Professional Documents
Culture Documents
NKTECHNICAL
Examinations, Testing and Certification
Requirements of USA OSHA for Cargo Gears
INFORM4TION
of Ships Loading/Unloading at USA Ports 290
No.:
Date : 15th December 1998
The information relating to the Amendments to the "Safety and Health Regulations for
Longshoring" of the USA "Occupational Safety and Hca]th Administration" (OSHA) has
already been shown in NK Technical Information No. 276.
Further information has just been received from OSHA in respect of its interpretation
of certain requirements and of application thereof, and its summary is shown below.
(Some of the following information are same as shown in NK Technical Information No.
276.)
For ships of which cargo handling appliances are surveyed under the Society's Rules,
their derrick systems should be subjected to an annual thorough examination instead of
an annual examination and a quadrennial thorough survey (every four years), both
required under the Rules, and be certified on and after 27 July 1998. Cargo gears
(such as cranes and derrick systems) should then be subjected to load testing eveiry five
years and be certified on and after 16 July 2001. It is therefore recommended that
necessary actions should be taken before enter in the USA ports.
Class NI<
NIPPON KAIJI KYOKAI
TELEX: J22975 CLASSNK
4-7, KIOI-CHO, CHIYODA-KU, 2324280 CLASNKJ
TOKYO 102-8567, JAPAN. CABLE: CLASSNK TOKYO
This "Technical Information"' 1s provided only for the purpose of supplying current 1nformat1on to its readers N1poon Ka111 Kyoka1. its officers, employees and agents or sub-contractors do
not warrant the accuracy of the information contained herem and are not liable for any loss. damage or expense sustained whatsoever by any person caused by use of or reliance on this
1nformat1on