Professional Documents
Culture Documents
Bracelet and Necklace Loop Closure - Free Pattern: Tuesday, February 24, 2015
Bracelet and Necklace Loop Closure - Free Pattern: Tuesday, February 24, 2015
by Sandra D Halpenny
This is a pattern for the closure I did with the Round Lace Bracelet pattern. I had
several requests so I thought I would share how to make it. You can use this closure
with any bracelet or necklace pattern too. I like making my closures with beads to
match. That way you do not need to run out to the store to buy a clasp and you will
always have something at home to match what you are making.
Start by waxing and stretching your thread, use Nymo D or C-Lon & a #11 or #12
beading needle. Tie in a “stopper” bead, leaving about an 8” tail and begin at step #1.
*Fireline 4 or 6lb. crystal fishing line also works great for bead weaving.
1
1. After finishing your bracelet use the
working thread and Pick up 15A, go with
thread down through 1 a bead in your
bracelet and forward through the 1st A
bead just added in this step.
2
4. Pick up 2A, go with thread down into
the 1st A bead, step #3, and forward
through the 3rd and 4th A beads, step
#1.
3
7. Pick up 6A, go with thread down into
the 1st A bead, step #6c, and forward
through the 8th and 9th A beads, step #1.
4
10. a) Pick up 2A, go with thread down
into the 1st A bead, step #9, and forward
through the 13th and 14th A beads, step
#1.
5
13. Pick up 2A, go with thread down through
the 4th and 5th A beads, step #12.
6
15. a) Pick up 4A, go with thread down through the B bead, through the A bead, up
through the B bead again, step #14a, and the 2 A beads, step #13.
b) Pick up 4A, go with thread up through the B bead, through the A bead, down through
the B bead again, step #14b, and the 2 A beads, step #13.Continue with working thread
around through all the toggle beads several times and then weave in and end your
thread.