Professional Documents
Culture Documents
MEC411 2012 - 03 Test 1 PDF
MEC411 2012 - 03 Test 1 PDF
To be filled by student
To be filled by lecturer
Name : Q. No. CO Marks
Student ID : 1 CO2
Group : 2(a) CO1
Semester : March – June 2012 2(b) CO2
3(a) CO2
3(b) CO1
Answer ALL question. The duration of this test is 1 hour and 30 minutes.
Total
QUESTION 1
Figure Q1 show a support beam system that consist of member AB and BC that connected
by a pins at point A, B and C. Pin at B and C have a double shear while pin at A only have a
single shear. Taking the allowable normal stress of member BC as 200 MPa and the
allowable shear stress for the pins is 70MPa. Determine:
o
60 A
2.4 m
B
30 kN/m
Figure Q1
QUESTION 2
a) A bar having a cross-sectional area A is constrained to fit horizontally between two fixed
supports at a distance L from each other as illustrated in Figure Q2(a). The rod is
subjected to a positive temperature change of ΔT. Taking the modulus of elasticity of the
bar as E and its coefficient of thermal expansion as α, express the stress σ in the r d in
terms of ΔT, E, and α.
(5 marks)
Figure Q2(a)
2m
120 kN
2.8 m
Figure Q2(b)
QUESTION 3
a) The solid steel rod AB has a diameter of 60 mm. The steel pipe CD has an outer
diameter of 80 mm and a wall thickness of 6 mm. Modulus of rigidity of steel is 83 GPa.
Determine;
i) The maximum permissible value of T subject to the maximum shearing stress in rod
and pipe is not to exceed 70 MPa, and
ii) The angle of twist for section CD.
(12 marks)
D
C
A LCD = 1.0 m
LAB = 1.4 m
Figure Q3(a)