Professional Documents
Culture Documents
This laboratory accredited under Skim Akreditasi Makmal Malaysia (SAMM) meets the
requirements of MS ISO/IEC 17025:2005 ‘General requirements for competence of testing
and calibration laboratories’. This Malaysian Standards is identical with ISO/IEC 17025:2005
published by the International Organization for Standardization (ISO).
SCOPE OF ACCREDITATION:
Mortar Compressive Strength of Mortar Cube in MS 522 Part 2: 2005 Clause 7.10
the force range of 0 kN to 3000 kN & Clause 7.11
Signatories:
2. Tan Poh Im
Issue date: 12 June 2012
Valid until: 18 March 2015
SCOPE OF ACCREDITATION:
Materials/ Type of test/ Standard Test
Products Properties measured/ Methods/
Tested Range of measurement Equipment/Techniques
Hardened Concrete Determination of Initial Surface Absorption BS 1881 Part 208: 1996
Resin Based Mortars Determination of Resin Cube Compressive ASTM C109 /C109M-08
Strength Clause 10.6
SCOPE OF ACCREDITATION:
BS EN 1097-6: 2000
Determination of Clay, Silt and Dust in BS 812: Part 1 1975 Clause 7.2.4
Fine or Coarse Aggregates (Decantation Method)
MS 30: 1971 Section 3,
Method B (Decantation Method)
ASTM C 117-04
Issue date: 12 June 2012
Valid until: 18 March 2015
SCOPE OF ACCREDITATION:
SCOPE OF ACCREDITATION
BS EN 933-7: 1998
SCOPE OF ACCREDITATION:
Filling Materials Determination of Dry Density /Moisture BS 1377: Part 4 1990 Clause
(Soil) Content Relationship (Vibrating Hammer 3.7
Method)
SCOPE OF ACCREDITATION:
(v) Elongation
SCOPE OF ACCREDITATION:
Steel Bar and Steel Plate Tensile Testing for Metallic Material to BS EN 10002-1 2001
measure Tensile Strength Test, Yield ISO 6892: 2009
Stress Test and Elongation Calculation in Excluding site sampling
the force range of 0 kN to 2000 kN
Hot Rolled Steel Bars For Determination of Bend & Rebend Test in MS 146: 2006 Clause 16.2 & 16.3
The Reinforcement of the force range of 0 kN to 550 kN Excluding site sampling
Concrete
(c) Weld
Issue date: 12 June 2012
Valid until: 18 March 2015
SCOPE OF ACCREDITATION:
Portland Cement Determination of Autoclave Expansion of ASTM C 151- 05/C 151 M-09
Hydraulic Cement
Signatory:
SCOPE OF ACCREDITATION:
Signatory:
SCOPE OF ACCREDITATION:
Signatories:
2. Tan Poh Im
Issue date: 12 June 2012
Valid until: 18 March 2015
SCOPE OF ACCREDITATION:
Signatory:
SCOPE OF ACCREDITATION:
ASTM D 1556-07
Signatories:
2. Tan Poh Im