Checklist for Drum Internal Piping APIL-NCR-PPP-CHKL-002
June 2008
Contract / Project Name
Contract / Project No. Boiler Type Drawing Nos.
Sl. Checkpoints Status (Tick Remarks
No. if Confirmed) 01. Check the orientation and layout of drum internals. 02. Check and match the mating flange details and pipe routing of feed line, CBD line, dosing line, steam sampling line and water sampling line with drum drawings. 03. Ensure suitable supports are provided for internal piping at regular intervals. 04. Ensure the piping and its supports does not fool with internal baffles/ cyclone separators/tube holes. 05. Ensure to provide feed line from both the end of drum, if the drum length exceeds 5 m and use two pieces of pipe with flanged ending. 06. Ensure feed line, CBD line are below low water level. 07. Check enough no. of perforated holes of adequate size is provided in all the pipeline along its surface for uniform distribution / takeoff. 08 Ensure all the relevant design data, general notes and erection notes are provided. 09. Ensure all the pipelines and their supports are identified by mark nos. and their size, quantity, material specification etc., are listed. 10. Ensure correct weld symbol / detail is used. 11. Check whether stainless steel material is provided for steam sampling pipe & socket fitting. 12. Check whether any piping is fouling with man hole door while opening it. 13. Check whether note has been given to make trial assembly of all drum internals at shop itself before despatch. 14. Ensure all the dimension are provided with reference to any point. 15. Ensure all the support details are given. 16. Ensure that all the fastener requirements are given. 17. Check whether the painting specification is given as indicated below. a. One boiler in Two coat of red oxide zinc contract chromate primer.
Checked by Approved by Date: Sh. 1 of 2
Signature : Signature :
Name : Name : Format No. :
Checklist for Drum Internal Piping APIL-NCR-PPP-CHKL-002
June 2008
b. Two boilers in First Two coats of red
contract Boiler oxide zinc chromate primer. Second Boiler Two coats of Grey oxide zinc chromate primer.