Professional Documents
Culture Documents
Sheet 04
Sheet 04
5. Using MIL-STD 105E, determine the single sampling plans for the
following information.
1/2
6. Using MIL-STD 105E, determine the double sampling plans for the
information below.
7. Using MIL STD 105E, determine the multiple sampling plans for the
following information.
8. Inspection results for the last 8 lots using the single sampling plan of n =
225, c = 3 are
I. 1 defective V. 3 defectives
II. 4 defectives VI. 0 defective
III. 5 defectives VII. 2 defectives
IV. 1 defective VIII. 2 defectives
If normal inspection was used for lot I, what inspection should be used for lot 1X?
9. Using the information from problem 8, what was the status after lot III? Lot
VII?
10. For a double sampling plan, code letter L, normal inspection, and AQL =
2.5%, the number inspected and the number defective for the last 10 lots are
n np n np
I 125 0 VI 125 1
II 125 2 VII 125 1
III 125 0 VIII 125 2
IV 250 6 IX 125 3
V 125 1 X 125 1