Professional Documents
Culture Documents
IC PIN CONFIGURATIONS
BFW11
EXPERIMENT -1
Fig 2.1
Fig 2.2
Fig 2.3
Fig 2.4
EXPERIMENT -2
FULL WAVE PRECISION RECTIFIER
AIM: To study the operation of a Full wave precision rectifier.
CIRCUIT DIAGRAM
Fig 5.2
EXPERIMENT -3
LOW PASS ACTIVE FILTER (1st Order)
HIGH PASS ACTIVE FILTER (2nd Order)
AIM: To design and study the performance characteristics of 1st order Low pass
active filter and 2nd order High pass active filter.
CIRCUIT DIAGRAM:
Fig 6.1
Fig 7.3
TABULAR COLUMN :
EXPERIMENT-4
Fig 4.1
Fig 4.2
EXPERIMENT- 5
Fig:5.3 Inverting Positive voltage level Fig:5.4 Inverting Negative voltage level
detector detector
EXPERIMENT-6
EXPERIMENT 6 (b)
MONOSTABLE MULTIVIBRATOR
EXPERIMENT-8
EXPERIMENT-9
EXPERIMENT-10
EXPERIMENT - 11
COMPONENTS REQUIRED: IC 0809, resistors, capacitors, patch chords and IC trainer kits.
CIRCUIT DIAGRAM:
PROCEDURE:
1. Rig up the circuit as shown in the circuit diagram
2. For different input voltages in the range (0 - 5V) note down the digital output
3. Compare values of theoretical and practical output.
4. Plot a graph of digital output versus analog input and find the various characteristics like
accuracy, offset error, gain error.
TABULAR COLUMN:
Analog Digital output Digital
input (Theoretical) output Binary Output
voltage (Practical)
(Vi) d1 d2 d3 d4 d5 d6 d7 d8
(MSB (LSB)
)
Dec Hex Dec Hex
1.0 V
1.5 V
2.0 V
2.5 V
3.0 V
3.5 V
4.0 V
4.5 V
5.0 V
RESULTS:
Resolution: _________mV
VFSV: _________
1 MSB: ____________
EXPERIMENT-12