Professional Documents
Culture Documents
1.0 PROCEDURES
1.1 Two Peg Test has been done to definite that the leveling equipment is well
or not.
1.2 The equipments for leveling test are situating like the figure below. The
leveling equipment at C and 2 sets of leveling rods at A and B. Distance
between CB and CA is 30m.
D A C B
1.3 The leveling rods are read and record at A and B points.(assume that a and
b)
1.4 The difference of value a and b are recorded as e.
1.5 The leveling equipment is place at D where the distance of DA is 10
meter.
1.6 The leveling rods at A and B are read. ( assume that a1 and b1 )
1.7 The difference of a1 and b1 are recorded as f.
1.8 The leveling equipment is well if the value of e and f not exceed the value
+0.005m or -0.005m.
1.9 If the value that we get is more than that value, the leveling equipment
need to service.
LEVELLING
GROUP 1
2.0 DATA
Difference(f-e), m 0.004
LEVELLING
GROUP 1
PICTURE OF TWO PEG S TES T
LEVELLING
GROUP 1
PICTURES ON FIELD WORK
LEVELLING
GROUP 1
A staff was placed at the determinate points.
LEVELLING
GROUP 1
Change Point ( Titik Pindah )
LEVELLING
GROUP 1
LEVELLING
GROUP 1