Professional Documents
Culture Documents
I. Directions: Analyze the questions. Identify the correct answer and write it on the space provided.
__________ 1. This refers to the graphic language of presentation with the aid of precision drawing instruments.
__________ 2. It is a graphic language of presentation with the use of pencil, eraser and paper only. It does not
produce straight lines rigidly with freedom and variety.
__________ 4. This drawing refers with the design preparation of working drawing that considers the specifications
and detailed description of the object.
__________ 5. It guides the draftsman to have a preparation and projection of horizontal lines and parallel lines in
horizontal direction.
__________ 7.This is used to guide the drawings of vertical and inclined lines, as well as projection of combination
angles.
__________ 8. It is used to draw and locate circles and arcs as well as their respective centers.
__________ 9.This is an optional tool used to erase inked or pencil lines, views etc.
__________ 10. This practically transfers or converts measurement using a particular indicated scale.
__________ 11. It is used to guide mechanical presentation or drawing of an irregular curved lines.
__________ 12. This refers to the working sheet where drawing activities are performed and presented.
II. Directions: Solve and interpret the following scales given below. Write your answers on the space
provided.
1 2 3 7 8 9
4 5 6 1 2 3
1 2 3 7 8 9
4 5 6 1 2 3
III. Directions: Solve and scale the following given below. Write your answers on the space provided. Show
your complete solution at the back.
OBJECT DRAWING
2.5 mm. 37. __________ cm.
38. __________ mm. 50 cm.
12 mm. 38. __________ cm.
39. __________ mm. 1.7 cm.
4 cm. 40. __________ mm.
41. __________ cm. 3 mm.
3.5 cm. 42. __________ mm.
Prepared by: