This document provides design details for four raft beams (RB1, RB2, RB3, RB4). The beams are 950mm wide and 850mm deep with a clear length of 2981mm. Reinforcement is designed and specified to meet code requirements for moment capacity at the span and support, as well as for shear capacity on the sides. Checks are provided to ensure the beams do not experience buckling or excessive bearing stress.
This document provides design details for four raft beams (RB1, RB2, RB3, RB4). The beams are 950mm wide and 850mm deep with a clear length of 2981mm. Reinforcement is designed and specified to meet code requirements for moment capacity at the span and support, as well as for shear capacity on the sides. Checks are provided to ensure the beams do not experience buckling or excessive bearing stress.
This document provides design details for four raft beams (RB1, RB2, RB3, RB4). The beams are 950mm wide and 850mm deep with a clear length of 2981mm. Reinforcement is designed and specified to meet code requirements for moment capacity at the span and support, as well as for shear capacity on the sides. Checks are provided to ensure the beams do not experience buckling or excessive bearing stress.
Width Overall Length of the beam M 20 grade Fe 500 of the depth of clear length c/c length eff. length concrete steel beam the beam Lclear Lc/c Leff fck fy b D Cl29.2 IS456 mm mm mm mm mm N/mm2 N/mm2 950 850 2981 3932 3428.15 20 500 CHECK-DEEP BEAM ACTION (TO AVOID BUCKLING) Result Result Result Leff / D Cl 29.1IS 456:2000 Leff / b D/b IS 456:2000 4.03 not okay 3.61 <50,okay 0.89 <25,okay SUPPORT & SPAN MOMENT SPAN SUPPORT MOMENT 601.88 MOMENT 1087.2 KN.m KN.m Design for positive reinforcement at span Lever arm Ast span Reinf. details provided at span Depth of tensile Z req. Nos. dia Ast prov. Result zone for +ve reinf 'mm' Cl 29.2b M/(0.87fyZ) mm mm 2 Cl 29.3.1c IS 456-2000 mm mm 2 12 20 3769.91 Okay 41.09 940.63 1470.96 0 0 Design & distribution of the negative reinforcement at support Lever arm Ast supt Depth of tensile Ast req. Z req. Lclear / D zone for -ve reinf. Cl 29.3.2 Cl 29.2b M/(0.87fyZ) Cl 29.3.2 IS 456-2000 IS 456-2000 Zone 1 Zone 2 Zone 1 Zone 2 mm mm2 mm mm mm2 mm2 940.63 2657.06 3.51 170 510 3675.37 -1018.31 Reinf. details provided at supt Zone 1 Reinf. details provided at supt Zone 2 Nos. dia Ast prov. Result Nos. dia Ast prov. Result mm mm2 mm mm2 12 20 12 20 3769.91 Okay 3769.91 Okay 0 0 0 0 Side face reinforcement Vertical Max Max Reinf. details prov. Vertical reinf. reinf. dia of spacing Dia spacing Ast prov. Cl 32.5a the bar of V reinf. prov. prov. Result IS 456-2000 Cl 32.5a Cl 32.5b mm2 IS 456-2000 IS 456-2000 mm mm mm2 per face mm mm 8 150 1340.41 Okay 712.5 16 450 0 0
Horizontal Max Max Reinf. details prov. Horz reinf.
reinf. dia of spacing Dia spacing Ast prov. Cl 32.5c the bar of H reinf. prov. prov. Result IS 456-2000 Cl 32.5c Cl 32.5d mm2 IS 456-2000 IS 456-2000 mm mm mm2 per face mm mm 20 200 1570.80 Okay 1187.5 20 450 0 0 Check for bearing stress of supports width of length of Max width Load on Bearing Bearing Result 0.2 Lclear stress support support support stress allowable Cl 34.4 Cl 34.4 mm mm mm kN N/mm 2 N/mm2 IS 456-2000 850 850 596.2 1399.14 3.94 9.00 Okay