4 11.8 14.0 18.5 26.6 32.8 37.2
Shear ≥ C20/25 Vrec [kN] 7.0 7.0 10.4 11.5 14.5 17.1 21.6 31.4 37.1 59.2 67.1
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
2
W-FAZ/S
FIXANCHOR W-FAZ/S
Anchor characteristics
Thread size M M8 M8 M10 M10 M12 M12 M16 M16 M20 M24 M27
Min. thickness of concrete member hmin [mm] 80 100 80 120 100 140 140 170 200 230 250
Non-cracked concrete
for c> [mm] 60 80 100 70 160 120 170 120 180 180 300
Minimum edge distances cmin [mm] 40 50 65 50 100 75 170 80 130 100 180
for s> [mm] 185 100 180 100 185 150 65 150 240 220 540
Cracked concrete
for c> [mm] 60 70 100 70 160 100 170 100 150 180 300
for s> [mm] 185 80 180 90 250 140 250 180 200 220 540
3
W-FAZ/S
4
/ HCR
Non-cracked concrete
Recommended loads
Thread size M M8 M8 M10 M10 M12 M12 M16 M16 M20 M24
Effective anchorage depth hef [mm] 35 46 40 60 50 70 65 85 100 125
Non-cracked concrete
Tensile C20/25 Nrec [kN] 3.6 5.7 4.3 7.6 8.5 11.9 12.6 16.7 24.0 33.6
C50/60 Nrec [kN] 5.5 7.6 6.6 11.8 13.2 18.5 19.5 25.8 37.3 52.1
Shear ≥ C20/25 Vrec [kN] 7.4 7.4 11.4 11.4 17.1 17.1 30.2 34.3 46.2 70.6
Cracked concrete
Tensile C20/25 Nrec [kN] 2.4 2.4 3.6 4.3 6.1 7.6 9.0 11.9 17.1 19.1
C50/60 Nrec [kN] 3.7 3.7 5.5 6.6 9.4 11.8 14.0 18.5 26.6 37.1
Shear ≥ C20/25 Vrec [kN] 7.4 7.4 10.4 11.4 14.6 17.1 21.6 31.4 43.9 67.1
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
5
/ HCR
Anchor characteristics
Thread size M M8 M8 M10 M10 M12 M12 M16 M16 M20 M24
Min. thickness of concrete member hmin [mm] 80 100 100 120 120 140 140 160 200 250
Non-cracked concrete
for c> [mm] 80 70 140 75 120 100 180 100 150 125
for s> [mm] 100 80 140 90 150 140 200 180 200 125
Cracked concrete
for s> [mm] 80 100 115 120 140 150 180 150 240 125
6
/ HCR
7
FIX ANCHOR
W-FA
W-FA/S (M6 - M20)
Applications
8
W-FA/S, W-FA/F
FIXANCHOR W-FA/S, W-FA/F
W-FA/S Approved for:
Concrete C20/25 to C50/60
Benefits:
•With a few blows the anchor is easy and fast to
W-FA/F install.
•The long thread allows levelling of unevenness and
can be used to assemble stand-off fixations.
• Two approved anchorage depth broaden the
application spectrum.
• Its approval guarantees the safe function even
Machine Setting Tool under highest load requirements.
Art. No. 0904 908 016
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Suitable for Non-cracked concrete
Metal structures, metal profiles, brackets, foot plates, supports,
cable conduits, piping, wooden structures, beams, purlins
Recommended loads
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
9
W-FA/S, W-FA/F
FIXANCHOR W-FA/S, W-FA/F
Anchor characteristics
10
W-FA/S, W-FA/F
Min. drill
Article description Art. No. Drill dia. Anchor Fixture Thread Wrench PU
hole depth
Length thickness Size size
for through
fastening
do h2 l tfix/tfix,red ØxlG SW
mm mm mm mm mm Qty.
11
W-FA/S, W-FA/F
12
W-FA/A4, W-FA
FIXANCHOR W-FA/A4, W-FA/HCR Approved for:
Concrete C20/25 to C50/60
W-FA/A4
Benefits:
• With a few blows the anchor is easy and fast to
install.
• The long thread allows levelling of unevenness and
can be used to assemble stand-off fixations.
W-FA/HCR • Two approved anchorage depth broaden the
application spectrum.
• Its approval guarantees safe function even under
highest load requirements.
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized
Type of fastening Through fastening
Suitable for Non-cracked concrete
Craked with
redundant fastening
Recommended loads
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
M
Installation:
13
W-FA/A4, W-FA
FIXANCHOR W-FA/A4, W-FA/HCR
Anchor characteristics
14
W-FA/A4, W-FA/HCR
Art. No. Drill dia. Min. drill Anchor Fixture Thread Wrench PU
Article description hole depth Length thickness Size size
for through
fastening
do h2 l tfix/tfix,red ØxlG SW
mm mm mm mm mm Qty.
15
DROP-IN ANCHOR
W-ED
W-ED/S (M6 - M20)
Applications
16
W-ED/S
DROP-IN ANCHOR W-ED/S
Approved for:
W-ED/S Concrete C20/25 to C50/60
Benefits:
• Easy installation due to low drive-in energy
• Visual setting check and hand protection when
installing with markingspreading tool Can be loaded
immediately – no waiting time.
W-ED/S-BND
• Attachment can easily be demounted at any time.
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Pre fastening
Suitable for Non-cracked concrete
Cracked with redundant
fastening
Can be used for hollow
core slab
Attaching threaded rods, metal structures, metal profiles, grids, cable conduits,
pipelines, mounting rails
Suitable for hollow core slabs
Recommended loads
Non-cracked concrete
Tensile C20/25 Nrec [kN] 3.3 3.3 5.1 3.3 5.1 7.1 10.5 14.3
C50/60 Nrec [kN] 4.8 5.1 7.9 5.1 7.9 11.0 16.3 22.2
Shear ≥ C20/25 Vrec [kN] 2.9 3.9 3.9 4.0 4.1 11.1 18.0 28.6
* in conjunction with a bolt of strength grade 5.8
Installation:
17
W-ED/S
Anchor characteristics
Min. thickness of concrete member hmin [mm] 100 100 100 120 120 130 160 200
Non-cracked concrete
Minimum edge distances cmin [mm] 95 95 95 115 135 165 200 260
18
W-ED/S
19
W-ED/A4
DROP-IN ANCHOR W-ED/A4, W-ED/HCR Approved for:
Concrete C20/25 to C50/60
Benefits:
• Easy installation due to low drive-in energy.
• Visual setting check and hand protection when
installing with markingspreading tool Can be loaded
immediately – no waiting time.
• Attachment can easily be demounted at any time.
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, outdoor
Material composition A4 stainless steel / HCR
highly corrosion-resistant steel
Type of fastening Pre fastening
Attaching threaded rods, metal structures, metal Suitable for Non-cracked concrete
profiles, grids, cable conduits, pipelines, mounting Cracked with
rails redundant fastening
Recommended loads
Non-cracked concrete
Tensile C20/25 Nrec [kN] 3.3 3.3 5.1 3.3 5.1 7.1 10.5 14.3
C50/60 Nrec [kN] 4.8 5.1 7.9 5.1 7.9 11.0 16.3 22.2
Shear ≥ C20/25 Vrec [kN] 2.9 3.9 3.9 4.0 4.1 11.1 18.0 28.6
* in conjunction with a bolt of strength grade 5.8
Installation:
20
W-ED/A4
21
HIGH PERFORMANCE ANCHOR
W-HAZ
W-HAZ/S (M6 - M20)
Applications
22
W-HAZ/S
HIGH-PERFORMANCE ANCHOR W-HAZ/S Approved for:
Concrete C20/25 to C50/60
W-HAZ-B
Benefits:
• The bolt is attuned to the sleeve to make this anchor a
reliable specialist for highest shear load demands.
• Various head types allow tidy finishes and avoid risk
W-HAZ-S of injury when using for machine bases.
• The optimized combination of expansion sleeve and
cone bolt allow smallest spacing and thus small
cost-efficient anchor plates.
W-HAZ-SK
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Suitable for Cracked concrete
Suitable for fastening metal constructions, metal profit Non-cracked concrete
less, brackets, foot plates, supports, cable conduits, pipes,
railings, machines, etc.
Recommended loads
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
23
W-HAZ/S
HIGH-PERFORMANCE ANCHOR W-HAZ/S
Anchor characteristics
24
W-HAZ/S
Min. drill
Article description Art. No. Drill dia. hole depth Anchor Fixture Wrench PU
for through Length thickness Size
fastening
do h2 l tfix SW
mm mm mm mm Qty.
W-HAZ-B/S-0-M6x67 0905 210 101 10 65 67 0 10 100
W-HAZ-B/S-10-M6x77 0905 210 102 10 75 77 10 10 50
W-HAZ-B/S-30-M6x97 0905 210 103 10 95 97 30 10 50
W-HAZ-B/S-50-M6x117 0905 210 104 10 115 117 50 10 50
W-HAZ-B/S-100-M6x167 0905 210 105 10 165 167 100 10 25
W-HAZ-B/S-0-M8x80 0905 212 101 12 80 80 0 13 50
W-HAZ-B/S-10-M8x90 0905 212 102 12 90 90 10 13 50
W-HAZ-B/S-30-M8x110 0905 212 103 12 110 110 30 13 50
W-HAZ-B/S-50-M8x130 0905 212 104 12 130 130 50 13 25
W-HAZ-B/S-100-M8x180 0905 212 105 12 180 180 100 13 25
W-HAZ-B/S-0-M10x96 0905 215 101 15 95 96 0 17 25
W-HAZ-B/S-15-M10x111 0905 215 102 15 110 111 15 17 25
W-HAZ-B/S-25-M10x121 0905 215 103 15 120 121 25 17 25
W-HAZ-B/S-45-M10x141 0905 215 104 15 140 141 45 17 25
W-HAZ-B/S-95-M10x191 0905 215 105 15 190 191 95 17 25
W-HAZ-B/S-0-M12x112 0905 218 101 18 105 112 0 19 20
W-HAZ-B/S-10-M12x122 0905 218 102 18 115 122 10 19 20
W-HAZ-B/S-20-M12x132 0905 218 103 18 125 132 20 19 20
W-HAZ-B/S-40-M12x152 0905 218 104 18 145 152 40 19 20
W-HAZ-B/S-70-M12x182 0905 218 105 18 175 182 70 19 20
W-HAZ-B/S-100-M12x212 0905 218 106 18 205 212 100 19 10
W-HAZ-B/S-0-M16x137 0905 224 101 24 130 137 0 24 10
W-HAZ-B/S-20-M16x157 0905 224 102 24 115 157 20 24 10
W-HAZ-B/S-50-M16x187 0905 224 103 24 180 187 50 24 10
W-HAZ-B/S-100-M16x237 0905 224 104 24 230 237 100 24 5
W-HAZ-B/S-0-M16Lx152 0905 224 111 24 145 152 0 24 10
W-HAZ-B/S-30-M16Lx182 0905 224 113 24 175 182 30 24 10
W-HAZ-B/S-50-M16Lx202 0905 224 115 24 195 202 50 24 10
W-HAZ-B/S-10-M20x181 0905 228 101 28 170 181 10 30 10
W-HAZ-B/S-30-M20x201 0905 228 102 28 190 201 30 30 10
W-HAZ-B/S-60-M20x231 0905 228 103 28 220 231 60 30 5
W-HAZ-B/S-100-M20x271 0905 228 104 28 260 271 100 30 5
25
W-HAZ/S
Article description Drill dia. Min. drill
Art. No. Anchor Fixture Wrench PU
hole depth
Length thick- Size
for through
ness
fastening
do h2 l tfix SW
mm mm mm mm Qty.
26
W-HAZ/S
Min. drill Anchor Fixture Wrench
Article description Art. No. Drill dia. PU
hole depth Length thickness Size
for through
fastening
do h2 l tfix SW
mm mm mm mm Qty.
27
W-HAZ/A4
HIGH-PERFORMANCE ANCHOR W-HAZ/A4
Approved for:
W-HAZ-B/A4 Concrete C20/25 to C50/60
Benefits:
• The bolt is attuned to the sleeve to make this anchor a
W-HAZ-S/A4 reliable specialist for highest shear load demands.
• Various head types allow tidy finishes and avoid risk
of injury when using for machine bases.
• The optimized combination of expansion sleeve and
cone bolt allow smallest spacing and thus small cost
efficient anchor plates.
W-HAZ-SK/A4
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, Outdoor
Material composition A4 stainless steel
Type of fastening Through-fastening
Suitable for Cracked concrete
Non-cracked concrete
Metal constructions, metal profiles, brackets, foot plates, supports, cable
conduits, pipes, railings, machines, etc.
Recommended loads
Thread size 12/M8 15/M10 18/M12 24/M16
Effective anchorage depth hef [mm] 60 71 80 100
Non-cracked concrete
Tensile C20/25 Nrec [kN] 7.6 11.9 16.7 24.0
B 11.8 18.5 25.8 37.3
C50/60 Nrec [kN]
S and K 9.9 15.7 22.9 37.3
B 13.7 21.1 34.4 48.1
Shear ≥ C20/25 Vrec [kN]
S and K 12.6 19.4 32.6 48.1
Cracked concrete
Tensile C20/25 Nrec [kN] 4.3 7.6 12.3 17.1
C50/60 Nrec [kN] 6.6 11.8 19.1 26.6
B 13.7 20.6 24.6 34.4
Shear ≥ C20/25 Vrec [kN]
S and K 12.6 19.4 24.6 34.4
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
28
W-HAZ/A4
Anchor characteristics
29
W-HAZ/A4
do h2 l tfix SW
mm mm mm mm Qty.
W-HAZ-B/A4-10-M8x90 5932 612 102 12 90 90 10 13 50
W-HAZ-B/A4-30-M8x110 5932 612 103 12 110 110 30 13 50
W-HAZ-B/A4-15-M10x111 5932 615 102 15 110 111 15 17 25
W-HAZ-B/A4-25-M10x121 5932 615 103 15 120 121 25 17 25
W-HAZ-B/A4-20-M12x132 5932 618 103 18 125 132 20 19 20
30
CONCRETE SCREW
W-BS
6 - 14
Applications
31
W-BS CONCRETE SCREW
Approved f or:
Concrete C20/25 to C50/60, cracked
Benefits:
••Europ
The fast installation is carried out by simply screwing
into the drill hole.
• A safe function is guaranteed even without using
a torque-controlled wrench.
• When using for temporary anchorages the concrete
screw bolt can be entirely removed.
• Highest load capacities are transferred reliably into
the base material through a form locking mechanism.
• The various types of screw heads develop new areas
Applications: of application, in particular those with fixtures made
of wood.
Suitable for attaching metal structures, metal profiles, brackets, Fire resistance DIBt, Berlin TR 020 ETA1
- 6/0043 / 201 6- 04-04
base plates, supports, cable ducts, pipelines, railings etc.
Recommended loads
Thread size M 6 6 8 8 8 10 10 10 12 12 12 14 14 14
Tensile C20/25 Nrec [kN] 1.9 4.3 3.6 5.7 7.6 5.7 9.5 12.4 7.6 12.8 16.8 10.3 16.4 20.7
C50/60 Nrec [kN] 3.0 6.7 5.6 9.0 12.0 9.0 15.0 19.6 12.0 20.3 26.5 16.3 26.0 32.7
Shear ≥ C20/25 Vrec [kN] 3.3 3.3 4.9 6.4 8.1 6.6 16.2 16.2 8.3 19.0 19.0 10.3 26.7 26.7
Cracked concrete
Tensile C20/25 Nrec [kN] 1.0 1.9 2.4 4.3 5.7 4.3 7.6 9.2 5.7 9.0 11.7 7.2 11.5 14.5
C50/60 Nrec [kN] 1.5 3.0 3.8 6.8 9.0 6.8 12.0 14.5 9.0 14.2 18.5 11.4 18.2 22.9
Shear ≥ C20/25 Vrec [kN] 2.8 3.3 3.4 4.6 6.1 4.6 15.2 16.2 5.8 18.0 19.0 7.2 23.0 26.7
Material Safety factor ɣM and safety factor ɣL = 1.4 are included. The material safety factor depends on the failure mode.
32
W-BS CONCRETE SCREW
Anchor characteristics
Thread size M 6 6 8 8 8 10 10 10 12 12 12 14 14 14
Length of anchor inside drill hole hnom [mm] 40 55 45 55 65 55 75 85 65 85 100 75 100 115
External diameter ds [mm] 7.5 7.5 10.6 10.6 10.6 12.6 12.6 12.6 14.6 14.6 14.6 16.6 16.6 16.6
Core diameter dk [mm] 5.1 5.1 7.1 7.1 7.1 9.1 9.1 9.1 11.1 11.1 11.1 13.1 13.1 13.1
Min. thickness of concrete member hmin [mm] 100 100 100 100 120 100 130 130 120 130 150 130 150 170
33
W-BS CONCRETE SCREW
34
W-BS CONCRETE SCREW
35
W-BS CONCRETE SCREW
36
W-BS CONCRETE SCREW
37
WIT-VM 250
Rebar
(Ø8 - Ø32)
Threaded rod
(M8 - M30)
Applications
38
WIT-VM 250
Approved f or:
Concrete C20/25 to C50/60, cracked
Suitable for:
Concrete C12/15
Benefits:
Benefits:
• Styrene-free, quick curing high-performance vinylester
mortar allows the anchorage to be finished in a short
Threaded rod period of time.
• Its manyapprovals guarantees optimized load
capacities for threaded rods and rebar.
•Universal fixing system fora broad rage of applica-
tions on building sites.
•The special chemical composition allows working in
high corrosion areas.
Applications
39
VM 250 M WITH THREADED ROD (METRIC)
Recommended loads
Anchor characteristics
40
VM 250 M WITH THREADED ROD (METRIC)
41
WIT-VM 250
Approved f or:
Concrete C20/25 to C50/60, cracked
Suitable for:
Concrete C12/15
Benefits:
Benefits:
• Styrene-free, quick curing high-performance vinylester
mortar allows the anchorage to be finished in a short
period of time.
Rebar • Its manyapprovals guarantees optimized load
capacities for threaded rods and rebar.
•Universal fixing system fora broad rage of applica-
tions on building sites.
•The special chemical composition allows working in
high corrosion areas.
Applications
42
WIT-VM 250 WITH REBAR
43
WIT-VM 250 WITH REBAR
g g
44
WIT-PE 500
Rebar
(Ø8 - Ø40)
Threaded rod
(M8 - M39)
Applications
45
WIT-PE 500
Approved f or:
Concrete C20/25 to C50/60, cracked
Suitable for:
Concrete C12/15, Natural stone with dense structure
Benefits:
• The prolonged gelling/working time allows
convenient adjustment at higher temperature and with
large embedment depth.
• Its manyapprovals guarantees optimized load
Threaded rod capacities for threaded rods and rebar.
• Its specially developed chemical composition allows
reliable installation in underwater conditions and
when filled in diamond cored drill holes.
• The low shrinkage of the mortar broadens the
application spectrum in addition for big diameter
fastener elements.
Applications
Recommended loads
Anchor characteristics
47
WIT-PE 500 WITH THREADED ROD (METRIC)
48
WIT-PE 500
Approved f or:
Concrete C20/25 to C50/60, cracked
Suitable for:
Concrete C12/15, Natural stone with dense structure
Benefits:
• The prolonged gelling/working time allows
convenient adjustment at higher temperature and with
large embedment depth.
• It’s manyapprovals guarantees optimized load
capacities for threaded rods and rebar.
Rebar
• It’s specially developed chemical composition allows
reliable installation in underwater conditions and
when filled in diamond cored drill holes.
• The low shrinkage of the mortar broadens the
application spectrum in addition for big diameter
fastener elements.
Applications
49
WIT-PE 500 WITH REBAR
Design loads versus Anchorage Depth
50
WIT-PE 500 WITH REBAR
g g
51
WIT-EA 200
Threaded rod
(M8 - M24)
Applications
52
WIT-EA 200
Threaded rod
53
WIT-EA 200
54
WIT-EA 200
55
THREADED RODS
56
CLEANING ACCESSORIES
57
W-FRA 10
58
W-FRA 10
ETA-17/0348/2017-04-26
59
W-FRA 10
60
61
COUNTERSUNK NYLON HAMMER ANCHOR
62
NYLON FRAME WINDOW ANCHOR
63
PURLOGIC® TOP
1 64
WUERTH INDIA
eShop DOWNLOAD
WUERTH APP
ONLINE PURCHASING MADE EASY
QR Code
REGISTER NOW
@ www.eshop.wuerth.in Follow us on
65
PARTNER FOR CONSTRUCTION DIVISION JULY 2019
25
Central Support Centre: Regional Support Centre:
Mumbai: No 703/704, WINDFALL, Sahar Plaza Complex, Chennai: No. 104, Secretariat Colony 9th Street,
Andheri – Kurla Road, J B Nagar, Andheri (East), Mumbai – 400059 Kilpauk, Chennai – 600010
YEARS
www.wuerth.in
info.wuerth@wuerth.in
Toll Free: 1800 102 5061
Wuerth India eSHOP
Register Now
Follow us on @ www.eshop.wuerth.in WUERTH APP
66