Professional Documents
Culture Documents
›Quality
›
Increase diagnostic confidence
›Efficiency
›
Help more patients and lower costs
›Agility
›
Quickly adapt to new challenges and opportunities
Reduce work and potential errors. Choose the ideal reagents. Unrivalled service and support.
Leica BOND‑MAX connects to common Access the full range of exceptional Leica Biosystems’ IHC & ISH scientific
LIS systems and the Leica CEREBRO Novocastra antibodies and probes or
TM
experts help with applications
sample tracking system as well as an select third-party antibodies. knowledge, preventative maintenance
unlimited number of BOND instruments. and instrument support.
›› Novocastra BOND RTU reagents
›› Leica BOND LIS-ip ›› Leica BOND Polymer Refine Detection ›› Applications advice
›› Leica CEREBRO ›› Open primaries ›› Instument support
›› HER2 Theranostic systems ›› Flexible maintenance contracts
Quality
Leica BOND‑MAX helps you create diagnostic confidence. With full automation
reducing repeats and standardizing staining, pathologists receive high‑quality slides
that help ensure patients get accurate answers.
The BOND Covertile™ system protects Deliver high-quality staining with BOND Leica BOND‑MAX provides complete
patient tissue with very gentle reagent reagents. These pre-optimized reagents on-board IHC & ISH automation that
application and incubation protection deliver exceptional automated IHC & ISH removes process variation to help you
to help you minimize tissue damage performance that consistently scores deliver the consistent staining
and repeats. highly on EQA schemes throughout the pathologists expect.
world.
Efficiency
Keep your work flowing by eliminating With three independent slide trays, each Quickly process urgent slides. Continuous
complexity. Leica BOND‑MAX runs are Leica BOND‑MAX is effectively three processing means a spare tray is never
quickly configured and ready‑to‑use stainers in one instrument. So you have far away, while ready‑to‑use reagents
reagents reduce preparation work to the flexibility of continuous processing eliminate preparation work – just load
simply scan, load, press play and walk while keeping your slides together to and run.
away. reduce sorting.
Agility
With a small footprint and benchtop You don’t need a large throughput to Leica BOND‑MAX is a proven industry
mounting, Leica BOND‑MAX will fit justify high-quality, fully automated performer. The availability of trained
easily into most existing laboratory IHC & ISH. By focusing on quality and operators plus Leica support and
layouts to negate the need for extensive efficiency, while eliminating functionality ready‑to‑use reagents means even a
remodeling or large areas of dead space. you don’t need, Leica BOND‑MAX frees laboratory new to fully automated
financial resources. IHC & ISH can consistently deliver
high-quality staining.
System Specifications
Covertile technology Optimized BOND Continuous processing Leica BOND control Small footprint
reagents center
Unlike other systems, A full range of Leica BOND-MAX is A single source for With benchtop mounting
Leica BOND instruments Novocastra BOND effectively three operation and reporting and a small footprint,
are gentle on the tissue reagents provides the independent stainers in for an unlimited number Leica BOND‑MAX easily
and ensure total tissue ideal match of one instrument – the of Leica BOND fits into tight laboratory
care with exceptionally consistent quality and ideal balance of instruments plus LIS spaces.
low dispense and waste effortless workflow. flexibility and and sample tracking
volumes. organization. connectivity.
System Specifications
Dimensions 760 mm (W) x 703 mm (H) x 775 mm (D) Mains frequency 50/60 Hz
29.9 in (W) x 27.6 in (H) x 30.5 in (D)
Power consumption 1000 VA
Weight (dry) 120 kg
Maximum operating temperature 35 °C
265 lb.
95 °F
Slide capacity 30
Minimum operating temperature 5 °C
Finished trays (10 slides) may be
41 °F
replaced continuously
Temperature required to meet 18–26 °C
Reagent container capacity 7 mL and 30 mL
staining performance 64 –79 °F
Number of reagent containers 36 requirements
External Bulk waste container Sound pressure level output < 85 dBA maximum
9L
capacity (at 1 m) < 65 dBA normal operation
· Tissue preparation
· Sample identification and tracking
· Tissue processors, cassettes and paraffin wax
· Embedding centers, accessories and paraffin wax
· Microtomes, blades and slides
· Coverslippers, mountants and coverslips
· Microscopy and imaging solutions
· Expert service and support
· Ongoing maintenance support
LEICA biosystems
Leica Biosystems is a global leader in workflow solutions bringing
Leica Biosystems brings
histopathology laboratories and researchers the highest quality, most together products, quality and
comprehensive product range in anatomical pathology. With complete support. Offering a complete
histology systems featuring innovative automation, NovocastraTM solution that helps you advance
reagents and Surgipath® consumables, Leica Biosystems offers the ideal
workflows, enhance diagnostic clarity and
product for each histology step and high-productivity workflow solutions
for the entire laboratory. deliver what really matters – better patient care.
North America Sales and Customer Support Scan this tag and use your smart phone
North America 800 248 0123
to find out more about Leica Biosystems
Asia/Pacific Sales and Customer Support
Australia 1800 625 286 Total IHC and ISH Solutions.
China +85 2 2564 6699
Japan +81 3 5421 2804
South Korea +82 2 514 65 43
New Zealand 0800 400 589
Singapore +65 6779 7823
Europe Sales and Customer Support 95.10799 Rev B - Order no. 1195.10799 ∙ 09/2012 ∙ Copyright © by Leica Biosystems
For detailed contact information about European sales offices or distributors please Melbourne Pty Ltd, Melbourne, Australia, 2012. Subject to modifications. LEICA and the
visit our website.
Leica Logo are registered trademarks of Leica Microsystems IR GmbH.