Professional Documents
Culture Documents
First handout:
Second handout:
1. What are the basic ship types? For these ship types discuss the features of appearance,
construction, layout, size etc.
2. Discuss different types of keels with figures.
3. What is double bottom? Why is it required? Discuss its different types with figures.
What are ABS rules for depth and thickness of double bottom?
4. Discuss machinery space double bottom
5. Discuss single bottom construction
6. What are the design criteria of engine room construction?
7. Different types of framing system
8. Shell plating
9. Decks, Deck plating, Deck beams and transverses, deck girders
10. Discuss deck sheathing
11. Discuss hatch corner gusset plate and insert plate fitted at hatch corner
12. Show ‘tween deck frame connection details
13. Show the types of knee bracket connections
14. Show connection between side stringer and a side stiffener
15. Show lower connections of hold frames
16. Show joints in side frames
17. Show connection between deck longitudinal and a web deck beam
18. Show gusset plate detail
19. What are gunwale, sheerstrake and stringer plates?
20. Discuss the ABS rule for centre girder design
21. What is panting? Discuss panting arrangements/structures
22. Discuss the additional stiffening needed to construct the pounding region
23. Discuss the plate construction at the end of the deckhouse
24. What is bulkhead? What are its types? Number of bulkheads necessary, spacing of
watertight bulkhead, construction, corrugated bd and its advantages, Discuss in details.
25. Show pillar construction.
26. How to maintain continuity of the longitudinal stiffeners through the transverse
watertight bulkhead?
27. Details of hatch opening (Eyres-chapter19).
28. Discuss hatch coamings design procedure.
Third handout:
Prefabrication
1. Discuss the prefabrication of ship units. What are its advantages? Define subassembly,
assembly and unit.
2. Show erection sequence of general cargo ship, bulk oil tanker, dry bulk cargo
3. Show a typical block erection of a bulk carrier
Superstructure
1. Discuss corrosion of ships. What is corrosion cell? What is galvanic series of metals and
alloys in sea water?
2. Show aluminum to steel connection. Why is it required?
3. What are the corrosion control systems? Discuss in details.
4. Discuss anti-fouling paint
5. Discuss protection of ships by means of paints
6. Discuss painting of cargo and ballast tanks
7. Discuss corrosion prevention by good design.
8. Discuss different cathodic protection system.
9. Discuss different surface preparation techniques for successful painting.
Others:
Minor items
Outfit
Strength of weld, fillet weld, unsymmetrical section subjected to an axial load, eccentric welded
joint subjected to moment, eccentric welded joint subjected to torsion and related problems
Extra
Which plans are to be submitted to Department of Shipping for approval a ship (cargo, tanker or
passenger) of length more than 24 meter?