Professional Documents
Culture Documents
1.2 Code
American Society of Mechanical Engineers (ASME):
Section II Part A, Ferrous Material Specification, 2007 Edition
2.8 The manufacturer or processor shall report the results of all test required by this
Specification, the applicable supplementary requirements (if applicable) and the
Purchase Order. The heat number, the plate identificatier of the plate tested, and the
nominal plate thickness shall be shown in the test report. The year-date of the specification
to which the plates are furnished shall be included in the test report.
2.9 The Certified Test Report shall be dated and clearly identify the organization submitting the
report.
2.10 Material Mill Certificates shall be in accordance with EN-10204 3.1B.
2.11 The size, quantity & length of plates shall be as per relevant SWI0900053 PRS