Professional Documents
Culture Documents
Choose your device TEP (a) and click Green Button (b)
and than OK (c)
Load Measurement
a) Choice of Rail Type
To open our measurement please
click on Import data and choose
your device file – Load TEP
measurment.
b
a c
1
3
To see measurment of our Rail Head profile add new Panel – Cross section profile
viewer (1) – (2) and than software will add new Preview panel – (3)
1
2
3
d
b
To change tolerance values press Global Parameters (a), then choose Defects and Tolerances
(b) and select which type of tolerance you want to change (c). Then double click on the
selected value field (d) and in new window change it for New Value (e) and click OK. After
clicking OK the value field will be changed to the value entered by the user (f).
Events and Defects
a) Add and delete
b) hiding
a) Add and delete
During measurement it is possible to manually add information like Events and
Defects.
c
a
b
To add Events and Defects click to the chosen place (c) - Place where we want to add our
event /defect - for example and than select Data tools (a), add events or defect (b).
f
a
b
It is possible to delete an event via an option Data tools (a) – Events and defects editor (b).
before after
b) hiding
a
It is possible to hide Events and defects . They will not be permanently removed and will not
be visible on Line Chart Report. However, they will be visible in the event Events and defects
report. Press Propeties and choose Events and defects (a).
Select (unhook ) the Events and defects
you want to hide (a) and press OK (b).
Selected events disappeared from the
preview panel (c) .
Results
c
Speed change Limit
a) Speed limit for whole section
b) Speed limit for selected episode
Before changing the speed limit from 60 km/h to 200 km
2
1
e
f
When your
Template is set,
Click on Set
Template.
Software need to
know it before
working with
measurment
profile.
2
1
Results
c d
To align Rail Head Template with data measurment click Add and next
please select a points using lines (a). To add new line you need to
click add. Use a few lines (c) and later click Align (d). Measurment
data will align to Rail Head Template.
When your profiles are Aligned click Close.
Results
You can manually check the values, add some text.
Saved Screenshot
b
a