Professional Documents
Culture Documents
Exp1.Introd Uction Amplitude Modulation Purpose of This Expirement
Exp1.Introd Uction Amplitude Modulation Purpose of This Expirement
1733010
Communications
lab
Dr.Ali Hayajneh
Purpose of
Exp1.Introd
this
uction
expirement
Amplitude
Recognize the main
part of the kit and
modulation
how it turn on like the
kit dosent work since
Initially we talk about
the power supply isn’t
the kit that we use
arrived to kit so it
names anacom1-1, it
should to arrive power
contain a more than
to kit that values -12 0
one part audio signal ,
12,it have part audio
modulatr and
input that give
transmitter signal so
message signal its
this part of
have range frequncy
expierment learn
equal to rage the
about how we can
audio, and modulator
determine The
part but in this kit just
Effective change of
SSB and DSB
frequency or
modulation , antenna
amplitude for the
and output
message signal and
Material
transmitter.
carier on modulation
Learn, basic
signal and theconcept of
Anacom 1-1, osillicope
AM such is of
modulation thethis
screen .
frequency or
expirement DSB .
amplitudeof message
signal effictive on
modulation ? and how
it effictive on
modulation ?
1-make sure of there :
a-in this experiment should the input internal postion which mean that we want
the message input come from input audio oscillator (audio signal).
b-make sure the mod (modulation ) in kit switch to DSB and the speaker switch
off.
c-amplitude and frequency preset put it to the maximum (full clockwise) and in
the balance modulator and BPF in circuit 1 the balance preset to maximum (fully
clock wise)
d-switch on the power supply.
2- according the expirement required , firstly the required examine the output of
the audio oscillator and find the range of amplitude and frequency so use ch1
and put on test point 14 and find the freq and amp ranges so the result was:
Max freq=3.5kHZ, Min freq=240.7HZ, Max Amp=2.34V,Min amp=0.
2-fixed the amplitude to maximum and change the freq of 850 Hz.
3-required to see the output from Test point .9,ch1 stayed in the message signal
and put ch2 in Tp .9 then convert the osllicope screen return it to ch2 so the
carrier is = 1 MHZ and the Amp 117mv.
amplitude
Message signal
1.5
D E
3v 1.9v
Modulation index
.22
modulation
.5 222m 164m .15
0 0
affect of
varing
amplitude
and carrier
message
signal and
varies of
amplitude
message
signal effect
to modulation
index
propotionally.
And when the
modulation
index 100%
the envelop
shape
maximmum
level reach
twice and the
minummum
go to zero.