Professional Documents
Culture Documents
TEST 2
SEMESTER II, SESSION 2020/2021
PROGRAMME : SEAW
INSTRUCTION TO CANDIDATES :
WARNING!
Students caught copying/cheating during the examination will be liable for disciplinary
actions and the faculty may recommend the student to be expelled from the university.
Q1. Figure Q1 shows an overhanging beam with pin support at point B and roller support
at point E. The beam is subjected to uniformly distribution load from point A to point
E, concentrated load at point C, inclined load at point F and a clockwise moment at
point D.
FIGURE Q1
TEST 2 SEAA2223
Q2. (a) Figure Q2(a) shows a cross section of the concrete beam. The beam carries the
maximum bending moment, M = 90 kNm and the maximum shear force,
V = 48 kN.
A A
FIGURE Q2(a)
(b) A beam is to be designed to carry a maximum shear force of 100 kN and bending
moment of 250 kNm. The cross-section of the beam is rectangular with a
dimension depth, D is equal to 2 times the width, B as shown in figure Q2(b).
If the allowable bending stress is 150 N/mm2 and the allowable shear stress is
10 N/mm2, determine the minimum cross-sectional dimension of the beam.
(10 marks)
FIGURE Q2(b)