Professional Documents
Culture Documents
Format No.
F01(7.8/01)
t
:
ULR No cc233920000001 303F Calibration Done on 08.08.2020 SRF.No- &Date : 0001/08 & 08.08.2020
lssue Date 10.08.2020 Calibration Valid Upto 07.08.2021 Page : 1of1
UUC Receipt Date:
Calibrated for M/S.
Punjab Genral Industries Pvt. Ltd.
Plot No-149-150, Sec -24,
Faridabad-1 21 005 (Haryana)
Calibration Procedure / Method : As Calibration Procedure Document No. PCS/CP/01 Section No.CP-S -03
NOTE:
************
1. The result are valid only for this Calibrateilfttifii:** END THE REPORT
2, The calibration report shall nol be reproduced without the wrilten approval of calibration laboratory.
3. Result reported are valid at the time of & under the stated conditions of measurement
4. Laboratory standards are traceable to National/lnternational Standards.
5. Calibration Certificates issued for Weight & Measure parameters i.e;,Mass, Balance, Volumelric
equipment, Measuring Scales / Tapes etc. are for scientific pqrpose only and should not be used for Trade / Gommercial use.
CALIBRATED BY _4iL
APPROVED BY
Jw
(CALIBRATION ENGINEER)
ANWARA. SIDDIQUI
(Q.M/r.M.)