Professional Documents
Culture Documents
B) Plastering to walls
a) 1st floor Page 77 0.53 3.6 1 Sqm
b) 2nd floor 0.53 5.40 1 Sqm
c) 3rd floor 0.53 7.20 1 Sqm
d) 4th floor 0.53 9.00 1 Sqm
e) 5th floor 0.53 10.80 1 Sqm
f) 6th floor 0.53 12.60 1 Sqm
g) 7th floor 0.53 14.40 1 Sqm
i) 8th floor 0.53 16.20 1 Sqm
gj 9th floor 0.53 18.00 1 Sqm
Cellar /up
to plinth 2nd 8th 9th
3rd Floor 4th Floor 5th Floor 6th Floor 7th Floor
level / 1st Floor Floor Floor
Floor
a) Footings, Bed blocks, Steps Page 75 59.00 330.00 363.00 396.00 429.00 462.00 495.00 528.00 561.00 594.00 1 Cum
d) Lintels Page 78 843.00 675.00 742.50 810.00 877.50 945.00 1012.50 1080.00 1147.50 1215.00 1 Cum
e) RCC roof slabs upto 150 mm depth -- do -- 143.00 89.00 97.90 106.80 115.70 124.60 133.50 142.40 151.30 160.20 1 Sqm
f) RCC slabs upto 150-300 mm depth -- do -- 149.00 93.00 102.30 111.60 120.90 130.20 139.50 148.80 158.10 167.40 1 Sqm
g) Sunshades of any width -- do -- 167.00 104.00 114.40 124.80 135.20 145.60 156.00 166.40 176.80 187.20 1 Sqm
h) Columns -- do -- 127.00 948.00 1042.80 1137.60 1232.40 1327.20 1422.00 1516.80 1611.60 1706.40 1 Cum
i) Beams -- do -- 1276.00 795.00 874.50 954.00 1033.50 1113.00 1192.50 1272.00 1351.50 1431.00 1 Cum
59 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 7.32M -Steel scaffolding pipes , jack props , wallers Foot plates , brackets , steel
centering plates etc.
a) Lintels -- do -- 1519.00 1064.00 1170.40 1276.80 1383.20 1489.60 1596.00 1702.40 1808.80 1915.20
1 Cum
b) RCC roof slabs upto 150 mm depth -- do -- 258.00 141.00 155.10 169.20 183.30 197.40 211.50 225.60 239.70 253.80
1 Sqm
c) RCC slabs upto 150-300 mm depth -- do -- 268.00 146.00 160.60 175.20 189.80 204.40 219.00 233.60 248.20 262.80
1 Sqm
d) Sunshades of any width -- do -- 300.00 163.00 179.30 195.60 211.90 228.20 244.50 260.80 277.10 293.40
1 Sqm
e) Columns -- do -- 229.00 1494.00 1643.40 1792.80 1942.20 2091.60 2241.00 2390.40 2539.80 2689.20
1 Cum
f) Beams -- do -- 2300.00 1253.00 1378.30 1503.60 1628.90 1754.20 1879.50 2004.80 2130.10 2255.40
1 Cum
CEMENT MORTAR PER CUM CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand ( 1.05 cum ) 564.67 564.67 564.67 564.67 564.67 564.67
20 mm GRADED METAL
Arregates 20mm nominal size 0.60 1704.05 1022.43
12 mm GRADED METAL
Arregates 13.20 / 12.50mm nominal size
0.60 1460.30 876.18
Arregates 10mm nominal size 0.20 1260.30 252.06
Arregates 6mm nominal size 0.20 1054.05 210.81
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
1 Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable
materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before
dismantling including all labour charges , Overheads & Contractor profit etc., complete
a) Brick masonry (BLD-CSTN-14-6/299)
Mazdoor(unskilled) 0.409 Nos. 215.00 1 Each 87.94
Add for MA @ 40% 0.40 87.94 35.17
Rate per 1 cum 123.11
Overheads & Contractors Profit @14% 0.14 123.11 17.24
140.34
say 140.00
h) Flat and pan tiles or Mangalore tiles over flat tiles roof with out roof timbers :
Rate as per SSR S.No.809(BMT-R.04) 10.00 sqm 83.00 10 sqm 83.00
Add for MA @ 40% 0.40 83.00 33.20
Rate per 10 sqm 116.20
Rate per 1 sqm 11.62
Overheads & Contractors Profit @14% 0.14 11.62 1.63
13.25
say 13.00
l) Clean removal of lime plaster from walls and raking out joints 20mm deep
or from terraced roof and raking out joints 100 mm deep
Rate as per SSR S.No.818(BMT-R.14) 10.00 sqm 27.00 10 sqm 27.00
Add for MA @ 40% 0.40 27.00 10.80
Rate per 10 sqm 37.80
Rate per 1 sqm 3.78
Overheads & Contractors Profit @14% 0.14 3.78 0.53
4.31
say 4.00
m) Clean removal of cement plaster from walls and raking out joint 200 mm deep
Rate as per SSR S.No.819(BMT-R.15) 10.00 sqm 28.00 10 sqm 28.00
Add for MA @ 40% 0.40 28.00 11.20
Rate per 10 sqm 39.20
Rate per 1 sqm 3.92
Overheads & Contractors Profit @14% 0.14 3.92 0.55
4.47
say 4.00
n) Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or
steel ) shutters including Chowkhats , architraves,hold fasts and other attachments etc.,
and stacking them within 100m lead including labour charge etc., and Overheads &
Contractors profit complete for finished item of work(BLD-CSTN-14-11)
a) Not exceeding 3 sqm in area :
Details of cost per each :
2nd class mason 0.10 Nos. 260.00 1 No. 26.00
Mazdoor(Male) 0.20 Nos. 215.00 1 No. 43.00
2nd class Blacksmith 0.05 Nos. 260.00 1 No. 13.00
Add for MA @ 40% 0.40 82.00 32.80
114.80
Overheads & Contractors Profit @14% 0.14 114.80 16.07
Cost per each 130.87
Say 131.00
2 Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank
with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for finished item of work
including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308) (BLD-CSTN-2-1)
3 Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank
with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and Overheads &
Contractors profit complete for finished item of work including seigniorage excluding dewatering charges etc., as
per SS 20 B(APSS 308) (BLD-CSTN-2-1& COM-LDLFT-6-66)
Rate with initial lead & lift 1.00 cum 243.66 1 cum 243.66
Mazdoor for extra lift ( 1 No. for 60m) 0.02 Nos. 215.00 1 Each 4.30
Add for MA @ 40% 0.40 4.30 1.72
Overheads & Contractors Profit @14% 0.14 6.02 0.84
Rate per 1cum 250.52
Say 251.00
4 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for
finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-2)
5 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for
finished item of work including seigniorage including dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-2)
6 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for
finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-3)
7 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for
finished item of work including seigniorage including dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-3)
8 Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring
blasting ) and depositing on bank with an initial lead of 10m and depth up to 3m including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and Overheads &
Contractors profit complete for finished item of work including seigniorage excluding dewatering charges etc., as
per SS 20 B(APSS 308) (BLD-CSTN-2-4)
9 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and Overheads &
Contractors profit complete for finished item of work including seigniorage excluding de watering charges etc., as
per SS 20 B(APSS 308) (BLKD-CSTN-2-5)
10 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing on bank
for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for finished item
of work including seigniorage excluding de watering charges etc., as per SS 20 B(APSS 308) (BLKD-CSTN-2-6)
11 Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for
finished item of work including seigniorage excluding de watering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-7)
12 Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T & P,
labour charges etc., and Overheads & Contractors profit complete for finished item of work.
Conveyance charges 1 cum 50.35 1 cum 50.35
Overheads & Contractors Profit @14% 0.14 50.35 7.05
57.40
Rate per 1 Cum Say 57.00
13 Providing anti termite treatment as per IS 6315 (Part-2) 2001 (pre-constructional chemical treatment
measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of
the basement filling below flooring bed as per the specified procedure confirming to IS 6315 (Part-2) 2001 and
other relevent approved specification duly using Chlorpyriphos / Lindane emulsifiable concentrate 20% with 1%
concentration @ 7.5 Liters/sqm of the vertical surface & 5.0 Liters/sqm of the horizontal surface of the substructure
to a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including
excavation channel along the wall & rodding etc & cost & conveyane of all materials to the site, cost of labour for
spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge.(BLD-
CSTN-16-1)
Unit : 10sqm
A)Materials
Chloropyriphos Lindane Emulsifiable
concentrate of 20%(BMS-W-09) 4.51 Ltrs 200.00 1 Ltr 902.00
B)Water charges 1% 0.01 902.00 9.02
C)Labour charges
Man Mazdoor 3.00 Nos. 215.00 1 No. 645.00
Sprayer 0.22 Nos. 260.00 1 No. 57.20
Add for MA @ 40% 0.40 702.20 280.88
1894.10
D)Hire charges
Sprayer , drilling machine etc., 10% 0.10 1894.10 189.41
Sundries and contingencies 3% 0.03 1894.10 56.82
Water charges&Electricity 1.50% 0.015 1894.10 28.41
2168.74
Overheads & Contractors Profit @14% 0.14 2168.74 303.62
Rate per 10sqm 2472.37
Rate per 1sqm 247.00
14 Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not
exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all
peraitonal,incidental,loabour charges,hire charges of T&P etc., and Overheads & Contractors profitcomplete for
fnished item of work(APSS NO.309&310) ( BLD-CSTN-2-8)
Unit : 1 cum
Taking output = 6 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 215.00 1 No. 66.65
Add for MA @ 40% 0.40 66.65 26.66
b)Material :
Coarse sand for filling 6.00 cum 179.22 1 cum 1075.32
1168.63
c&d)
16 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc.,
and Overheads & Contractors profit complete for fnished item of work (APSS NO.309&310) (BLD-CSTN-2-9)
Unit : 1 cum
Taking output = 6 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 215.00 1 No. 66.65
Add for MA @ 40% 0.40 66.65 26.66
93.31
b&c)
Overheads & Contractors Profit @14% 0.14 93.31 13.06
Rate per 6 cum (a+b+c) 106.37
Rate per 1 cum (a+b+c) / 6 17.73
Rate per 1cum Say 18.00
17 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed Trap from approved quarry
including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including
seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level
curing etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 402) (BLD-CSTN-3-
5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 5.50 1 Kgs 891.00
Coarse aggregate 40mm 0.90 Cum 1166.55 1 Cum 1049.90
Fine aggregate ( Sand ) 0.45 Cum 199.22 1 Cum 89.65
Water (including curing) 1.20 kl 77.00 1 kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
2881.11
Overheads & Contractors Profit @14% 0.14 2881.11 403.36
Rate per 1cum 3284.47
Say 3284.00
18 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including
seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level
curing etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No. 402) (BLD-CSTN-3-
7)
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 5.50 1 Kgs 712.80
Coarse aggregate 40mm 0.90 Cum 1166.55 1 Cum 1049.90
Fine aggregate ( Sand ) 0.45 Cum 199.22 1 Cum 89.65
Water (including curing) 1.20 kl 77.00 1 kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
2702.91
Overheads & Contractors Profit @14% 0.14 2702.91 378.41
Rate per 1cum 3081.32
Say 3081.00
19 Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard granite stones carted from
approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from
approved quarry, to site and including seigniorage charges, sales & other taxes on all materials including labour
for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and Overheads
& Contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5.50 1 Kgs 326.70
CR stone (30x x30 x 60cm) 0.44 Cum 453.61 1 Cum 199.59
Rough stone ( 20 x 20 x 75cm) 0.50 Cum 492.50 1 Cum 246.25
Through stones (25 x 25 x 45 to 60cm) 0.16 Cum 948.69 1 Cum 151.79
Fine aggregate(sand) 0.33 Cum 199.22 1 Cum 65.74
B) LABOUR
1st class mason 1.20 Nos. 285.00 1 Each 342.00
Mazdoor (unskilled) 2.00 Nos. 215.00 1 Each 430.00
Add for MA @ 40% 0.40 772.00 308.80
2070.87
Overheads & Contractors Profit @14% 0.14 2070.87 289.92
Rate per 1cum 2360.79
Say 2361.00
20 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering
using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete,
curing etc.,and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402) (BLD-CSTN-3-14)
B.LABOUR :
1st class Mason 0.133 Nos 285.00 1 Each 37.91
2nd class Mason 0.267 Nos 260.00 1 Each 69.42
Mazdoor (both men&women) 4.60 Nos 215.00 1 Each 989.00
Add for MA @ 40% 0.40 1096.33 438.53
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 364.80 1 hour 486.28
Needle vibrator 40mm ( petrol ) 1.333 hours 120.40 1 hour 160.49
Add MA @ 25% on crew charges 0.40 370.44 148.18
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 5630.65
a Footings
Rate for Design mix M 25 1.00 Cum 5630.65 1 Cum 5630.65
Hire charges of centering and
scaffolding 1.00 Cum 59.00 1 Cum 59.00
Labour charges 1.00 Cum 330.00 1 Cum 330.00
Add for MA @ 40% 0.40 330.00 132.00
6151.65
Overheads & Contractors Profit @14% 0.14 6151.65 861.23
7012.88
Rate per 1cum Say 7013.00
b Column pedestals
Rate for Design mix M 25 1.00 Cum 5630.65 1 Cum 5630.65
Hire charges of centering and
scaffolding 1.00 Cum 70.00 1 Cum 70.00
Labour charges 1.00 Cum 524.00 1 Cum 524.00
Add for MA @ 40% 0.40 524.00 209.60
6434.25
Overheads & Contractors Profit @14% 0.14 6434.25 900.79
7335.04
Rate per 1cum Say 7335.00
21 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , Steel
scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc. including all
operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing
etc.,and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402 (BLD-CSTN-3-15)
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 364.80 1 hour 486.28
Needle vibrator 40mm ( petrol ) 1.333 hours 120.40 1 hour 160.49
Add MA @ 25% on crew charges 0.40 370.44 148.18
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 5958.82
a) COLUMNS :
i) un supported height up to 3.66 m
Rate for other Floors FF SF TF 4F 5F 6F
Rate as above 5958.82 5958.82 5958.82 5958.82 5958.82 5958.82
Hire charges of centering and
scaffolding 127.00 127.00 127.00 127.00 127.00 127.00
Labour charges 948.00 1042.80 1137.60 1232.40 1327.20 1422.00
Add for MA @ 40% 379.20 417.12 455.04 492.96 530.88 568.80
(Manual)Lift charges of materials 0.00 129.50 259.00 388.50 518.01 647.51
Add for MA @ 40% 0.00 51.80 103.60 155.40 207.20 259.00
Rate per 1cum 7413.02 7727.04 8041.06 8355.08 8669.10 8983.12
Overheads & Contractors Profit @14% 1037.82 1081.79 1125.75 1169.71 1213.67 1257.64
8450.84 8808.83 9166.81 9524.79 9882.77 10240.76
Say 8451.00 8809.00 9167.00 9525.00 9883.00 10241.00
b) LINTELS :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as above 5958.82 5958.82 5958.82 5958.82 5958.82 5958.82
Hire charges of centering and
scaffolding 843.00 843.00 843.00 843.00 843.00 843.00
Labour charges 675.00 742.50 810.00 877.50 945.00 1012.50
Add for MA @ 40% 270.00 297.00 324.00 351.00 378.00 405.00
(Manual)Lift charges of materials 0.00 129.50 259.00 388.50 518.01 647.51
Add for MA @ 40% 0.00 51.80 103.60 155.40 207.20 259.00
Rate per 1cum 7746.82 8022.62 8298.42 8574.22 8850.02 9125.82
Overheads & Contractors Profit @14% 1084.55 1123.17 1161.78 1200.39 1239.00 1277.62
8831.37 9145.79 9460.20 9774.61 10089.02 10403.44
Say 8831.00 9146.00 9460.00 9775.00 10089.00 10403.00
22 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering
using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting materials
mechanically, laying concrete, curing etc.,and Overheads & Contractors profit complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402 (BLD-CSTN-3-16)
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 364.80 1 hour 112.36
Needle vibrator 40mm ( petrol ) 0.308 hours 120.40 1 hour 37.08
Add MA @ 25% on crew charges 0.40 85.59 34.24
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 4725.84
A) BEAMS :
i) un supported height up to 3.66 m
Rate for other Floors FF SF TF 4F 5F 6F
Rate as above 4725.84 4725.84 4725.84 4725.84 4725.84 4725.84
Hire charges of centering and
scaffolding 1276.00 1276.00 1276.00 1276.00 1276.00 1276.00
Labour , lift charges for scaffolding 795.00 874.50 954.00 1033.50 1113.00 1192.50
Add for MA @ 40% 318.00 349.80 381.60 413.40 445.20 477.00
Lift charges of materials(Winch 35HP-
Electric) 0.00 139.32 153.25 167.18 181.12 195.05
Add MA @ 25% on crew charges 0.00 16.49 18.14 19.79 21.44 23.09
Rate per Cum 7114.84 7381.95 7508.83 7635.71 7762.60 7889.48
Overheads & Contractors Profit @14% 996.08 1033.47 1051.24 1069.00 1086.76 1104.53
8110.92 8415.42 8560.07 8704.71 8849.36 8994.01
Say 8111.00 8415.00 8560.00 8705.00 8849.00 8994.00
B) RCC SLABS :
Roof Slabs 115mm thick :
un supported height up to 3.66 m
Rate for Design mix M 25
0.115 Cum 4725.84 1 Cum 543.47
22 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering
using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete,
curing etc.,complete but excluding cost of steel and its fabrication charges for 60cm wide sun-shades 7.5cm
thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges
for mixing, laying, curing etc.,
and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for finished
item of work (APSS No. 402, 403 & 903)(BLD-CSTN-3-16)
A.MATERIALS :
Cement 380.00 Kgs 5.50 1 Kg 2090.00
20mm HBG graded metal 0.80 Cum 1535.94 1 Cum 1228.75
Sand 0.40 Cum 199.22 1 Cum 79.69
Chemical admixtures 1.00 Cum 50.00 1 Cum 50.00
B.LABOUR :
1st class Mason 0.067 Nos 285.00 1 Each 19.10
2nd class Mason 0.133 Nos 260.00 1 Each 34.58
Mazdoor (both men&women) 3.077 Nos 215.00 1 Each 661.56
Add for MA @ 40% 0.40 715.23 286.09
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 364.80 1 hour 112.36
Add MA @ 25% on crew charges 0.40 57.07 22.83
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 4677.35
23 Brick masonry for panel walls 230mm thick in superstructure with CM (1:8) prop: (cement : sand) using
second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40
Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including
seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing, etc.,and Overheads & Contractors profit complete
for finished item of work. (APSS No. 501 & 504).(BLD-CSTN-5-5)
Unit : 1cum
A.MATERIALS :
Cement 36 Kgs 5.50 1 Kgs 198.00
Bricks 2nd class 23x11x7cms 512 Nos 3381.13 1000 Nos 1731.14
Fine aggregate ( Sand ) 0.20 cu.m. 199.22 1 cu.m. 39.84
water charges @ 1% 0.01 1968.98 19.69
B.LABOUR :
1st class mason 0.24 Nos. 285.00 1 Each 68.40
2nd class mason 0.56 Nos. 260.00 1 Each 145.60
Mazdoor (Unskilled) 1.89 Nos. 215.00 1 Each 406.35
Add for MA @ 40% 0.40 620.35 248.14
Rate for 1 cu.m. 2857.16
a) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 2857.16 2857.16 2857.16 2857.16 2857.16 2857.16
Hire charges for Access Scaffolding 23.00 23.00 23.00 23.00 23.00 23.00
Labour charges for scaffolding 156.48 234.74 313.00 391.26 469.48 547.74
Add for MA @ 40% 62.59 93.90 125.20 156.50 187.79 219.10
Lift charges ( Page 131 of Std. Data ) 0.00 62.04 124.07 186.11 248.14 310.18
Add for MA @ 40% 0.00 24.82 49.63 74.44 99.26 124.07
Rate for 1 cu.m. 3099.23 3295.65 3492.06 3688.48 3884.83 4081.25
Overheads & Contractors Profit @14% 433.89 461.39 488.89 516.39 543.88 571.38
3533.12 3757.04 3980.95 4204.87 4428.71 4652.63
Say 3533.00 3757.00 3981.00 4205.00 4429.00 4653.00
b) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 2857.16 2857.16 2857.16 2857.16 2857.16 2857.16
Hire charges for Access Scaffolding 23.00 46.00 69.00 92.00 115.00 138.00
Labour charges for scaffolding 156.48 391.22 704.22 1095.48 1564.96 2112.70
Add for MA @ 40% 62.59 156.49 281.69 438.19 625.98 845.08
Lift charges ( Page 131 of Std. Data ) 0.00 62.04 124.07 186.11 248.14 310.18
Add for MA @ 40% 0.00 24.82 49.63 74.44 99.26 124.07
Rate for 1 cum. 3099.23 3537.73 4085.77 4743.39 5510.50 6387.19
Overheads & Contractors Profit @14% 433.89 495.28 572.01 664.07 771.47 894.21
3533.12 4033.01 4657.78 5407.46 6281.97 7281.40
Say 3533.00 4033.00 4658.00 5407.00 6282.00 7281.00
24 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using second
class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm
and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into
mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel,
sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational,
incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, etc.,and Overheads & Contractors profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509) (BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Bricks 2nd class 23x11x7cms 512 Nos. 3381.13 1000 Nos. 1731.14
Cement Mortar (1:4) 0.20 cu.m. 2604.87 1 cu.m. 520.97
water charges @ 1% 0.01 2252.11 22.52
B.LABOUR :
1st class mason 0.60 Nos. 285.00 1 Each 171.00
2nd class mason 0.60 Nos. 260.00 1 Each 156.00
Mazdoor (Unskilled) 2.75 Nos. 215.00 1 Each 591.25
Add for MA @ 40% 0.40 918.25 367.30
Rate for 1 cum 3560.18
Rate for 1 sqm 391.62
Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 391.62 391.62 391.62 391.62 391.62 391.62
Hire charges for Access Scaffolding 5.29 5.29 5.29 5.29 5.29 5.29
Labour charges for scaffolding 35.99 53.99 71.99 89.99 107.98 125.98
Add for MA @ 40% 14.40 21.60 28.80 36.00 43.19 50.39
Lift charges ( Page 131 of Std. Data ) 0.00 91.83 183.65 275.48 367.30 459.13
Add for MA @ 40% 0.00 36.73 73.46 110.19 146.92 183.65
Rate for 1 sqm 447.30 601.06 754.81 908.57 1062.30 1216.06
Overheads & Contractors Profit @14% 62.62 84.15 105.67 127.20 148.72 170.25
Rate per 1 sqm 509.92 685.21 860.48 1035.77 1211.02 1386.31
Say 510.00 685.00 860.00 1036.00 1211.00 1386.00
25 Masonry work in CM(1:6) prop with flyash Cement solid blocks of size 290mm x 225mm x 140mm for
manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , .Gypsum of 5kgs and stone dust
including cost and conveyance of all materials,labour charges,seigniorage charges,scaffolding and curing etc.,and
Overheads & Contractors profit complete with a compressive strength not less than 50 kg/sq.cm for walls
foundation and basement and compound wall (APSS No. 501 & 504).(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for
1 Cum of Masonry 110 Nos 14450.07 1000 Nos 1589.51
Cost of Cement Mortar(1:6) 0.10 cu.m. 1944.87 1 cu.m. 194.49
water charges @ 1% 0.01 1783.99 17.84
B .LABOUR
Mason 1st class 0.42 Nos. 285.00 1 Each 119.70
Mason 2nd class 0.92 Nos. 260.00 1 Each 239.20
Man Mazdoor 0.70 Nos. 215.00 1 Each 150.50
Women Mazdoor 2.10 Nos. 215.00 1 Each 451.50
Add for MA @ 40% 0.40 960.90 384.36
Rate for 1 cum. 3147.09
b) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 3147.09 3147.09 3147.09 3147.09 3147.09 3147.09
Hire charges for Access Scaffolding 23.51 23.51 23.51 23.51 23.51 23.51
Labour charges for scaffolding 159.96 239.96 319.96 399.96 479.91 559.91
Add for MA @ 40% 63.98 95.98 127.98 159.98 191.96 223.96
Lift charges ( Page 131 of Std. Data ) 0.00 96.09 192.18 288.27 384.36 480.45
Add for MA @ 40% 0.00 38.44 76.87 115.31 153.74 192.18
3394.55 3641.08 3887.60 4134.13 4380.58 4627.11
Overheads & Contractors Profit @14% 475.24 509.75 544.26 578.78 613.28 647.80
Rate for 1 cum. 3869.79 4150.83 4431.86 4712.91 4993.86 5274.91
Say 3870.00 4151.00 4432.00 4713.00 4994.00 5275.00
c) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 3147.09 3147.09 3147.09 3147.09 3147.09 3147.09
Hire charges for Access Scaffolding 23.51 47.02 70.53 94.04 117.56 141.07
Labour charges for scaffolding 159.96 399.91 719.87 1119.82 1599.73 2159.64
Add for MA @ 40% 63.98 159.96 287.95 447.93 639.89 863.86
Lift charges ( Page 131 of Std. Data ) 0.00 96.09 192.18 288.27 384.36 480.45
Add for MA @ 40% 0.00 38.44 76.87 115.31 153.74 192.18
3394.55 3888.52 4494.50 5212.47 6042.38 6984.29
Overheads & Contractors Profit @14% 475.24 544.39 629.23 729.75 845.93 977.80
Rate for 1 cum. 3869.79 4432.91 5123.73 5942.22 6888.31 7962.09
Say 3870.00 4433.00 5124.00 5942.00 6888.00 7962.00
26 Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using Flyash lime
solid blocks of size 225mm x 100mm x 60mm having minimum compressive strength of 50 Kg/Sq.cm and using
two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including
cost and seigniorage charges and conveyance of all matyerials and water from approved sources to work site and
all operational and incidental , labour charges such as scaffolding , mixing mortar , constructing masonry , lift
charges , curing etc.and Overheads & Contractors profit complete but excluding cost of steel and its fabrication
charges complete for finished item of work as per SS.509 (BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks 741 Nos. 3214.30 1000 Nos. 2381.80
Cement Mortar (1:4) 0.10 cu.m. 2604.87 1 cu.m. 260.49
water charges @ 1% 0.01 2642.28 26.42
B.LABOUR :
1st class mason 0.60 Nos. 285.00 1 Each 171.00
2nd class mason 0.60 Nos. 260.00 1 Each 156.00
Mazdoor (Unskilled) 2.75 Nos. 215.00 1 Each 591.25
Add for MA @ 40% 0.40 918.25 367.30
Rate for 1 cum 3954.26
Rate for 10 sqm 395.43
Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 395.43 395.43 395.43 395.43 395.43 395.43
Hire charges for Access Scaffolding 5.29 5.29 5.29 5.29 5.29 5.29
Labour charges for scaffolding 35.99 53.99 71.99 89.99 107.98 125.98
Add for MA @ 40% 14.40 21.60 28.80 36.00 43.19 50.39
Lift charges ( Page 131 of Std. Data ) 0.00 91.83 183.65 275.48 367.30 459.13
Add for MA @ 40% 0.00 36.73 73.46 110.19 146.92 183.65
Rate per 1 sqm 451.11 604.87 758.62 912.38 1066.11 1219.87
Overheads & Contractors Profit @14% 63.15 84.68 106.21 127.73 149.26 170.78
Rate per 1 sqm 514.26 689.55 864.83 1040.11 1215.37 1390.65
say 514.00 690.00 865.00 1040.00 1215.00 1391.00
27 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal
(coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and
10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine
aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all
materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and
Overheads & Contractors profit for Bed Blocks & Hold Fasts for finished item of work. (APSS No. 402) (BLD-
CSTN-3-10 & 11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1535.94 1 Cum 1382.35
Sand 0.45 Cum 199.22 1 Cum 89.65
Cement 220.00 Kgs 5.50 1 Kgs 1210.00
Water ( including for curing ) 1.20 Kl 77.00 1 Kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (Unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
Rate for 1 Cum 3532.57
28 Plain Cement Concrete M 25 Design Mix ( by weigh batching ) using 20mm size (SS5) hard granite machine
crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of
13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 380 kgs. of
cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand),
coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering,
shuttering, machine mixing, laying concrete, lift charges, curing etc., complete for finished item of work (APSS No.
402 & 403) for steps (BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1535.94 1 Cum 1382.35
Sand 0.45 Cum 199.22 1 Cum 89.65
Cement 380.00 Kgs 5.50 1 Kgs 2090.00
Water ( including for curing ) 1.20 Kl 77.00 1 Kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (Unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
Rate for 1 Cum 4412.57
29 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 12mm size (SS5) hard granite
machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm ,
20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1
cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering,
machine mixing, laying concrete, vibrating,lift charges, curing etc., and Overheads & Contractors profit complete
for finished item of work (APSS No. 402 & 403) for sill slabs , platforms , shelves. (BLD-CSTN-3-13)
A.MATERIALS :
Cement 330.00 Kgs 5.50 1 Kg 1815.00
12mm HBG graded metal 0.90 Cum 1339.05 1 Cum 1205.15
Sand 0.45 Cum 199.22 1 Cum 89.65
B.LABOUR :
1st class Mason 0.133 Nos 285.00 1 Each 37.91
2nd class Mason 0.267 Nos 260.00 1 Each 69.42
Mazdoor (both men&women) 3.60 Nos 215.00 1 Each 774.00
Add for MA @ 40% 0.40 881.33 352.53
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Needle vibrator 40mm ( petrol ) 1.00 hours 120.40 1 hour 120.40
Add MA @ 25% on crew charges 0.40 221.30 88.52
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 4893.37
a) Sill slabs :
Cost of RCC(1:2:4) 1.00 cum 4893.37 1 cum 4893.37
Rate per 1cum 4893.37
30 Supplying, fitting and placing Fe-500 bar reinforcement in VRCC works complete as per drawings and
technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded
including cost and conveyance of steel, binding wire etc., lifting charges of steel , placing in position, tying with
binding wire, all tools etc., and Overheads & Contractors profit complete for finished item of work ( APSS No.126 )
(BLD-CSTN-4.2)
Unit - 1 MT
a) Material
HYSD bars including 5% for overlaps
and wastage 1.05 MT 41000.00 1 MT 43050.00
Binding wire 6.00 Kgs 55.00 1 Kgs 330.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position
Blacksmith / Barbender 2.00 Nos. 300.00 1 Each 600.00
Mazdoor(Unskilled) 6.40 Nos. 215.00 1 Each 1376.00
Add for MA @ 40% 0.40 1976.00 790.40
46146.40
Unit - 1 MT
a) Material
Mild steel bars including 5% for overlaps
and wastage 1.05 MT 39000.00 1 MT 40950.00
Binding wire 6.00 Kgs 55.00 1 Kgs 330.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position
Blacksmith / Barbender 2.00 Nos. 300.00 1 Each 600.00
Mazdoor(Unskilled) 6.40 Nos. 215.00 1 Each 1376.00
Add for MA @ 40% 0.40 1976.00 790.40
44046.40
32 Ornamental plastering to ceiling 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top
coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and
Overheads & Contractors profit complete for finished item of work. (SS 901,903 & 904) (BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5.50 1 Kgs 145.20
Fine aggregate (Sand) 0.11 Cum 199.22 1 Cum 21.91
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5.50 1 Kgs 79.20
Fine aggregate (Sand) 0.04 Cum 199.22 1 Cum 7.97
B.LABOUR :
1st Class Mason 0.63 Nos. 285.00 1 Each 179.55
2nd Class Mason 1.47 Nos. 260.00 1 Each 382.20
Mazdoor (Unskilled) 3.90 Nos. 215.00 1 Each 838.50
Add for MA @ 40% 0.40 1400.25 560.10
Rate per 10 Sqm 2214.63
Rate per 1 Sqm 221.46
33 Ornamental ceiling plastering 12mm thick single coat in CM(1:5) including cost and conveyance of all
materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials,
and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for finished
item of work.(SS 901,903 & 904) (BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar(1:5) 0.15 Cum 2208.87 1 Cum 331.33
B.LABOUR :
1st Class Mason 0.60 Nos. 285.00 1 Each 171.00
Mazdoor (Unskilled) 0.96 Nos. 215.00 1 Each 206.40
Add for MA @ 40% 0.40 377.40 150.96
Rate per 10 Sqm 859.69
Rate per 1 Sqm 85.97
34 Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM
(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to
site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete
for finished item of work. (SS 901,903 & 904) ( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5.00 1 Kgs 132.00
Fine aggregate (Sand) 0.11 Cum 199.22 1 Cum 21.91
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5.00 1 Kgs 72.00
Fine aggregate (Sand) 0.04 Cum 199.22 1 Cum 7.97
B.LABOUR :
1st Class Mason 0.63 Nos. 285.00 1 Each 179.55
2nd Class Mason 1.47 Nos. 260.00 1 Each 382.20
Mazdoor (Unskilled) 3.90 Nos. 215.00 1 Each 838.50
Add for MA @ 40% 0.40 1400.25 560.10
Rate per 10 Sqm 2194.23
Rate per 1 Sqm 219.42
a) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 219.42 219.42 219.42 219.42 219.42 219.42
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
224.99 247.11 269.24 291.36 313.48 335.60
Overheads & Contractors Profit @14% 31.50 34.60 37.69 40.79 43.89 46.98
Rate per 1 Sqm 256.49 281.71 306.93 332.15 357.37 382.58
Say 256.00 282.00 307.00 332.00 357.00 383.00
b) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 219.42 219.42 219.42 219.42 219.42 219.42
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
224.99 252.15 281.84 314.04 348.76 386.00
Overheads & Contractors Profit @14% 31.50 35.30 39.46 43.97 48.83 54.04
Rate per 1 Sqm 256.49 287.45 321.30 358.01 397.59 440.04
Say 256.00 287.00 321.00 358.00 398.00 440.00
35 Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in
CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc.,
to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges
on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for
finished item of work .(SS 901,903 & 904) (BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.00 Kgs 5.00 1 Kgs 215.00
Fine aggregate (Sand) 0.18 Cum 199.22 1 Cum 35.86
Top coat in CM(1:4) , 4mm thick
Cement 14.50 Kgs 5.00 1 Kgs 72.50
Fine aggregate (Sand) 0.04 Cum 199.22 1 Cum 7.97
B.LABOUR :
1st Class Mason 0.63 Nos. 285.00 1 Each 179.55
2nd Class Mason 1.47 Nos. 260.00 1 Each 382.20
Mazdoor (Unskilled) 3.90 Nos. 215.00 1 Each 838.50
Add for MA @ 40% 0.40 1400.25 560.10
Rate per 10 Sqm 2291.68
Rate per 1 Sqm 229.17
a) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 229.17 229.17 229.17 229.17 229.17 229.17
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
234.74 256.86 278.99 301.11 323.23 345.35
Overheads & Contractors Profit @14% 32.86 35.96 39.06 42.16 45.25 48.35
Rate per 1 Sqm 267.60 292.82 318.05 343.27 368.48 393.70
Say 268.00 293.00 318.00 343.00 368.00 394.00
b) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 229.17 229.17 229.17 229.17 229.17 229.17
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
234.74 261.90 291.59 323.79 358.51 395.75
Overheads & Contractors Profit @14% 32.86 36.67 40.82 45.33 50.19 55.41
Rate per 1 Sqm 267.60 298.57 332.41 369.12 408.70 451.16
Say 268.00 299.00 332.00 369.00 409.00 451.00
36 Plastering 20mm thick single coat in CM(1:5) including cost and conveyance of all materials like cement, sand,
water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational,
incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for finished item of work .(SS
901,903 & 904) (BLD-CSTN-8-8)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar (1:5) 0.21 Cum 2208.87 1 Cum 463.86
B.LABOUR :
2nd Class Mason 0.94 Nos. 260.00 1 Each 244.40
Mazdoor (Unskilled) 1.60 Nos. 215.00 1 Each 344.00
Add for MA @ 40% 0.40 588.40 235.36
Rate per 10 Sqm 1287.62
Rate per 1 Sqm 128.76
a) for basement :
Rate per 1 Sqm 10.00 sqm 128.76 10 sqm 128.76
Overheads & Contractors Profit @14% 0.14 128.76 18.03
Rate per 1 Sqm 146.79
Say 147.00
b) internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 128.76 128.76 128.76 128.76 128.76 128.76
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 5.88 11.77 17.65 23.54 29.42
Add for MA @ 40% 0.00 2.35 4.71 7.06 9.42 11.77
134.33 145.08 155.85 166.60 177.37 188.12
Overheads & Contractors Profit @14% 18.81 20.31 21.82 23.32 24.83 26.34
Rate per 1 Sqm 153.14 165.39 177.67 189.92 202.20 214.46
Say 153.00 165.00 178.00 190.00 202.00 214.00
c) external walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 128.76 128.76 128.76 128.76 128.76 128.76
Hire charges for Access Scaffolding 0.53 1.06 1.59 2.12 2.65 3.18
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 5.88 11.77 17.65 23.54 29.42
Add for MA @ 40% 0.00 2.35 4.71 7.06 9.42 11.77
134.33 150.65 169.51 190.87 214.77 241.17
Overheads & Contractors Profit @14% 18.81 21.09 23.73 26.72 30.07 33.76
Rate per 1 Sqm 153.14 171.74 193.24 217.59 244.84 274.93
Say 153.00 172.00 193.00 218.00 245.00 275.00
37 Plastering 12mm thick single coat in CM(1:5) including cost and conveyance of all materials like cement, sand,
water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational,
incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for finished item of work.(SS
901,903 & 904) (BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar (1:5) 0.15 Cum 2208.87 1 Cum 331.33
B.LABOUR :
1st Class Mason 0.60 Nos. 285.00 1 Each 171.00
Mazdoor (Unskilled) 0.96 Nos. 215.00 1 Each 206.40
Add for MA @ 40% 0.40 377.40 150.96
Rate per 10 Sqm 859.69
Rate per 1 Sqm 85.97
a) for basement :
Rate per 1 Sqm 10.00 sqm 85.97 10 sqm 85.97
Overheads & Contractors Profit @14% 0.14 85.97 12.04
Rate per 1 Sqm 98.01
Say 98.00
b) internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 85.97 85.97 85.97 85.97 85.97 85.97
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 3.77 7.55 11.32 15.10 18.87
Add for MA @ 40% 0.00 1.51 3.02 4.53 6.04 7.55
91.54 99.34 107.15 114.95 122.76 130.56
Overheads & Contractors Profit @14% 12.82 13.91 15.00 16.09 17.19 18.28
Rate per 1 Sqm 104.36 113.25 122.15 131.04 139.95 148.84
Say 104.00 113.00 122.00 131.00 140.00 149.00
c) external walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 85.97 85.97 85.97 85.97 85.97 85.97
Hire charges for Access Scaffolding 0.53 1.06 1.59 2.12 2.65 3.18
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 3.77 7.55 11.32 15.10 18.87
Add for MA @ 40% 0.00 1.51 3.02 4.53 6.04 7.55
91.54 104.91 120.81 139.22 160.16 183.61
Overheads & Contractors Profit @14% 12.82 14.69 16.91 19.49 22.42 25.71
Rate per 1 Sqm 104.36 119.60 137.72 158.71 182.58 209.32
Say 104.00 120.00 138.00 159.00 183.00 209.00
38 Providing impervious coat to exposed RCC roof slab surface with CM(1:3) 20mm thick with 1kg of water
proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage
charges, including conveyannce of materials and including all operational, incidental and labour charges for mixing
mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc.,and
Overheads & Contractors profit complete for finished item of work. (APSS No. 901 & 903).(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar (1:3) 0.21 Cum 3264.87 1 Cum 685.62
Impervious Water proof compound 2.00 Kgs 24.00 1 Kgs 48.00
B.LABOUR :
1st Class Mason 0.66 Nos. 285.00 1 Each 188.10
2nd Class Mason 1.54 Nos. 260.00 1 Each 400.40
Mazdoor (Unskilled) 3.70 Nos. 215.00 1 Each 795.50
Add for MA @ 40% 0.40 1384.00 553.60
Rate per 10 Sqm 2671.22
39 Plain Cement Concrete M 20 nominal mix using 12mm size graded machine crushed hard granite metal(coarse
aggregate) (consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all
charges for mixing, laying concrete in position, curing, lift charges and Overheads & Contractors profit etc., over
RCC roof slab 100mm thick at centre and 40mm thick at ends with an average thickness of 70mm for
finished item of work. (APSS No. 402) (BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 12mm SS5 size metal 0.90 Cum 1339.05 1 Cum 1205.15
Sand 0.45 Cum 199.22 1 Cum 89.65
Cement 330.00 Kgs 5.50 1 Kgs 1815.00
Water ( including for curing ) 1.20 Kl 77.00 1 Kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (Unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
Rate for 1 Cum 3960.36
A.MATERIALS :
Cement Mortar (1:3) 0.15 Cum 3264.87 1 Cum 489.73
Impervious Water proof compound 1.44 Kgs 24.00 1 Kgs 34.56
B.LABOUR :
1st Class Mason 0.60 Nos. 285.00 1 Each 171.00
Mazdoor (Unskilled) 0.96 Nos. 215.00 1 Each 206.40
Add for MA @ 40% 0.40 377.40 150.96
Rate per 10 Sqm 1052.65
41 RCM facia 50mm thick for drop walls,fins with rabbit wire mesh&nomianl reinforcement a directred by Engineer -
In - Charge with dubara sponge finishing,including cost and conveyance of all materials to site,seigniorage
charges,sales&othertaxes on all materials,operationals &incidental,cost and conveyance of cement,wire
mesh,water to work site,centering,scaffolding and form work,lift charges etc.,and Overheads & Contractors profit
complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of
work(APSS NO.403&903) ( BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 12.00 1 sqm 159.60
Cement 319.10 Kgs 5.50 1 Kgs 1755.05
Fine aggregate (Sand) 0.577 cu.m. 199.22 1 Kgs 114.95
Excluding HYSD steel/mild steel &
binding wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 285.00 1 Each 2280.00
Operator concrete mixer 1.00 Nos. 285.00 1 Each 285.00
Mazdoor (Unskilled) 10.00 Nos. 215.00 1 Each 2150.00
Add for MA @ 40% 0.40 4715.00 1886.00
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 2.00 hours 248.40 1 hours 496.80
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 102.96
Rate per 10 Sqm 9230.36
Rate per 10 Sqm 923.04
42 Plain Cement Concrete M 20 nominal mix using 12mm size graded machine crushed hard granite metal(coarse
aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all
charges for mixing, laying concrete in position, curing, lift charges and Overheads & Contractors profit etc., for
finished item of work over PCC / RCC roof slab . (APSS No. 402) (BLD-CSTN-3-11)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm
thick 11.00 Sqm 2044.16 10 Sqm 2248.58
Cement for CM (1:8) proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
Cement for jointing 20.00 Kgs 5.50 1 Kg 110.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Add water charges 1% 0.01 2682.78 26.83
B .LABOUR
Mason 1st class 3.10 Nos 285.00 1 Each 883.50
Mason 2nd class 1.10 Nos 260.00 1 Each 286.00
Mazdoor(un skilled) 0.86 Nos 215.00 1 Each 184.90
Add for MA @ 40% 0.40 1354.40 541.76
Rate for 10sqm 4605.77
a) Flooring :
Rate for other floors FF SF TF 4F 5F 6F
Rate as worked out above 4605.77 4605.77 4605.77 4605.77 4605.77 4605.77
Lift charges ( Page 131 of Std. Data ) 0.00 135.44 270.88 406.32 541.76 677.20
Add for MA @ 40% 0.00 54.18 108.35 162.53 216.70 270.88
4605.77 4795.39 4985.00 5174.62 5364.23 5553.85
Overheads & Contractors Profit @14% 644.81 671.35 697.90 724.45 750.99 777.54
Rate per 10 Sqm 5250.58 5466.74 5682.90 5899.07 6115.22 6331.39
Rate per 1 Sqm 525.06 546.67 568.29 589.91 611.52 633.14
Say 525.00 547.00 568.00 590.00 612.00 633.00
44 Flooring with ceramic tiles 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over
base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement
slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth
mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc.,and
Overheads & Contractors profit complete including seigniorage charges etc., complete for finished item of work.
(APSS No.701 & 707) (BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7.3mm thick of 1st quality
10.50 Sqm 374.00 1 Sqm 3927.00
Cement for CM(1:8) proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White Cement 2.00 Kgs 18.00 1 Kg 36.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Add water charges 1% 0.01 4287.21 42.87
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 6521.78
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7.3mm thick of 1st quality
10.50 Sqm 450.00 1 Sqm 4725.00
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White Cement 2.00 Kgs 18.00 1 Kg 36.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Add water charges 1% 0.01 5085.21 50.85
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 7327.76
46 Flooring / treads with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge
of size not less than 598 mm x 598 mm , 8mm thickness regular finish and normal colours with borders and
design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM
(1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like
consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with
pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white
cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of
base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the
Engineer- in-charge etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No.701 &
707) (BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8mm thick of size not less
than 598mm x 598mm 10.50 Sqm 723.00 1 Sqm 7591.50
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White Cement 6.00 Kgs 18.00 1 Kg 108.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Sand for pointing 0.02 Cum 199.22 1 Cum 3.98
Add water charges 1% 0.01 8027.69 80.28
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 10299.67
47 Flooring / treads with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality and of size as
approved by Engineer-in-charge with borders and design as per the approved flooring pattern as directed by the
Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof
slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately
with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all
materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost
of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar,
laying tiles to required slope as directed by the Engineer- in-charge etc.,and Overheads & Contractors profit
complete for finished item of work. (APSS No.701 & 707) (BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror
polished of all shades) 10.50 Sqm 780.00 1 Sqm 8190.00
Cement for CM(1:8) for base coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
Sand for CM(1:8) 0.20 Cum 199.22 1 Cum 39.84
Add water charges 1% 0.01 8530.14 85.30
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 10807.15
48 Flooring / treads of 0.30m wide with 16 to 18mm thick high polished granite stone slabs other than black
and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders
and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base
coat of cement mortar (1:8) , 20mm thick over CC bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges, dresssing , polishing charges
and seigniorage charges and all other taxes on all materials, cost of base coat and Overheads & Contractors profit
complete for finished item of work (S.S.701 & special) (BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than
black 16 to 18mm thick 10.50 Sqm 2000.00 1 Sqm 21000.00
Cement for CM(1:8) for base coat 36.00 Kgs 5.50 1 Kg 198.00
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing 6.00 Kgs 18.00 1 Kg 108.00
Sand for CM(1:8) 0.20 Cum 199.22 1 Cum 39.84
Add water charges 1% 0.01 21527.34 215.27
B .LABOUR
Mason 1st class 3.00 Nos 285.00 1 Each 855.00
Mason 2nd class 1.00 Nos 260.00 1 Each 260.00
Mazdoor(un skilled) 8.00 Nos 215.00 1 Each 1720.00
Add for MA @ 40% 0.40 2835.00 1134.00
Rate for 10sqm 25711.62
a) Flooring :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 25711.62 25711.62 25711.62 25711.62 25711.62 25711.62
Lift charges ( Page 131 of Std. Data ) 0.00 283.50 567.00 850.50 1134.00 1417.50
Add for MA @ 40% 0.00 113.40 226.80 340.20 453.60 567.00
25711.62 26108.52 26505.42 26902.32 27299.22 27696.12
Overheads & Contractors Profit @14% 3599.63 3655.19 3710.76 3766.32 3821.89 3877.46
Rate per 10 Sqm 29311.25 29763.71 30216.18 30668.64 31121.11 31573.58
Rate per 1 Sqm 2931.12 2976.37 3021.62 3066.86 3112.11 3157.36
Say 2931.00 2976.00 3022.00 3067.00 3112.00 3157.00
49 Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick over
CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including
cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational,
incidental labour & lift charges, dresssing , polishing charges and seigniorage charges and all other taxes on all
materials, cost of base coat and Overheads & Contractors profit complete for finished item of work for platforms
(S.S.701 & special) (BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to
18mm thick 10.50 Sqm 1700.00 1 Sqm 17850.00
Cement for CM(1:8) for base coat 36.00 Kgs 5.50 1 Kg 198.00
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing 6.00 Kgs 18.00 1 Kg 108.00
Sand for CM(1:8) 0.20 Cum 199.22 1 Cum 39.84
Add water charges 1% 0.01 18377.34 183.77
B .LABOUR
Mason 1st class 3.00 Nos 285.00 1 Each 855.00
Mason 2nd class 1.00 Nos 260.00 1 Each 260.00
Mazdoor(un skilled) 8.00 Nos 215.00 1 Each 1720.00
Add for MA @ 40% 0.40 2835.00 1134.00
Rate for 10sqm 22530.12
50 Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed
metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m
and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials
like cement, metal sand and water etc. complete, including seigniorage charges etc.,and Overheads & Contractors
profit complete for finished item of work. (APSS No.701 & 710) (BLD-CSTN-9-13)
Unit : 10sqm
A.MATERIALS :
6mm to 12 mm H.G. Metal (Machine
crushed) 0.17 Cum 1339.05 1 Cum 227.64
Cement 120.00 Kgs 5.50 1 Kgs 660.00
Sand 0.085 Cum 199.22 1 Cum 16.93
Add water charges 1% 0.01 904.57 9.05
B. LABOUR
Mason 1st class 1.25 Nos. 285.00 1 Each 356.25
Mason 2nd class 0.06 Nos. 260.00 1 Each 15.60
Mazdoor (unskiled) 3.00 Nos. 215.00 1 Each 645.00
Add for MA @ 40% 0.40 1016.85 406.74
Rate per 10 Sqm 2337.21
51 Flooring with chequered terrazo tiles of 30mm thick (dark shade) of size 0.305m x 0.305m set over base
coat of cement mortar (1:6), 12 mm thick over CC bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with
pigment of matching shade including cost and conveyance of all materials like cement , sand , water and tiles
etc.,and Overheads & Contractors profit complete including seigniorage charges complete for finished item of
work. (BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred terrazo tiles 30mm thick 10.50 sqm 222.00 1 sqm 2331.00
Cement for CM(1:6) proportion for base
coat 28.80 Kgs 5.50 1 Kgs 158.40
Cement for slurry 33.00 Kgs 5.50 1 Kgs 181.50
Cement for jointing 6.00 Kgs 5.50 1 Kgs 33.00
Sand for CM(1:6) proportion 0.12 Cum 199.22 1 Cum 23.91
B. LABOUR
Mason 2nd class 0.96 Nos. 260.00 1 Each 249.60
Man Mazdoor 2.24 Nos. 215.00 1 Each 481.60
Mazdoor (unskiled) 3.30 Nos. 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1440.70 576.28
Add water charges 1% 0.01 4744.79 47.45
Rate per 10 Sqm 4792.23
52 Providing skirting to internal walls to 15 cm height / risers of steps with Edge cut Rectified ceramic tiles 8 mm
thick length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete
including seigniorage charges etc., and Overheads & Contractors profitcomplete for finished item of work.(APSS
No.701 &707) (BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of Edge cut Rectified ceramic tiles
8 mm thick 10.50 sqm 450.00 1 sqm 4725.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 6.00 Kgs 18.00 1 Kg 108.00
Add water charges 1% 0.01 5228.49 52.28
B.LABOUR
Mason 1st class 0.77 Nos. 285.00 1 Each 219.45
Mazdoor(unskilled) 0.80 Nos. 215.00 1 Each 172.00
Add for MA @ 40% 0.40 391.45 156.58
Rate per 10 Sqm 5828.80
53 Providing skirting to internal walls to 15 cm height / risers of steps with vitrified tiles 8mm to 10mm thick ,
normal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and
Overheads & Contractors profit complete including seigniorage charges etc., complete for finished item of work.
(APSS No.701 &707)(BLD-CSTN-9-20)
Unit = 10 sqm
A.MATERIALS :
Cost of vitrified tiles 8 to 10mm thick 10.50 sqm 723.00 1 sqm 7591.50
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 2.00 Kgs 18.00 1 Kg 36.00
Add water charges 1% 0.01 8022.99 80.23
B.LABOUR
Mason 1st class 0.96 Nos. 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos. 260.00 1 Each 582.40
Mazdoor(unskilled) 3.30 Nos. 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10 sqm 10294.92
54 Providing cladding to internal walls / skirting to internal walls to 15 cm height / risers of steps with 8mm
thick mirror polished granite tiles length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand
and water etc., and Overheads & Contractors profit complete including seigniorage charges etc., complete for
finished item of work.(APSS No.701 &707)(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
Cost of granite tiles 8mm thick 10.50 sqm 780.00 1 sqm 8190.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 5.00 Kgs 18.00 1 Kg 90.00
Add water charges 1% 0.01 8675.49 86.75
B.LABOUR
Mason 1st class 2.10 Nos. 285.00 1 Each 598.50
Mason 2nd class 4.90 Nos. 260.00 1 Each 1274.00
Mazdoor(unskilled) 0.80 Nos. 215.00 1 Each 172.00
Add for MA @ 40% 0.40 2044.50 817.80
Rate for 10 sqm 11624.54
55 Providing skirting to internal walls to 12.50 cm height / risers of steps with Polished Shahabad/Tandur
stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand
and water etc., complete including seigniorage charges etc.,and Overheads & Contractors profit complete for
finished item of work.(APSS No.701 &707) (BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 2044.16 10 sqm 2248.58
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
Add water charges 1% 0.01 2644.06 26.44
B.LABOUR
Mason 1st class 0.96 Nos. 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos. 260.00 1 Each 582.40
Mazdoor(unskilled) 3.10 Nos. 215.00 1 Each 666.50
Add for MA @ 40% 0.40 1522.50 609.00
Rate for 10 sqm 4802.00
56 Providing cladding to walls / skirting to internal walls / risers of steps with High Polished Granite 16 to 18
mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring stones set over
base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per
sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and Overheads &
Contractors profit complete for finished item of work.(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2000.00 1 sqm 21000.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 5.00 Kgs 18.00 1 Kg 90.00
Machine cutting charges
(S.No.822/BMM-V-12) 67.67 RM 8.00 1 RM 541.36
Add water charges 1% 0.01 22026.85 220.27
B.LABOUR
Mason 1st class 2.10 Nos. 285.00 1 Each 598.50
Man Mazdoor(Beldar) 4.90 Nos. 215.00 1 Each 1053.50
Add for MA @ 40% 0.40 1652.00 660.80
Rate for 10 sqm 24559.91
57 Cladding to walls / skirting to internal walls / risers to steps with 16mm to 18mm thick high polished
granite slabs black colour as approved by Engineer-in-charge of length not less than 2.43m set over base
coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., and Overheads & Contractors profit complete including
seigniorage charges etc., complete for finished item of work.(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite black 10.50 sqm 1700.00 1 sqm 17850.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 5.00 Kgs 18.00 1 Kg 90.00
Machine cutting charges
(S.No.822/BMM-V-12) 67.67 RM 8.00 1 RM 541.36
Add water charges 1% 0.01 18876.85 188.77
B.LABOUR
Mason 1st class 2.10 Nos. 285.00 1 Each 598.50
Man Mazdoor(Beldar) 4.90 Nos. 215.00 1 Each 1053.50
Add for MA @ 40% 0.40 1652.00 660.80
Rate for 10 sqm 21378.41
58 Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by
Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade
to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage
charges etc., and Overheads & Contractors profit complete for finished item of work. (BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles 10.50 sqm 332.00 1 sqm 3486.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 6.00 Kgs 18.00 1 Kg 108.00
Add water charges 1% 0.01 3989.49 39.89
B.LABOUR
Mason 1st class 0.77 Nos. 285.00 1 Each 219.45
Mazdoor(unskilled) 0.80 Nos. 215.00 1 Each 172.00
Add for MA @ 40% 0.40 391.45 156.58
Rate for 10 sqm 4577.41
59 Providing and laying cinder concrete in cement, cinder mix (1:15) prop. using 12.5mm nominal size cinder
laid in layers and compacted as directyed for filling sunken floors including cost and conveyance of all materials
, water to work site , seigniorage charges and all operational , incidental , labour charges , such as mixing cement
& cinder etc., and Overheads & Contractors profit complete for finished item of work. (APSS. No. 402) (BLD-
CSTN-17-10)
A.MATERIALS :
Cost of cinder (BMT-A.17/ PAGE-11) 1.00 Cum 495.00 1 Cum 495.00
Cement 95.00 Kgs 5.50 1 Kg 522.50
B.LABOUR :
1st class Mason 0.10 Nos 285.00 1 Each 28.50
Mazdoor (unskilled) 2.36 Nos 215.00 1 Each 507.40
Add for MA @ 40% 0.40 535.90 214.36
Basic cost per 1cum 1767.76
60 Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 40mm size
(SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials
like cement, fine aggregate (sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all
materials including centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel
centering plates etc.,shuttering machine mixing, laying concrete, lift charges curing etc., and Overheads &
Contractors profit complete as per drawings but excluding cost of steel and it's fabrication charges for finished item
of work (APSS NO. 402 & 403) for Dummy columns. (BLDS-CSTN-3-13)
A.MATERIALS :
Cement 129.60 Kgs 5.50 1 Kg 712.80
40mm HBG metal 0.90 Cum 1166.55 1 Cum 1049.90
Sand 0.45 Cum 199.22 1 Cum 89.65
B.LABOUR :
1st class Mason 0.133 Nos 285.00 1 Each 37.91
2nd class Mason 0.267 Nos 260.00 1 Each 69.42
Mazdoor (unskilled) 3.60 Nos 215.00 1 Each 774.00
Add for MA @ 40% 0.40 881.33 352.53
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Needle vibrator 40mm ( petrol ) 1.00 hour 120.40 1 hour 120.40
Add MA @ 25% on crew charges 0.40 221.30 88.52
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 3635.92
62 Supply and fixing of stainless steel (304 grade) hand railing as per approved drawing with top rail of 63 mm
dia. & 2 mm thick, vertical postsl of 50 mm dia and 2 mm thick and 20 mm dia. & 2 mm thick and two rows of 15
mm dia. & 1.6 mm thick medium class pipes including fixing verticals to 75 mm dia. base plates using bonding
agent and anchor fastner and welding including fixing railing, buffing, polishing all members of the railing
thouroughly, lacquer finishing to presement seamless finish including cost and conveyance of all materials,
welding charges cost of all consumables, labour charges etc., and Overheads & Contractors profit complete for
finished item of work.
63 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure
of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other accessories and
fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site,
operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors
profit complete for finished item of work. (APSS No. 1328)
64 White washing two coats with Suryacem to ceiling to give an even shade after thouroughly brushing the
surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges
and incidental such as scaffolding , lift charges etc., and Overheads & Contractors profit complete for finished item
of work but excluding conveyance of materials.(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
Surya cement 2.00 kgs 350.00 25 kgs 28.00
B.LABOUR :
Painter 1st class 0.063 Nos. 285.00 1 Each 17.96
Painter 2nd class 0.147 Nos. 260.00 1 Each 38.22
Mazdoor(unskilled) 0.32 Nos. 215.00 1 Each 68.80
Add for MA @ 40% 0.40 124.98 49.99
Sundries including brushes , ladders
etc., @ 1% 1% 202.97 2.03
Rate per 10 sqm 204.99
Overheads & Contractors Profit @14% 0.14 204.99 28.70
Rate per 10 sqm 233.69
Rate per 1 sqm 23.37
Say 23.00
65 Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper Acrylic based
(Asian/Berger/Nerolac/Saicoat/Indocem) over a base coat of cement primer water based interior Gr-1
(Asian/Berger/Nerolac/Saicoat/Indocem) as approved by Engineer-In-Charge, making 3 coats in all to give an
even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials,
including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and
Overheads & Contractors profit complete for finished item of work as per APSS 911 for internal walls. (BLD-CSTN-
12-1)
Unit = 10 Sqm
Cost of cement primer(BMT-J.01) 0.50 Ltrs 100.00 1 Ltr 50.00
Painter 1st class 0.08 Nos. 285.00 1 Each 22.80
Painter 2nd class 0.19 Nos. 260.00 1 Each 49.40
Cost of washable oil bound distemper 1.70 Ltrs 60.00 1 Ltr 102.00
Painter 1st class 0.36 Nos. 285.00 1 Each 102.60
Painter 2nd class 0.84 Nos. 260.00 1 Each 218.40
Add for MA @ 40% 0.40 393.20 157.28
Sundries including brushes , ladders
etc., @ 1% 0.01 702.48 7.02
709.50
Overheads & Contractors Profit @14% 0.14 709.50 99.33
Rate per 10 sqm 808.84
Rate per 1 sqm 80.88
Say 81.00
66 Painting to old walls with 2 coats of ready mixed oil bound wahsable distemper Acrylic based
(Asian/Berger/Nerolac/Saicoat/Indocem) as approved by Engineer-In-Charge, to give an even shade after
thourughly brushing the old surface to remove all dirt and remains of loose powdered materials, including cost and
conveyance of all materials to work site and all operational, incidental, labour charges etc., and Overheads &
Contractors profit complete for finished item of work as per APSS 911 for internal walls. (BLD-CSTN-11-10)
Unit = 10 Sqm
Cost of washable oil bound distemper 1.70 Ltrs 60.00 1 Ltr 102.00
Painter 1st class 0.36 Nos. 285.00 1 Each 102.60
Painter 2nd class 0.84 Nos. 260.00 1 Each 218.40
Add for MA @ 40% 0.40 321.00 128.40
Sundries including brushes , ladders
etc., @ 1% 0.01 551.40 5.51
556.91
Overheads & Contractors Profit @14% 0.14 556.91 77.97
Rate per 10 sqm 634.88
Rate per 1 sqm 63.49
Say 63.00
67 Painting to new walls with 2 coats of water proof cement paint (Snowcem/Indocem) of shade as approved by
the Engineer-In-Charge over a base coat of aproved cement primer waterbase interior Gr-1
(Asian/Berger/Nerolac/Saicoat/Indocem)making 3 coats in all to give an even shade after thourughly brushing the
surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials
to work site and all operational, incidental, labour charges etc., and Overheads & Contractors profit complete for
finished item of work as per SS 912 .(BLD-CSTN-12-1 & 12-5)
68 Painting to old walls with 2 coats of water proof cement paint (Snowcem/Indocem) of shade as approved by
the Engineer-In-Charge to give an even shade after thourughly brushing the surface to remove all dirt and remains
of loose powdered materials, including cost and conveyance of all materials to work site and all operational,
incidental, labour charges etc., and Overheads & Contractors profit complete for finished item of work as per SS
912.(BLD-CSTN-12-4 )
69 Painting with plastic emulsion (Asian/Berger/Nerolac/Saicoat/Indocem) to exterior / interior faces of new walls
two coat of approved make shade and colour over primer coat with cement primer water based interior Gr-I
( Asian/Berger/Nerolac/Saicoat/Indocem) including cost and conveyance of materials like Plastic Emulsion paint,
white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as
preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work
(APSS No.910, 911&1201) in all floors. (BLD-CSTN-12-2& 12-11-187)
70 Painting to new wood work and flush shutters with lappam finish , over a primary coat
( Asian/Berger/Nerolac/Saicoat/Indocem) and painting two coats of synthetic enamel paint Grade-I
(Asian/Berger/Nerolac/Indocem) of approved shade including cost and conveyance of all materials to site cost of
primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish
including sales & other taxes on cost of all materials etc.and Overheads & Contractors profit complete (APSS
No.1200, 1207 & 1211) in all floors.(BLD-CSTN-12-6 & 12-12-195)
72 Painting primer coat on new wood work using red oxide Iron primer paint grade - I of approved brand
including cost and conveyance of all materials to site , all labour charges etc.and Overheads & Contractors profit
complete in all floors.(APSS No. 1201, 1212 & 1207).(BLD-CSTN-12-7)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 90.00 1 Ltr 63.00
B.LABOUR :
1st Class Painter 0.21 Nos. 285.00 1 Each 59.85
2nd Class Painter 0.49 Nos. 260.00 1 Each 127.40
Add for MA @ 40% 0.40 187.25 74.90
Sundries including brushes , ladders
etc., @ 1% 0.01 325.15 3.25
328.40
Overheads & Contractors Profit @14% 0.14 328.40 45.98
Rate per 10 sqm 374.38
Rate per 1 sqm 37.44
Say 37.00
73 Painting two coats with synthetic enamel paint Gr-I ( Asian/Berger/Nerolac/Indocem) to new iron work
including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour
charges etc.,and Overheads & Contractors profit complete for finished item of work. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 1.10 Ltr 170.00 1 Ltr 187.00
B.LABOUR :
1st Class Painter 0.33 Nos. 285.00 1 Each 94.05
2nd Class Painter 0.77 Nos. 260.00 1 Each 200.20
Add for MA @ 40% 0.40 294.25 117.70
Sundries including brushes , ladders
etc., @ 1% 0.01 598.95 5.99
604.94
Overheads & Contractors Profit @14% 0.14 604.94 84.69
Rate per 10 sqm 689.63
Rate per 1 sqm 68.96
Say 69.00
74 Painting two coats with synthetic enamel paintGr-I ( Asian/Berger/Nerolac/Indocem) to old iron work
including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour
charges etc.,and Overheads & Contractors profit complete for finished item of work. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-198)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 0.90 Ltr 170.00 1 Ltr 153.00
B.LABOUR :
1st Class Painter 0.33 Nos. 285.00 1 Each 94.05
2nd Class Painter 0.77 Nos. 260.00 1 Each 200.20
Add for MA @ 40% 0.40 294.25 117.70
Sundries including brushes , ladders
etc., @ 1% 0.01 564.95 5.65
570.60
Overheads & Contractors Profit @14% 0.14 570.60 79.88
Rate per 10 sqm 650.48
Rate per 1 sqm 65.05
Say 65.00
75 Supply and application of two coats of Altek/Sai coat/Neon Super fine, one coat of Altek/Sai coat/Neon water
based cement primer and two coats of Altek Flora/Sai Coat/Neon/Indocem Super track for ceiling and internal
walls (emulsion paint) including cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc.,and Overheads & Contractors profit complete for finished item of work
76 Supply & application of One Coat Water based Cement Primer, One coat of Deco Orient Base Exterior
Texture & two coats of Alltek Harmony (Acrylic Emulsion paint exterior grade) for external walls including
cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges
etc.,and Overheads & Contractors profit complete for finished item of work
77 Supply & Application of One Coat of Altek / Sai coat / Neon / Indocem Water Based Cement Primer & Two
Coats of Altek Alltimate / Sai coat / Neon weather flex for exterior walls (Acrylic Emulsion Paint Exterior
grade) including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all
labour charges etc.,and Overheads & Contractors profit complete for finished item of work
78 Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and
applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean &
wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs,
sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No
emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved
brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of
approved brand melamine including cost & labour charges , emery papers, cost of thinner & melamine polish of
approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent
etc.,Overheads&Contractror profit complete for finished item of work
Rate as per SSR (2008-09) - S.No.384 1.00 sqm 356.00 1.00 sqm 356.00
Overheads & Contractors Profit @14% 0.14 356.00 49.84
Rate per 1 sqm 405.84
Say 406.00
79 Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-
Charge including cost and conveyance of materials to site and labour charges etc., Overheads & Contractors
profit complete for finished item of work in all floors.
Cost of 50mm thick jali 1.00 sqm 335.00 1 sqm 335.00
1st class mason 0.06 Nos. 285.00 1 Each 17.10
2nd class mason 0.14 Nos. 260.00 1 Each 36.40
Mazdoor(unskilled) 0.50 Nos. 215.00 1 Each 107.50
Add for MA @ 40% 0.40 161.00 64.40
560.40
Overheads & Contractors Profit @14% 0.14 560.40 78.46
Rate per 1 sqm 638.86
Say 639.00
80 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together
through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft
of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates
and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs
complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., Overheads &
Contractors profit complete for finished item of work as per special spn: 1108
81 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre
,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the
collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for
the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers,
handles, all accessories all fixtures and painted with one coat of approved steel primer etc., Overheads &
Contractors profit complete for finished item of work as per special spn 1105
82 Providing Expansion joint treatment with poly sulphide compound of approved make of finished size 25 x
12mm including making of 25mm x 12mm groove and primer coat over finished groove with finishing of edges true
to straight line and level over the finished surface of expansion joint including cost and conveyance of all materials
to site, all incidental, operational, labour charges etc.Overheads & Contractors profit complete for finished item of
work as per approved drawing (for all floors on top of slab i.e in the flooring and for internal vertical joints of
grooves in dadooing surface)
As per market rate 1.00 RM 370.00 1 RM 370.00
Rate per 1 RM Say 370.00
83 Providing and fixing of Expansion joint filler board for Buildings , Columns , Beams and Slabs " Armour
Board " Sillfill 25mm thick including cost and conveyance of all materials to site, all incidental, operational,
labour charges etc.Overheads & Contractors profit complete for finished item of work as per approved drawing for
all floors
Rate as per SSR - 830 (BMT-U.05) 1.00 Sqm 327.00 1 Sqm 327.00
Overheads & Contractors Profit @14% 0.14 327.00 45.78
Rate per 1 sqm 372.78
Say 373.00
1.70mts 1.80mts Alround M.S flat of
84 Providing and fixing of 24 gauge alluminium sheet over expansion joint groove size of
25 width
x 6mm15cm fixed to walls /
columns at one edge and resting over the other block walls/columns concealing expansion joint with slotted holes
for free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished surface of
expansion joint and wall face using sheet metal screws with nylon receiver complete including cost and
conveyance of all materials to site, all incidental, operational, labour charges etc.Overheads & Contractors profit
complete for finished item of work as per approved drawing (for all floors for vertical joints and bottom of slab)
85 Supplying and fixing aluminium composite cladding 4mm thick of approved make (Alucopanel, alucobonel,
Reynobond, Lennox Durabuid, Alstrong legame, Alpolic, Alcomat, Alshine etc.,) with skin material 0.25 mm thick
aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis
frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on
structural steel work including necessary accessories complete in all respects including all scaffolding and labour
charges etc., Overheads & Contractors profit complete for finished item of work but excluding cost of structural
steel fabrication, if any,
Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used.
Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive
of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc.
and scaffolding charges, form work etc. Overheads & Contractors profit complete for finished item of work.
87 Providing and Fixing Top Hung shutters (NCL or equivalent) in Structural Glazing fabricated from Roll
formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as
per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of
304 grade stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour
coated steel/powder coated sections as per the design requirement. Design calculations are made to suit wind
pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd
backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The outer frame
should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm, stiffener section
should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2 Nos. for
each shutter, Aluminium Handle – 1 no. for each shutter. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding charges, form work etc. complete for finished item
of work.(The rate is inclusive of Overheads&Contractor profit)
Rate as per SSR S.No.797 (BMT-
Q.08) 1.00 sqm 4226.00 1 sqm 4226.00
Overheads & Contractors Profit @14% 0.14 4226.00 591.64
Rate per 1 sqm 4817.64
Say 4818.00
88 Supply and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.6 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick,
finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer.
Section for outer frame should be 46 x 52 mm, section for mullion should be 46 x 70 mm and section for beading
should be 18 x 25 mm. The Glazing should be paneled with 5 mm thick plain float Glass with Ethyl Propylene
diameine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket. Centre
mullions are to be fixed suing mullion cap. Handle made of high grade Aluminium powder coated and nylon
receiver. Gaskets made of Ethyl propylene Diamine Monomer (EPDM) Corner brackets made of CRCA with zinc
phosphating. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete / masonry
wall be means of self expanding screws. & complete for finished item.(The rate is inclusive of
Overheads&Contractor profit)
Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm), 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x 4'-0" (914.4x1219.2mm) grid
outer frames section size of 46 x 52 mm
Rate as per SSR S.No.797 (BMT-
Q.08) 1.00 sqm 4317.00 1 sqm 4317.00
Overheads & Contractors Profit @14% 0.14 4317.00 604.38
Rate per 1 sqm 4921.38
Say 4921.00
89 Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling
system manufactured by M/s Arm strong world Industries using hot dipped Galvanized Steel section exposed
surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched
cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and
wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c
in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm
thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished
of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of
standing of frame work exposing roof making complete for finished item of work.(The rate is inclusive of
Overheads&Contractor profit)
Rate as per S.No.592 of SSR 2008-09 1.00 sqm 720.00 1 sqm 720.00
Overheads & Contractors Profit @14% 0.14 720.00 100.80
820.80
Say 821.00
90 Providing and fixing of 75mm thick EVEREST SOLID WALL PANEL Sandwich panels made of light Weight
FRACC two 4mm thick non-asbestos fiber reinforced cement sheets on either side of the lightweight concrete core
composed of Portland cement binders with tongue and groove arrangement. The bottom of the panel shall be
fixed to the floor channel made up of 1 mm thick GI channels of size 14x75x25 mm fixed to the existing floor with
6x60mm nylon self expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of
1mm thick GI Channel of size 38x75x38mm duly fixed to the existing ceiling with 6x60mm nylon self expansion
screws at 600 mm C/C. All the tongue and groove joints of the panels have to be properly cleaned and both the
panels have to be fixed by applying the mixture of fly ash and sodium silicate in between and Everest jointing
compound all the exposed joints. The rate includes cost of 75mm EVEREST SOLID WALL PANEL panels, Gl
Floor and ceiling channel. The panels can be flushed by using paper tape and Everest jointing compound all
complete.(The rate is inclusive of Overheads&Contractor profit)
Rate as per SSR S.No.614 (BMT-
M.71) 1.00 sqm 1722.00 1 sqm 1722.00
Overheads & Contractors Profit @14% 0.14 1722.00 241.08
Rate per 1 sqm 1963.08
Say 1963.00
91 Roofing with corrugated GI sheets as per IS 277 (1.25mm thick) fixed with GI 'J' bolts&nuts 8mm dia. With
bitumen & GI limpet washers filled with white lead including a coat of approved steel primer and two coats of
approved paint on over lapping of sheets complete ( up to a pitch of 60 degees ) and seigniorage charges , turn
over tax etc., complete excluding the cost of purlins, rafters , trusses including cost and conveyance of all
materials , Overheads & Contractors profit for finished item of work.(BLD-CSTN-10-3)
92 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS
Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational,
incidental, labour charges , Overheads & Contractors profit for finished item of work.etc., complete for finished item
of work for stair case head room roof.
Contractor Profit @
Contractor Profit @
Contractor Profit @
Contractor Profit @
Unloading Charges
charges excluding
charges including
Lead in KM
Loading Charges
Source of supply
Seigniorage
Conveyance
Conveyance
S.S.R Sl.no
Intial Cost
excluding
excluding
charges
14%
14%
14%
14%
Unit
Sl.No Description of Item
MR CT Total
Champavathi
1 Fine Sand (Screened) 28 1 CUM 425.00 203 0 203 1667.70 1462.89 0.00 10.18 5.09 2.04
River
Champavathi
2 Fine Sand (Unscreened) 27 1 CUM 325.00 203 0 203 1667.70 1462.89 0.00 10.18 5.09 2.04
River
Champavathi
Coarse Sand for mortor M-005 1 CUM 325.00 203 0 203 1667.70 1462.89 0.00 10.18 5.09 2.04
River
Champavathi
3 Coarse Sand (for filling) M-004 1 CUM 250.00 203 0 203 1667.70 1462.89 0.00 10.18 5.09 2.04
River
4 Ambativalasa M-008 1 CUM 80.00 0 0 0 0.00 0.00 20.00 10.18 5.09 2.04
Gravel (M-008)
5 Ambativalasa M-055 1 CUM 745.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
40mm Nominal size
6 Ambativalasa M-054 1 CUM 1155.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
25mm Nominal size
7 Ambativalasa M-053 1 CUM 1175.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
20mm Nominal size
8 Ambativalasa M-052 1 CUM 980.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
12.5mm Nominal size
9 Ambativalasa M-051 1 CUM 820.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
10mm Nominal size
10 Ambativalasa M-050 1 CUM 655.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
6mm Nominal size
11 Ambativalasa M-040 1 CUM 750.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
5 to 10mm size
12 Ambativalasa 67 1 CUM 310.00 83 0 83 719.70 631.32 45.00 20.35 10.18 4.07
<2.36mm
13 Ambativalasa 10 1 CUM 560.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
80-40mm size
14 40-20mm size Ambativalasa 9 1 CUM 975.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
15 20-10mm size Ambativalasa 8 1 CUM 1025.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
16 10-4.75mm size Ambativalasa 7 1 CUM 750.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
17 Stones chips at Quarry Ambativalasa 67 1 CUM 310.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
18 Uncoursed Rubble stones at Quarry Marupalli 79 1 CUM 230.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
19 Coursed Rubble stone 30x30x45cm Marupalli 13 1 CUM 370.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
20 Coursed Rubble Stone 30x30x60cm Marupalli 14 1 CUM 333.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
21 Through Stones 20x20x30cm long Marupalli 75 1 CUM 1583.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
22 Through Stones 20x20x45cm long Marupalli 75 1 CUM 1056.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
23 Through Stones 25x25x45cm long Marupalli 76 1 CUM 1138.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
24 Through Stones 25x25x60cm long Marupalli 76 1 CUM 720.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
25 Through Stones 30X30X65cm long Marupalli 77 1 CUM 650.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
26 Through Stones 30X30X75cm long Marupalli 77 1 CUM 667.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
27 Rough Stone 20x20x75cm Marupalli 64 1 CUM 433.00 83 0 83 719.70 631.32 0.00 20.35 10.18 4.07
Net Total
1905.20
1805.20
1805.20
1730.20
117.30
1410.91
1820.91
1840.91
1645.91
1485.91
1320.91
1415.91
1020.91
1225.91
1640.91
1690.91
1415.91
975.91
895.91
1035.91
998.91
2248.91
1721.91
1803.91
1385.91
1315.91
1332.91
1098.91
5600.00
43000.00
42000.00
5220.05
4135.05
1048.89
1037.89
1037.89
Name of the Work:
COMMON SSR 2011-12
Reference
Sl. S.No./ Item Rate
Items to SSR per
No Code No. (Rs.)
page
LABOUR CHARGES
1 1st class mason 229 I -11 285.00 1 Each
2 2nd class mason 230 II - 35 260.00 1 Each
3 Mazdoor(unskilled)/Heavy Mazoor/Light
Mazdoor 230 III - 3 215.00 1 Each
4 1st class Painter 229 I - 35 285.00 1 Each
5 2nd class Painter 230 II - 37 260.00 1 Each
6 1st class carpenter 229 I -4 285.00 1 Each
7 2nd class carpenter 230 II - 4 260.00 1 Each
8 Bar bender / Blacksmith 229 I -1 &2 300.00 1 Each
9 Operator concrete mixer 229 I -16 285.00 1 Each
10 Labour charges for fabricating steel
works like Window Grills, Compound
Wall Grills, Iron Doors, Windows 69 BMM-V.14 16.00 1 Kg
including cost of welding rods, power
11 Labour charges for fixing Iron Doors,
charges, excluding cost of fixing in
Iron Windows and Window Grills in
position
position
69 BMM-V.15 3.00 1 Kg
Cost of Materials :
10 Binding wire 233 3 55.00 1 Kg
11 SSR2009-
White cement 10 BMM-V.23 18.00 1 Kg
12 Polished Shahabad/Tandur stone slabs
15mm to 18mm thick LC 2044.16 10 sqm
13 Ceramic Tiles Non-skid variety 7.3 m
thick of all shades 12 BMT-C.01 374.00 1 Sqm
14 Edge Cut - Rectified Ceramic tiles 8mm
thick 12 BMT-C.02 450.00 1 Sqm
15 Vitrified tiles of size not less than
598mm x 598mm , 8mm thickness
regular finish and normal colours 12 BMT-C.16 723.00 1 Sqm
16 Granite stone tiles 8mm thick (mirror
polished of all shades) 12 BMT-B.16 780.00 1 Sqm
17 Glazed coloured tiles for Dadooing 12 BMT-C.07 332.00 1 Sqm
18 Cement primer water based grade - I 23 BMT-J-01 100.00 1 Kg
19 Ready made primer for Wood 24 BMT-J.05 100.00 1 Ltr
20 Red oxide Primer Paint Grade-I 23 BMT-J.03 90.00 1 Ltr
21 Oil bound Washable Distemper Acrylic
based 24 BMT-J.21 60.00 1 Kg
22 Plastic Emulsion paint 24 BMT-J.22 180.00 1 Ltr
23 Synthetic enamel paint 24 BMT-J.30 170.00 1 Ltr
24 Linseed Oil 24 BMT-J.11 40.00 1 Ltr
25 Suryacem or equivalent quality 24 BMT-J.27 350.00 25 Kgs
26 Water proof cement paint 24 BMT-J.24 35.00 1 Kg
27 French Polish 24 BMT-J.14 132.00 1 Ltr.
28
PVC pipes 110mm dia.(2.5Kgs/sq.cm) 294 19-1 78.00 1 RM
29
PVC bends of 87.5 degrees 101 BMW-G.57 65.00 1 Each
30 PVC Clamps 102 BMW-G.106 14.00 1 Each
31 PVC collar 102 BMW-G.93 45.00 1 Each
32 Rabbit wire mesh (chicken mesh) 18 BMT-F.28 12.00 1 Sqm
33 Cement Jally 50mm thick 70 BMS-W.17 335.00 1 Sqm
34 Cement LC 5500.00 1 MT
35 Cement LC 5.50 1 Kg
36 Reinforcement steel - TMT LC 41000.00 1 MT
37 Mild steel bars LC 39000.00 1 MT
38 Coarse sand for mortar LC 199.22 1 Cum
39 Coarse sand for filling LC 414.67 1 Cum
40 Coarse aggregate 40mm LC 1166.55 1 Cum
41 Gravel LC 388.27 1 Cum
42 Bricks 2nd class LC 3653.39 1000 Nos.
43 Water 250 M - 189 77.00 1 KL
43 Graded 20mm Metal 1535.94 1 Cum
Graded 13.20/12.50 to 6mm Metal 1339.05 1 Cum
44 Rolling Shutter (80x1.25mm) 18 BMT-F.29 2000.00 1 Sqm
45 Collapsable steel shutters 18 BMT-F.30 1750.00 1 Sqm
46 Chequrred terrazo tiles 30mm thick,
dark shade (0.305m x 0.305m) 15 BMT-D.04 222.00 1 Sqm
47 Flat nosing Shahabad/Kadapa slabs of
any thickness 69 BMM-V.13 10.00 1 RM
48 Impervious Water proof compound 20 BMT-H.01 24.00 1 Kg
Cost of MS Tube (BMT-F.04) BMT-F.04 45.00 1 kg
Reference Hire, Fuel
S.No./ Item Crew
Machinery Charges to SSR & Crew
Code No. charges
page charges
B) Plastering to walls
a) 1st floor Page 77 0.53 3.6 1 Sqm
b) 2nd floor 0.53 5.40 1 Sqm
c) 3rd floor 0.53 7.20 1 Sqm
d) 4th floor 0.53 9.00 1 Sqm
e) 5th floor 0.53 10.80 1 Sqm
f) 6th floor 0.53 12.60 1 Sqm
g) 7th floor 0.53 14.40 1 Sqm
i) 8th floor 0.53 16.20 1 Sqm
gj 9th floor 0.53 18.00 1 Sqm
Cellar /up
to plinth 2nd 8th 9th
3rd Floor 4th Floor 5th Floor 6th Floor 7th Floor
level / 1st Floor Floor Floor
Floor
a) Footings, Bed blocks, Steps Page 75 59.00 330.00 363.00 396.00 429.00 462.00 495.00 528.00 561.00 594.00 1 Cum
d) Lintels Page 78 843.00 675.00 742.50 810.00 877.50 945.00 1012.50 1080.00 1147.50 1215.00 1 Cum
e) RCC roof slabs upto 150 mm depth -- do -- 143.00 89.00 97.90 106.80 115.70 124.60 133.50 142.40 151.30 160.20 1 Sqm
f) RCC slabs upto 150-300 mm depth -- do -- 149.00 93.00 102.30 111.60 120.90 130.20 139.50 148.80 158.10 167.40 1 Sqm
g) Sunshades of any width -- do -- 167.00 104.00 114.40 124.80 135.20 145.60 156.00 166.40 176.80 187.20 1 Sqm
h) Columns -- do -- 127.00 948.00 1042.80 1137.60 1232.40 1327.20 1422.00 1516.80 1611.60 1706.40 1 Cum
i) Beams -- do -- 1276.00 795.00 874.50 954.00 1033.50 1113.00 1192.50 1272.00 1351.50 1431.00 1 Cum
59 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 7.32M -Steel scaffolding pipes , jack props , wallers Foot plates , brackets , steel
centering plates etc.
a) Lintels -- do -- 1519.00 1064.00 1170.40 1276.80 1383.20 1489.60 1596.00 1702.40 1808.80 1915.20
1 Cum
b) RCC roof slabs upto 150 mm depth -- do -- 258.00 141.00 155.10 169.20 183.30 197.40 211.50 225.60 239.70 253.80
1 Sqm
c) RCC slabs upto 150-300 mm depth -- do -- 268.00 146.00 160.60 175.20 189.80 204.40 219.00 233.60 248.20 262.80
1 Sqm
d) Sunshades of any width -- do -- 300.00 163.00 179.30 195.60 211.90 228.20 244.50 260.80 277.10 293.40
1 Sqm
e) Columns -- do -- 229.00 1494.00 1643.40 1792.80 1942.20 2091.60 2241.00 2390.40 2539.80 2689.20
1 Cum
f) Beams -- do -- 2300.00 1253.00 1378.30 1503.60 1628.90 1754.20 1879.50 2004.80 2130.10 2255.40
1 Cum
CEMENT MORTAR PER CUM CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand ( 1.05 cum ) 564.67 564.67 564.67 564.67 564.67 564.67
20 mm GRADED METAL
Arregates 20mm nominal size 0.60 1704.05 1022.43
12 mm GRADED METAL
Arregates 13.20 / 12.50mm nominal size
0.60 1460.30 876.18
Arregates 10mm nominal size 0.20 1260.30 252.06
Arregates 6mm nominal size 0.20 1054.05 210.81
Sl. Amount
Description Quantity Rate (Rs.) Per Unit
No. (Rs.)
1 Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank
with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for finished item of work
including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308) (BLD-CSTN-2-1)
2 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing on bank
for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and Overheads & Contractors profit complete for finished item
of work including seigniorage excluding de watering charges etc., as per SS 20 B(APSS 308) (BLKD-CSTN-2-6)
3 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc.,
and Overheads & Contractors profit complete for fnished item of work (APSS NO.309&310) (BLD-CSTN-2-9)
Unit : 1 cum
Taking output = 6 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 215.00 1 No. 66.65
Add for MA @ 40% 0.40 66.65 26.66
93.31
b&c)
Overheads & Contractors Profit @14% 0.14 93.31 13.06
Rate per 6 cum (a+b+c) 106.37
Rate per 1 cum (a+b+c) / 6 17.73
Rate per 1cum Say 18.00
3 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of
foundations
Unit : 1 cum and basement with initial lead in layers not exceeding 15cm thick, watering and ramming
Taking output = 6 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 215.00 1 No. 67
Add for MA @ 40% 0.40 66.65 27
93
b&c)
Overheads & Contractors Profit 0.14 93.31
@14% 13
Rate per 6 cum (a+b+c) 106
Rate per 1 cum (a+b+c) / 6 18
Rate per 1cum Say 18
4 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed Trap from approved quarry
including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including
seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level
curing etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 402) (BLD-CSTN-3-
5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 5.50 1 Kgs 891.00
Coarse aggregate 40mm 0.90 Cum 1166.55 1 Cum 1049.90
Fine aggregate ( Sand ) 0.45 Cum 199.22 1 Cum 89.65
Water (including curing) 1.20 kl 77.00 1 kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
2881.11
Overheads & Contractors Profit @14% 0.14 2881.11 403.36
Rate per 1cum 3284.47
Say 3284.00
5 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including
seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level
curing etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No. 402) (BLD-CSTN-3-
7)
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 5.50 1 Kgs 712.80
Coarse aggregate 40mm 0.90 Cum 1166.55 1 Cum 1049.90
Fine aggregate ( Sand ) 0.45 Cum 199.22 1 Cum 89.65
Water (including curing) 1.20 kl 77.00 1 kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
2702.91
Overheads & Contractors Profit @14% 0.14 2702.91 378.41
Rate per 1cum 3081.32
Say 3081.00
6 Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard granite stones carted from
approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from
approved quarry, to site and including seigniorage charges, sales & other taxes on all materials including labour
for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and Overheads
& Contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5.50 1 Kgs 326.70
CR stone (30x x30 x 60cm) 0.44 Cum 453.61 1 Cum 199.59
Rough stone ( 20 x 20 x 75cm) 0.50 Cum 492.50 1 Cum 246.25
Through stones (25 x 25 x 45 to 60cm) 0.16 Cum 948.69 1 Cum 151.79
Fine aggregate(sand) 0.33 Cum 199.22 1 Cum 65.74
B) LABOUR
1st class mason 1.20 Nos. 285.00 1 Each 342.00
Mazdoor (unskilled) 2.00 Nos. 215.00 1 Each 430.00
Add for MA @ 40% 0.40 772.00 308.80
2070.87
Overheads & Contractors Profit @14% 0.14 2070.87 289.92
Rate per 1cum 2360.79
Say 2361.00
7 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering
using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete,
curing etc.,and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402) (BLD-CSTN-3-14)
B.LABOUR :
1st class Mason 0.133 Nos 285.00 1 Each 37.91
2nd class Mason 0.267 Nos 260.00 1 Each 69.42
Mazdoor (both men&women) 4.60 Nos 215.00 1 Each 989.00
Add for MA @ 40% 0.40 1096.33 438.53
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 364.80 1 hour 486.28
Needle vibrator 40mm ( petrol ) 1.333 hours 120.40 1 hour 160.49
Add MA @ 25% on crew charges 0.40 370.44 148.18
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 5630.65
a Footings
Rate for Design mix M 25 1.00 Cum 5630.65 1 Cum 5630.65
Hire charges of centering and
scaffolding 1.00 Cum 59.00 1 Cum 59.00
Labour charges 1.00 Cum 330.00 1 Cum 330.00
Add for MA @ 40% 0.40 330.00 132.00
6151.65
Overheads & Contractors Profit @14% 0.14 6151.65 861.23
7012.88
Rate per 1cum Say 7013.00
b Column pedestals
Rate for Design mix M 25 1.00 Cum 5630.65 1 Cum 5630.65
Hire charges of centering and
scaffolding 1.00 Cum 70.00 1 Cum 70.00
Labour charges 1.00 Cum 524.00 1 Cum 524.00
Add for MA @ 40% 0.40 524.00 209.60
6434.25
Overheads & Contractors Profit @14% 0.14 6434.25 900.79
7335.04
Rate per 1cum Say 7335.00
8 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , Steel
scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc. including all
operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing
etc.,and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402 (BLD-CSTN-3-15)
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 364.80 1 hour 486.28
Needle vibrator 40mm ( petrol ) 1.333 hours 120.40 1 hour 160.49
Add MA @ 25% on crew charges 0.40 370.44 148.18
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 5958.82
a) COLUMNS :
i) un supported height up to 3.66 m
Rate for other Floors FF SF TF 4F 5F 6F
Rate as above 5958.82 5958.82 5958.82 5958.82 5958.82 5958.82
Hire charges of centering and
scaffolding 127.00 127.00 127.00 127.00 127.00 127.00
Labour charges 948.00 1042.80 1137.60 1232.40 1327.20 1422.00
Add for MA @ 40% 379.20 417.12 455.04 492.96 530.88 568.80
(Manual)Lift charges of materials 0.00 129.50 259.00 388.50 518.01 647.51
Add for MA @ 40% 0.00 51.80 103.60 155.40 207.20 259.00
Rate per 1cum 7413.02 7727.04 8041.06 8355.08 8669.10 8983.12
Overheads & Contractors Profit @14% 1037.82 1081.79 1125.75 1169.71 1213.67 1257.64
8450.84 8808.83 9166.81 9524.79 9882.77 10240.76
Say 8451.00 8809.00 9167.00 9525.00 9883.00 10241.00
b) LINTELS :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as above 5958.82 5958.82 5958.82 5958.82 5958.82 5958.82
Hire charges of centering and
scaffolding 843.00 843.00 843.00 843.00 843.00 843.00
Labour charges 675.00 742.50 810.00 877.50 945.00 1012.50
Add for MA @ 40% 270.00 297.00 324.00 351.00 378.00 405.00
(Manual)Lift charges of materials 0.00 129.50 259.00 388.50 518.01 647.51
Add for MA @ 40% 0.00 51.80 103.60 155.40 207.20 259.00
Rate per 1cum 7746.82 8022.62 8298.42 8574.22 8850.02 9125.82
Overheads & Contractors Profit @14% 1084.55 1123.17 1161.78 1200.39 1239.00 1277.62
8831.37 9145.79 9460.20 9774.61 10089.02 10403.44
Say 8831.00 9146.00 9460.00 9775.00 10089.00 10403.00
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 364.80 1 hour 112.36
Needle vibrator 40mm ( petrol ) 0.308 hours 120.40 1 hour 37.08
Add MA @ 25% on crew charges 0.40 85.59 34.24
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 4725.84
A) BEAMS :
i) un supported height up to 3.66 m
Rate for other Floors FF SF TF 4F 5F 6F
Rate as above 4725.84 4725.84 4725.84 4725.84 4725.84 4725.84
Hire charges of centering and
scaffolding 1276.00 1276.00 1276.00 1276.00 1276.00 1276.00
Labour , lift charges for scaffolding 795.00 874.50 954.00 1033.50 1113.00 1192.50
Add for MA @ 40% 318.00 349.80 381.60 413.40 445.20 477.00
Lift charges of materials(Winch 35HP-
Electric) 0.00 139.32 153.25 167.18 181.12 195.05
Add MA @ 25% on crew charges 0.00 16.49 18.14 19.79 21.44 23.09
Rate per Cum 7114.84 7381.95 7508.83 7635.71 7762.60 7889.48
Overheads & Contractors Profit @14% 996.08 1033.47 1051.24 1069.00 1086.76 1104.53
8110.92 8415.42 8560.07 8704.71 8849.36 8994.01
Say 8111.00 8415.00 8560.00 8705.00 8849.00 8994.00
B) RCC SLABS :
Roof Slabs 115mm thick :
un supported height up to 3.66 m
Rate for Design mix M 25
0.115 Cum 4725.84 1 Cum 543.47
9 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement
content of 380kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete
using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate)
( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering
using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc.,
including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete,
curing etc.,complete but excluding cost of steel and its fabrication charges for 60cm wide sun-shades 7.5cm
thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges
for mixing, laying, curing etc.,
and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for finished
item of work (APSS No. 402, 403 & 903)(BLD-CSTN-3-16)
A.MATERIALS :
Cement 380.00 Kgs 5.50 1 Kg 2090.00
20mm HBG graded metal 0.80 Cum 1535.94 1 Cum 1228.75
Sand 0.40 Cum 199.22 1 Cum 79.69
Chemical admixtures 1.00 Cum 50.00 1 Cum 50.00
B.LABOUR :
1st class Mason 0.067 Nos 285.00 1 Each 19.10
2nd class Mason 0.133 Nos 260.00 1 Each 34.58
Mazdoor (both men&women) 3.077 Nos 215.00 1 Each 661.56
Add for MA @ 40% 0.40 715.23 286.09
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 364.80 1 hour 112.36
Add MA @ 25% on crew charges 0.40 57.07 22.83
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 4677.35
Unit : 1cum
A.MATERIALS :
Cement 36 Kgs 5.50 1 Kgs 198.00
Bricks 2nd class 23x11x7cms 512 Nos 3381.13 1000 Nos 1731.14
Fine aggregate ( Sand ) 0.20 cu.m. 199.22 1 cu.m. 39.84
water charges @ 1% 0.01 1968.98 19.69
B.LABOUR :
1st class mason 0.24 Nos. 285.00 1 Each 68.40
2nd class mason 0.56 Nos. 260.00 1 Each 145.60
Mazdoor (Unskilled) 1.89 Nos. 215.00 1 Each 406.35
Add for MA @ 40% 0.40 620.35 248.14
Rate for 1 cu.m. 2857.16
a) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 2857.16 2857.16 2857.16 2857.16 2857.16 2857.16
Hire charges for Access Scaffolding 23.00 23.00 23.00 23.00 23.00 23.00
Labour charges for scaffolding 156.48 234.74 313.00 391.26 469.48 547.74
Add for MA @ 40% 62.59 93.90 125.20 156.50 187.79 219.10
Lift charges ( Page 131 of Std. Data ) 0.00 62.04 124.07 186.11 248.14 310.18
Add for MA @ 40% 0.00 24.82 49.63 74.44 99.26 124.07
Rate for 1 cu.m. 3099.23 3295.65 3492.06 3688.48 3884.83 4081.25
Overheads & Contractors Profit @14% 433.89 461.39 488.89 516.39 543.88 571.38
3533.12 3757.04 3980.95 4204.87 4428.71 4652.63
Say 3533.00 3757.00 3981.00 4205.00 4429.00 4653.00
b) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 2857.16 2857.16 2857.16 2857.16 2857.16 2857.16
Hire charges for Access Scaffolding 23.00 46.00 69.00 92.00 115.00 138.00
Labour charges for scaffolding 156.48 391.22 704.22 1095.48 1564.96 2112.70
Add for MA @ 40% 62.59 156.49 281.69 438.19 625.98 845.08
Lift charges ( Page 131 of Std. Data ) 0.00 62.04 124.07 186.11 248.14 310.18
Add for MA @ 40% 0.00 24.82 49.63 74.44 99.26 124.07
Rate for 1 cum. 3099.23 3537.73 4085.77 4743.39 5510.50 6387.19
Overheads & Contractors Profit @14% 433.89 495.28 572.01 664.07 771.47 894.21
3533.12 4033.01 4657.78 5407.46 6281.97 7281.40
Say 3533.00 4033.00 4658.00 5407.00 6282.00 7281.00
11 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using second
class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm
and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into
mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel,
sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational,
incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, etc.,and Overheads & Contractors profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509) (BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Bricks 2nd class 23x11x7cms 512 Nos. 3381.13 1000 Nos. 1731.14
Cement Mortar (1:4) 0.20 cu.m. 2604.87 1 cu.m. 520.97
water charges @ 1% 0.01 2252.11 22.52
B.LABOUR :
1st class mason 0.60 Nos. 285.00 1 Each 171.00
2nd class mason 0.60 Nos. 260.00 1 Each 156.00
Mazdoor (Unskilled) 2.75 Nos. 215.00 1 Each 591.25
Add for MA @ 40% 0.40 918.25 367.30
Rate for 1 cum 3560.18
Rate for 1 sqm 391.62
Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 391.62 391.62 391.62 391.62 391.62 391.62
Hire charges for Access Scaffolding 5.29 5.29 5.29 5.29 5.29 5.29
Labour charges for scaffolding 35.99 53.99 71.99 89.99 107.98 125.98
Add for MA @ 40% 14.40 21.60 28.80 36.00 43.19 50.39
Lift charges ( Page 131 of Std. Data ) 0.00 91.83 183.65 275.48 367.30 459.13
Add for MA @ 40% 0.00 36.73 73.46 110.19 146.92 183.65
Rate for 1 sqm 447.30 601.06 754.81 908.57 1062.30 1216.06
Overheads & Contractors Profit @14% 62.62 84.15 105.67 127.20 148.72 170.25
Rate per 1 sqm 509.92 685.21 860.48 1035.77 1211.02 1386.31
Say 510.00 685.00 860.00 1036.00 1211.00 1386.00
12 Masonry work in CM(1:6) prop with flyash Cement solid blocks of size 290mm x 225mm x 140mm for
manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , .Gypsum of 5kgs and stone dust
including cost and conveyance of all materials,labour charges,seigniorage charges,scaffolding and curing etc.,and
Overheads & Contractors profit complete with a compressive strength not less than 50 kg/sq.cm for walls
foundation and basement and compound wall (APSS No. 501 & 504).(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for
1 Cum of Masonry 110 Nos 14450.07 1000 Nos 1589.51
Cost of Cement Mortar(1:6) 0.10 cu.m. 1944.87 1 cu.m. 194.49
water charges @ 1% 0.01 1783.99 17.84
B .LABOUR
Mason 1st class 0.42 Nos. 285.00 1 Each 119.70
Mason 2nd class 0.92 Nos. 260.00 1 Each 239.20
Man Mazdoor 0.70 Nos. 215.00 1 Each 150.50
Women Mazdoor 2.10 Nos. 215.00 1 Each 451.50
Add for MA @ 40% 0.40 960.90 384.36
Rate for 1 cum. 3147.09
b) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 3147.09 3147.09 3147.09 3147.09 3147.09 3147.09
Hire charges for Access Scaffolding 23.51 23.51 23.51 23.51 23.51 23.51
Labour charges for scaffolding 159.96 239.96 319.96 399.96 479.91 559.91
Add for MA @ 40% 63.98 95.98 127.98 159.98 191.96 223.96
Lift charges ( Page 131 of Std. Data ) 0.00 96.09 192.18 288.27 384.36 480.45
Add for MA @ 40% 0.00 38.44 76.87 115.31 153.74 192.18
3394.55 3641.08 3887.60 4134.13 4380.58 4627.11
Overheads & Contractors Profit @14% 475.24 509.75 544.26 578.78 613.28 647.80
Rate for 1 cum. 3869.79 4150.83 4431.86 4712.91 4993.86 5274.91
Say 3870.00 4151.00 4432.00 4713.00 4994.00 5275.00
c) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 3147.09 3147.09 3147.09 3147.09 3147.09 3147.09
Hire charges for Access Scaffolding 23.51 47.02 70.53 94.04 117.56 141.07
Labour charges for scaffolding 159.96 399.91 719.87 1119.82 1599.73 2159.64
Add for MA @ 40% 63.98 159.96 287.95 447.93 639.89 863.86
Lift charges ( Page 131 of Std. Data ) 0.00 96.09 192.18 288.27 384.36 480.45
Add for MA @ 40% 0.00 38.44 76.87 115.31 153.74 192.18
3394.55 3888.52 4494.50 5212.47 6042.38 6984.29
Overheads & Contractors Profit @14% 475.24 544.39 629.23 729.75 845.93 977.80
Rate for 1 cum. 3869.79 4432.91 5123.73 5942.22 6888.31 7962.09
Say 3870.00 4433.00 5124.00 5942.00 6888.00 7962.00
13 Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using Flyash lime
solid blocks of size 225mm x 100mm x 60mm having minimum compressive strength of 50 Kg/Sq.cm and using
two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including
cost and seigniorage charges and conveyance of all matyerials and water from approved sources to work site and
all operational and incidental , labour charges such as scaffolding , mixing mortar , constructing masonry , lift
charges , curing etc.and Overheads & Contractors profit complete but excluding cost of steel and its fabrication
charges complete for finished item of work as per SS.509 (BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks 741 Nos. 3214.30 1000 Nos. 2381.80
Cement Mortar (1:4) 0.10 cu.m. 2604.87 1 cu.m. 260.49
water charges @ 1% 0.01 2642.28 26.42
B.LABOUR :
1st class mason 0.60 Nos. 285.00 1 Each 171.00
2nd class mason 0.60 Nos. 260.00 1 Each 156.00
Mazdoor (Unskilled) 2.75 Nos. 215.00 1 Each 591.25
Add for MA @ 40% 0.40 918.25 367.30
Rate for 1 cum 3954.26
Rate for 10 sqm 395.43
Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 395.43 395.43 395.43 395.43 395.43 395.43
Hire charges for Access Scaffolding 5.29 5.29 5.29 5.29 5.29 5.29
Labour charges for scaffolding 35.99 53.99 71.99 89.99 107.98 125.98
Add for MA @ 40% 14.40 21.60 28.80 36.00 43.19 50.39
Lift charges ( Page 131 of Std. Data ) 0.00 91.83 183.65 275.48 367.30 459.13
Add for MA @ 40% 0.00 36.73 73.46 110.19 146.92 183.65
Rate per 1 sqm 451.11 604.87 758.62 912.38 1066.11 1219.87
Overheads & Contractors Profit @14% 63.15 84.68 106.21 127.73 149.26 170.78
Rate per 1 sqm 514.26 689.55 864.83 1040.11 1215.37 1390.65
say 514.00 690.00 865.00 1040.00 1215.00 1391.00
14 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal
(coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and
10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine
aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all
materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and
Overheads & Contractors profit for Bed Blocks & Hold Fasts for finished item of work. (APSS No. 402) (BLD-
CSTN-3-10 & 11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1535.94 1 Cum 1382.35
Sand 0.45 Cum 199.22 1 Cum 89.65
Cement 220.00 Kgs 5.50 1 Kgs 1210.00
Water ( including for curing ) 1.20 Kl 77.00 1 Kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (Unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
Rate for 1 Cum 3532.57
15 Plain Cement Concrete M 25 Design Mix ( by weigh batching ) using 20mm size (SS5) hard granite machine
crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of
13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 380 kgs. of
cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand),
coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering,
shuttering, machine mixing, laying concrete, lift charges, curing etc., complete for finished item of work (APSS No.
402 & 403) for steps (BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1535.94 1 Cum 1382.35
Sand 0.45 Cum 199.22 1 Cum 89.65
Cement 380.00 Kgs 5.50 1 Kgs 2090.00
Water ( including for curing ) 1.20 Kl 77.00 1 Kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (Unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
Rate for 1 Cum 4412.57
16 Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 12mm size (SS5) hard granite
machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm ,
20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1
cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering,
machine mixing, laying concrete, vibrating,lift charges, curing etc., and Overheads & Contractors profit complete
for finished item of work (APSS No. 402 & 403) for sill slabs , platforms , shelves. (BLD-CSTN-3-13)
A.MATERIALS :
Cement 330.00 Kgs 5.50 1 Kg 1815.00
12mm HBG graded metal 0.90 Cum 1339.05 1 Cum 1205.15
Sand 0.45 Cum 199.22 1 Cum 89.65
B.LABOUR :
1st class Mason 0.133 Nos 285.00 1 Each 37.91
2nd class Mason 0.267 Nos 260.00 1 Each 69.42
Mazdoor (both men&women) 3.60 Nos 215.00 1 Each 774.00
Add for MA @ 40% 0.40 881.33 352.53
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Needle vibrator 40mm ( petrol ) 1.00 hours 120.40 1 hour 120.40
Add MA @ 25% on crew charges 0.40 221.30 88.52
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 4893.37
a) Sill slabs :
Cost of RCC(1:2:4) 1.00 cum 4893.37 1 cum 4893.37
Rate per 1cum 4893.37
17 Supplying, fitting and placing Fe-500 bar reinforcement in VRCC works complete as per drawings and
technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded
including cost and conveyance of steel, binding wire etc., lifting charges of steel , placing in position, tying with
binding wire, all tools etc., and Overheads & Contractors profit complete for finished item of work ( APSS No.126 )
(BLD-CSTN-4.2)
Unit - 1 MT
a) Material
HYSD bars including 5% for overlaps
and wastage 1.05 MT 41000.00 1 MT 43050.00
Binding wire 6.00 Kgs 55.00 1 Kgs 330.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position
Blacksmith / Barbender 2.00 Nos. 300.00 1 Each 600.00
Mazdoor(Unskilled) 6.40 Nos. 215.00 1 Each 1376.00
Add for MA @ 40% 0.40 1976.00 790.40
46146.40
18 Supplying , fitting and placing Mild steel bar reinforcement complete as per drawings and technical
specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost
and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all
tools etc., and Overheads & Contractors profit complete for finished item of work(apss nO.126)(BLD-CSTN-4-1&
BLD-CSTN-4.2)
Unit - 1 MT
a) Material
Mild steel bars including 5% for overlaps
and wastage 1.05 MT 39000.00 1 MT 40950.00
Binding wire 6.00 Kgs 55.00 1 Kgs 330.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position
Blacksmith / Barbender 2.00 Nos. 300.00 1 Each 600.00
Mazdoor(Unskilled) 6.40 Nos. 215.00 1 Each 1376.00
Add for MA @ 40% 0.40 1976.00 790.40
44046.40
19 Ornamental plastering to ceiling 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top
coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and
Overheads & Contractors profit complete for finished item of work. (SS 901,903 & 904) (BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5.50 1 Kgs 145.20
Fine aggregate (Sand) 0.11 Cum 199.22 1 Cum 21.91
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5.50 1 Kgs 79.20
Fine aggregate (Sand) 0.04 Cum 199.22 1 Cum 7.97
B.LABOUR :
1st Class Mason 0.63 Nos. 285.00 1 Each 179.55
2nd Class Mason 1.47 Nos. 260.00 1 Each 382.20
Mazdoor (Unskilled) 3.90 Nos. 215.00 1 Each 838.50
Add for MA @ 40% 0.40 1400.25 560.10
Rate per 10 Sqm 2214.63
Rate per 1 Sqm 221.46
20 Ornamental ceiling plastering 12mm thick single coat in CM(1:5) including cost and conveyance of all
materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials,
and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for finished
item of work.(SS 901,903 & 904) (BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar(1:5) 0.15 Cum 2208.87 1 Cum 331.33
B.LABOUR :
1st Class Mason 0.60 Nos. 285.00 1 Each 171.00
Mazdoor (Unskilled) 0.96 Nos. 215.00 1 Each 206.40
Add for MA @ 40% 0.40 377.40 150.96
Rate per 10 Sqm 859.69
Rate per 1 Sqm 85.97
21 Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM
(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to
site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete
for finished item of work. (SS 901,903 & 904) ( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5.00 1 Kgs 132.00
Fine aggregate (Sand) 0.11 Cum 199.22 1 Cum 21.91
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5.00 1 Kgs 72.00
Fine aggregate (Sand) 0.04 Cum 199.22 1 Cum 7.97
B.LABOUR :
1st Class Mason 0.63 Nos. 285.00 1 Each 179.55
2nd Class Mason 1.47 Nos. 260.00 1 Each 382.20
Mazdoor (Unskilled) 3.90 Nos. 215.00 1 Each 838.50
Add for MA @ 40% 0.40 1400.25 560.10
Rate per 10 Sqm 2194.23
Rate per 1 Sqm 219.42
a) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 219.42 219.42 219.42 219.42 219.42 219.42
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
224.99 247.11 269.24 291.36 313.48 335.60
Overheads & Contractors Profit @14% 31.50 34.60 37.69 40.79 43.89 46.98
Rate per 1 Sqm 256.49 281.71 306.93 332.15 357.37 382.58
Say 256.00 282.00 307.00 332.00 357.00 383.00
b) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 219.42 219.42 219.42 219.42 219.42 219.42
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
224.99 252.15 281.84 314.04 348.76 386.00
Overheads & Contractors Profit @14% 31.50 35.30 39.46 43.97 48.83 54.04
Rate per 1 Sqm 256.49 287.45 321.30 358.01 397.59 440.04
Say 256.00 287.00 321.00 358.00 398.00 440.00
22 Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in
CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc.,
to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges
on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for
finished item of work .(SS 901,903 & 904) (BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.00 Kgs 5.00 1 Kgs 215.00
Fine aggregate (Sand) 0.18 Cum 199.22 1 Cum 35.86
Top coat in CM(1:4) , 4mm thick
Cement 14.50 Kgs 5.00 1 Kgs 72.50
Fine aggregate (Sand) 0.04 Cum 199.22 1 Cum 7.97
B.LABOUR :
1st Class Mason 0.63 Nos. 285.00 1 Each 179.55
2nd Class Mason 1.47 Nos. 260.00 1 Each 382.20
Mazdoor (Unskilled) 3.90 Nos. 215.00 1 Each 838.50
Add for MA @ 40% 0.40 1400.25 560.10
Rate per 10 Sqm 2291.68
Rate per 1 Sqm 229.17
a) Internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 229.17 229.17 229.17 229.17 229.17 229.17
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
234.74 256.86 278.99 301.11 323.23 345.35
Overheads & Contractors Profit @14% 32.86 35.96 39.06 42.16 45.25 48.35
Rate per 1 Sqm 267.60 292.82 318.05 343.27 368.48 393.70
Say 268.00 293.00 318.00 343.00 368.00 394.00
b) External walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 229.17 229.17 229.17 229.17 229.17 229.17
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 14.00 28.01 42.01 56.01 70.01
Add for MA @ 40% 0.00 5.60 11.20 16.80 22.40 28.00
234.74 261.90 291.59 323.79 358.51 395.75
Overheads & Contractors Profit @14% 32.86 36.67 40.82 45.33 50.19 55.41
Rate per 1 Sqm 267.60 298.57 332.41 369.12 408.70 451.16
Say 268.00 299.00 332.00 369.00 409.00 451.00
23 Plastering 20mm thick single coat in CM(1:5) including cost and conveyance of all materials like cement, sand,
water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational,
incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for finished item of work .(SS
901,903 & 904) (BLD-CSTN-8-8)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar (1:5) 0.21 Cum 2208.87 1 Cum 463.86
B.LABOUR :
2nd Class Mason 0.94 Nos. 260.00 1 Each 244.40
Mazdoor (Unskilled) 1.60 Nos. 215.00 1 Each 344.00
Add for MA @ 40% 0.40 588.40 235.36
Rate per 10 Sqm 1287.62
Rate per 1 Sqm 128.76
a) for basement :
Rate per 1 Sqm 10.00 sqm 128.76 10 sqm 128.76
Overheads & Contractors Profit @14% 0.14 128.76 18.03
Rate per 1 Sqm 146.79
Say 147.00
b) internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 128.76 128.76 128.76 128.76 128.76 128.76
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 5.88 11.77 17.65 23.54 29.42
Add for MA @ 40% 0.00 2.35 4.71 7.06 9.42 11.77
134.33 145.08 155.85 166.60 177.37 188.12
Overheads & Contractors Profit @14% 18.81 20.31 21.82 23.32 24.83 26.34
Rate per 1 Sqm 153.14 165.39 177.67 189.92 202.20 214.46
Say 153.00 165.00 178.00 190.00 202.00 214.00
c) external walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 128.76 128.76 128.76 128.76 128.76 128.76
Hire charges for Access Scaffolding 0.53 1.06 1.59 2.12 2.65 3.18
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 5.88 11.77 17.65 23.54 29.42
Add for MA @ 40% 0.00 2.35 4.71 7.06 9.42 11.77
134.33 150.65 169.51 190.87 214.77 241.17
Overheads & Contractors Profit @14% 18.81 21.09 23.73 26.72 30.07 33.76
Rate per 1 Sqm 153.14 171.74 193.24 217.59 244.84 274.93
Say 153.00 172.00 193.00 218.00 245.00 275.00
24 Plastering 12mm thick single coat in CM(1:5) including cost and conveyance of all materials like cement, sand,
water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational,
incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and Overheads & Contractors profit complete for finished item of work.(SS
901,903 & 904) (BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar (1:5) 0.15 Cum 2208.87 1 Cum 331.33
B.LABOUR :
1st Class Mason 0.60 Nos. 285.00 1 Each 171.00
Mazdoor (Unskilled) 0.96 Nos. 215.00 1 Each 206.40
Add for MA @ 40% 0.40 377.40 150.96
Rate per 10 Sqm 859.69
Rate per 1 Sqm 85.97
a) for basement :
Rate per 1 Sqm 10.00 sqm 85.97 10 sqm 85.97
Overheads & Contractors Profit @14% 0.14 85.97 12.04
Rate per 1 Sqm 98.01
Say 98.00
b) internal walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 85.97 85.97 85.97 85.97 85.97 85.97
Hire charges for Access Scaffolding 0.53 0.53 0.53 0.53 0.53 0.53
Labour charges for scaffolding 3.60 5.40 7.20 9.00 10.80 12.60
Add for MA @ 40% 1.44 2.16 2.88 3.60 4.32 5.04
Lift charges ( Page 131 of Std. Data ) 0.00 3.77 7.55 11.32 15.10 18.87
Add for MA @ 40% 0.00 1.51 3.02 4.53 6.04 7.55
91.54 99.34 107.15 114.95 122.76 130.56
Overheads & Contractors Profit @14% 12.82 13.91 15.00 16.09 17.19 18.28
Rate per 1 Sqm 104.36 113.25 122.15 131.04 139.95 148.84
Say 104.00 113.00 122.00 131.00 140.00 149.00
c) external walls :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 85.97 85.97 85.97 85.97 85.97 85.97
Hire charges for Access Scaffolding 0.53 1.06 1.59 2.12 2.65 3.18
Labour charges for scaffolding 3.60 9.00 16.20 25.20 36.00 48.60
Add for MA @ 40% 1.44 3.60 6.48 10.08 14.40 19.44
Lift charges ( Page 131 of Std. Data ) 0.00 3.77 7.55 11.32 15.10 18.87
Add for MA @ 40% 0.00 1.51 3.02 4.53 6.04 7.55
91.54 104.91 120.81 139.22 160.16 183.61
Overheads & Contractors Profit @14% 12.82 14.69 16.91 19.49 22.42 25.71
Rate per 1 Sqm 104.36 119.60 137.72 158.71 182.58 209.32
Say 104.00 120.00 138.00 159.00 183.00 209.00
25 Providing impervious coat to exposed RCC roof slab surface with CM(1:3) 20mm thick with 1kg of water
proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage
charges, including conveyannce of materials and including all operational, incidental and labour charges for mixing
mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc.,and
Overheads & Contractors profit complete for finished item of work. (APSS No. 901 & 903).(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement Mortar (1:3) 0.21 Cum 3264.87 1 Cum 685.62
Impervious Water proof compound 2.00 Kgs 24.00 1 Kgs 48.00
B.LABOUR :
1st Class Mason 0.66 Nos. 285.00 1 Each 188.10
2nd Class Mason 1.54 Nos. 260.00 1 Each 400.40
Mazdoor (Unskilled) 3.70 Nos. 215.00 1 Each 795.50
Add for MA @ 40% 0.40 1384.00 553.60
Rate per 10 Sqm 2671.22
26 Plain Cement Concrete M 20 nominal mix using 12mm size graded machine crushed hard granite metal(coarse
aggregate) (consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all
charges for mixing, laying concrete in position, curing, lift charges and Overheads & Contractors profit etc., over
RCC roof slab 100mm thick at centre and 40mm thick at ends with an average thickness of 70mm for
finished item of work. (APSS No. 402) (BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 12mm SS5 size metal 0.90 Cum 1339.05 1 Cum 1205.15
Sand 0.45 Cum 199.22 1 Cum 89.65
Cement 330.00 Kgs 5.50 1 Kgs 1815.00
Water ( including for curing ) 1.20 Kl 77.00 1 Kl 92.40
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 51.48
C.LABOUR :
1st class mason 0.10 Nos. 285.00 1 Each 28.50
Mazdoor (Unskilled) 1.39 Nos. 215.00 1 Each 298.85
Add for MA @ 40% 0.40 327.35 130.94
Rate for 1 Cum 3960.36
27 Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in
side of septic tank ,in sunken slabs etc. to required slopes with CM (1:3) prop.12mm thick mixed with water
proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one
bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread
lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like
cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on
all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering
smooth and thread lining, curing including rounding off junctions of wall and slab etc., and Overheads &
Contractors profit complete for finished item of work. (APSS No. 901 & 903).(BLD-CSTN-8-2)
A.MATERIALS :
Cement Mortar (1:3) 0.15 Cum 3264.87 1 Cum 489.73
Impervious Water proof compound 1.44 Kgs 24.00 1 Kgs 34.56
B.LABOUR :
1st Class Mason 0.60 Nos. 285.00 1 Each 171.00
Mazdoor (Unskilled) 0.96 Nos. 215.00 1 Each 206.40
Add for MA @ 40% 0.40 377.40 150.96
Rate per 10 Sqm 1052.65
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 1052.65 1052.65 1052.65 1052.65 1052.65 1052.65
Lift charges ( Page 131 of Std. Data ) 0.00 37.74 75.48 113.22 150.96 188.70
Add for MA @ 40% 0.00 15.10 30.19 45.29 60.38 75.48
1052.65 1105.49 1158.32 1211.16 1263.99 1316.83
Overheads & Contractors Profit @14% 147.37 154.77 162.17 169.56 176.96 184.36
Rate per 10 Sqm 1200.02 1260.26 1320.49 1380.72 1440.95 1501.19
Rate per 1 Sqm 120.00 126.03 132.05 138.07 144.10 150.12
Say 120.00 126.00 132.00 138.00 144.00 150.00
28 RCM facia 50mm thick for drop walls,fins with rabbit wire mesh&nomianl reinforcement a directred by Engineer -
In - Charge with dubara sponge finishing,including cost and conveyance of all materials to site,seigniorage
charges,sales&othertaxes on all materials,operationals &incidental,cost and conveyance of cement,wire
mesh,water to work site,centering,scaffolding and form work,lift charges etc.,and Overheads & Contractors profit
complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of
work(APSS NO.403&903) ( BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 12.00 1 sqm 159.60
Cement 319.10 Kgs 5.50 1 Kgs 1755.05
Fine aggregate (Sand) 0.577 cu.m. 199.22 1 Kgs 114.95
Excluding HYSD steel/mild steel &
binding wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 285.00 1 Each 2280.00
Operator concrete mixer 1.00 Nos. 285.00 1 Each 285.00
Mazdoor (Unskilled) 10.00 Nos. 215.00 1 Each 2150.00
Add for MA @ 40% 0.40 4715.00 1886.00
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 2.00 hours 248.40 1 hours 496.80
cum)capacity
Add MA @ 25% on crew charges 0.40 128.70 102.96
Rate per 10 Sqm 9230.36
Rate per 10 Sqm 923.04
29 Plain Cement Concrete M 20 nominal mix using 12mm size graded machine crushed hard granite metal(coarse
aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all
charges for mixing, laying concrete in position, curing, lift charges and Overheads & Contractors profit etc., for
finished item of work over PCC / RCC roof slab . (APSS No. 402) (BLD-CSTN-3-11)
30 Flooring / treads of 0.30m wide with polished shahabad / Tandur stone slabs of 15mm to 18mm thick
0.457m x 0.457m or any other size as specified set over a base coat of CM (1:8) , 12mm thick over already laid
CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and
jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water,
flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all
labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges ,
cost of base coat etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No.703 &
701) (BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm
thick 11.00 Sqm 2044.16 10 Sqm 2248.58
Cement for CM (1:8) proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
Cement for jointing 20.00 Kgs 5.50 1 Kg 110.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Add water charges 1% 0.01 2682.78 26.83
B .LABOUR
Mason 1st class 3.10 Nos 285.00 1 Each 883.50
Mason 2nd class 1.10 Nos 260.00 1 Each 286.00
Mazdoor(un skilled) 0.86 Nos 215.00 1 Each 184.90
Add for MA @ 40% 0.40 1354.40 541.76
Rate for 10sqm 4605.77
a) Flooring :
Rate for other floors FF SF TF 4F 5F 6F
Rate as worked out above 4605.77 4605.77 4605.77 4605.77 4605.77 4605.77
Lift charges ( Page 131 of Std. Data ) 0.00 135.44 270.88 406.32 541.76 677.20
Add for MA @ 40% 0.00 54.18 108.35 162.53 216.70 270.88
4605.77 4795.39 4985.00 5174.62 5364.23 5553.85
Overheads & Contractors Profit @14% 644.81 671.35 697.90 724.45 750.99 777.54
Rate per 10 Sqm 5250.58 5466.74 5682.90 5899.07 6115.22 6331.39
Rate per 1 Sqm 525.06 546.67 568.29 589.91 611.52 633.14
Say 525.00 547.00 568.00 590.00 612.00 633.00
31 Flooring with ceramic tiles 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over
base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement
slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth
mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc.,and
Overheads & Contractors profit complete including seigniorage charges etc., complete for finished item of work.
(APSS No.701 & 707) (BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7.3mm thick of 1st quality
10.50 Sqm 374.00 1 Sqm 3927.00
Cement for CM(1:8) proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White Cement 2.00 Kgs 18.00 1 Kg 36.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Add water charges 1% 0.01 4287.21 42.87
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 6521.78
32 Flooring / treads with Edge cut Rectified ceramic tiles 8mm thick , 1st quality and with borders and design as
per the approved flooring pattern as directed by the Engineer-In -Charge, set over base coat of cement mortar
(1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment
of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete including
seigniorage charges etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No.701 &
707)(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7.3mm thick of 1st quality
10.50 Sqm 450.00 1 Sqm 4725.00
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White Cement 2.00 Kgs 18.00 1 Kg 36.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Add water charges 1% 0.01 5085.21 50.85
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 7327.76
33 Flooring / treads with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge
of size not less than 598 mm x 598 mm , 8mm thickness regular finish and normal colours with borders and
design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM
(1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like
consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with
pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white
cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of
base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the
Engineer- in-charge etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No.701 &
707) (BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8mm thick of size not less
than 598mm x 598mm 10.50 Sqm 723.00 1 Sqm 7591.50
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White Cement 6.00 Kgs 18.00 1 Kg 108.00
Sand for CM(1:8) 0.12 Cum 199.22 1 Cum 23.91
Sand for pointing 0.02 Cum 199.22 1 Cum 3.98
Add water charges 1% 0.01 8027.69 80.28
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 10299.67
34 Flooring / treads with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality and of size as
approved by Engineer-in-charge with borders and design as per the approved flooring pattern as directed by the
Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof
slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately
with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all
materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost
of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar,
laying tiles to required slope as directed by the Engineer- in-charge etc.,and Overheads & Contractors profit
complete for finished item of work. (APSS No.701 & 707) (BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror
polished of all shades) 10.50 Sqm 780.00 1 Sqm 8190.00
Cement for CM(1:8) for base coat 21.60 Kgs 5.50 1 Kg 118.80
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
Sand for CM(1:8) 0.20 Cum 199.22 1 Cum 39.84
Add water charges 1% 0.01 8530.14 85.30
B .LABOUR
Mason 1st class 0.96 Nos 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos 260.00 1 Each 582.40
Mazdoor(un skilled) 3.30 Nos 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10sqm 10807.15
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than
black 16 to 18mm thick 10.50 Sqm 2000.00 1 Sqm 21000.00
Cement for CM(1:8) for base coat 36.00 Kgs 5.50 1 Kg 198.00
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing 6.00 Kgs 18.00 1 Kg 108.00
Sand for CM(1:8) 0.20 Cum 199.22 1 Cum 39.84
Add water charges 1% 0.01 21527.34 215.27
B .LABOUR
Mason 1st class 3.00 Nos 285.00 1 Each 855.00
Mason 2nd class 1.00 Nos 260.00 1 Each 260.00
Mazdoor(un skilled) 8.00 Nos 215.00 1 Each 1720.00
Add for MA @ 40% 0.40 2835.00 1134.00
Rate for 10sqm 25711.62
a) Flooring :
Rate for other Floors FF SF TF 4F 5F 6F
Rate as worked out above 25711.62 25711.62 25711.62 25711.62 25711.62 25711.62
Lift charges ( Page 131 of Std. Data ) 0.00 283.50 567.00 850.50 1134.00 1417.50
Add for MA @ 40% 0.00 113.40 226.80 340.20 453.60 567.00
25711.62 26108.52 26505.42 26902.32 27299.22 27696.12
Overheads & Contractors Profit @14% 3599.63 3655.19 3710.76 3766.32 3821.89 3877.46
Rate per 10 Sqm 29311.25 29763.71 30216.18 30668.64 31121.11 31573.58
Rate per 1 Sqm 2931.12 2976.37 3021.62 3066.86 3112.11 3157.36
Say 2931.00 2976.00 3022.00 3067.00 3112.00 3157.00
36 Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick over
CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including
cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational,
incidental labour & lift charges, dresssing , polishing charges and seigniorage charges and all other taxes on all
materials, cost of base coat and Overheads & Contractors profit complete for finished item of work for platforms
(S.S.701 & special) (BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to
18mm thick 10.50 Sqm 1700.00 1 Sqm 17850.00
Cement for CM(1:8) for base coat 36.00 Kgs 5.50 1 Kg 198.00
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing 6.00 Kgs 18.00 1 Kg 108.00
Sand for CM(1:8) 0.20 Cum 199.22 1 Cum 39.84
Add water charges 1% 0.01 18377.34 183.77
B .LABOUR
Mason 1st class 3.00 Nos 285.00 1 Each 855.00
Mason 2nd class 1.00 Nos 260.00 1 Each 260.00
Mazdoor(un skilled) 8.00 Nos 215.00 1 Each 1720.00
Add for MA @ 40% 0.40 2835.00 1134.00
Rate for 10sqm 22530.12
Unit : 10sqm
A.MATERIALS :
6mm to 12 mm H.G. Metal (Machine
crushed) 0.17 Cum 1339.05 1 Cum 227.64
Cement 120.00 Kgs 5.50 1 Kgs 660.00
Sand 0.085 Cum 199.22 1 Cum 16.93
Add water charges 1% 0.01 904.57 9.05
B. LABOUR
Mason 1st class 1.25 Nos. 285.00 1 Each 356.25
Mason 2nd class 0.06 Nos. 260.00 1 Each 15.60
Mazdoor (unskiled) 3.00 Nos. 215.00 1 Each 645.00
Add for MA @ 40% 0.40 1016.85 406.74
Rate per 10 Sqm 2337.21
38 Flooring with chequered terrazo tiles of 30mm thick (dark shade) of size 0.305m x 0.305m set over base
coat of cement mortar (1:6), 12 mm thick over CC bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with
pigment of matching shade including cost and conveyance of all materials like cement , sand , water and tiles
etc.,and Overheads & Contractors profit complete including seigniorage charges complete for finished item of
work. (BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred terrazo tiles 30mm thick 10.50 sqm 222.00 1 sqm 2331.00
Cement for CM(1:6) proportion for base
coat 28.80 Kgs 5.50 1 Kgs 158.40
Cement for slurry 33.00 Kgs 5.50 1 Kgs 181.50
Cement for jointing 6.00 Kgs 5.50 1 Kgs 33.00
Sand for CM(1:6) proportion 0.12 Cum 199.22 1 Cum 23.91
B. LABOUR
Mason 2nd class 0.96 Nos. 260.00 1 Each 249.60
Man Mazdoor 2.24 Nos. 215.00 1 Each 481.60
Mazdoor (unskiled) 3.30 Nos. 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1440.70 576.28
Add water charges 1% 0.01 4744.79 47.45
Rate per 10 Sqm 4792.23
39 Providing skirting to internal walls to 15 cm height / risers of steps with Edge cut Rectified ceramic tiles 8 mm
thick length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete
including seigniorage charges etc., and Overheads & Contractors profitcomplete for finished item of work.(APSS
No.701 &707) (BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of Edge cut Rectified ceramic tiles
8 mm thick 10.50 sqm 450.00 1 sqm 4725.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 6.00 Kgs 18.00 1 Kg 108.00
Add water charges 1% 0.01 5228.49 52.28
B.LABOUR
Mason 1st class 0.77 Nos. 285.00 1 Each 219.45
Mazdoor(unskilled) 0.80 Nos. 215.00 1 Each 172.00
Add for MA @ 40% 0.40 391.45 156.58
Rate per 10 Sqm 5828.80
40 Providing skirting to internal walls to 15 cm height / risers of steps with vitrified tiles 8mm to 10mm thick ,
normal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and
Overheads & Contractors profit complete including seigniorage charges etc., complete for finished item of work.
(APSS No.701 &707)(BLD-CSTN-9-20)
Unit = 10 sqm
A.MATERIALS :
Cost of vitrified tiles 8 to 10mm thick 10.50 sqm 723.00 1 sqm 7591.50
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 2.00 Kgs 18.00 1 Kg 36.00
Add water charges 1% 0.01 8022.99 80.23
B.LABOUR
Mason 1st class 0.96 Nos. 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos. 260.00 1 Each 582.40
Mazdoor(unskilled) 3.30 Nos. 215.00 1 Each 709.50
Add for MA @ 40% 0.40 1565.50 626.20
Rate for 10 sqm 10294.92
41 Providing cladding to internal walls / skirting to internal walls to 15 cm height / risers of steps with 8mm
thick mirror polished granite tiles length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand
and water etc., and Overheads & Contractors profit complete including seigniorage charges etc., complete for
finished item of work.(APSS No.701 &707)(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
Cost of granite tiles 8mm thick 10.50 sqm 780.00 1 sqm 8190.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 5.00 Kgs 18.00 1 Kg 90.00
Add water charges 1% 0.01 8675.49 86.75
B.LABOUR
Mason 1st class 2.10 Nos. 285.00 1 Each 598.50
Mason 2nd class 4.90 Nos. 260.00 1 Each 1274.00
Mazdoor(unskilled) 0.80 Nos. 215.00 1 Each 172.00
Add for MA @ 40% 0.40 2044.50 817.80
Rate for 10 sqm 11624.54
42 Providing skirting to internal walls to 12.50 cm height / risers of steps with Polished Shahabad/Tandur
stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand
and water etc., complete including seigniorage charges etc.,and Overheads & Contractors profit complete for
finished item of work.(APSS No.701 &707) (BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 2044.16 10 sqm 2248.58
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
Add water charges 1% 0.01 2644.06 26.44
B.LABOUR
Mason 1st class 0.96 Nos. 285.00 1 Each 273.60
Mason 2nd class 2.24 Nos. 260.00 1 Each 582.40
Mazdoor(unskilled) 3.10 Nos. 215.00 1 Each 666.50
Add for MA @ 40% 0.40 1522.50 609.00
Rate for 10 sqm 4802.00
43 Providing cladding to walls / skirting to internal walls / risers of steps with High Polished Granite 16 to 18
mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring stones set over
base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per
sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and Overheads &
Contractors profit complete for finished item of work.(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2000.00 1 sqm 21000.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 5.00 Kgs 18.00 1 Kg 90.00
Machine cutting charges
(S.No.822/BMM-V-12) 67.67 RM 8.00 1 RM 541.36
Add water charges 1% 0.01 22026.85 220.27
B.LABOUR
Mason 1st class 2.10 Nos. 285.00 1 Each 598.50
Man Mazdoor(Beldar) 4.90 Nos. 215.00 1 Each 1053.50
Add for MA @ 40% 0.40 1652.00 660.80
Rate for 10 sqm 24559.91
44 Cladding to walls / skirting to internal walls / risers to steps with 16mm to 18mm thick high polished
granite slabs black colour as approved by Engineer-in-charge of length not less than 2.43m set over base
coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., and Overheads & Contractors profit complete including
seigniorage charges etc., complete for finished item of work.(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite black 10.50 sqm 1700.00 1 sqm 17850.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 5.00 Kgs 18.00 1 Kg 90.00
Machine cutting charges
(S.No.822/BMM-V-12) 67.67 RM 8.00 1 RM 541.36
Add water charges 1% 0.01 18876.85 188.77
B.LABOUR
Mason 1st class 2.10 Nos. 285.00 1 Each 598.50
Man Mazdoor(Beldar) 4.90 Nos. 215.00 1 Each 1053.50
Add for MA @ 40% 0.40 1652.00 660.80
Rate for 10 sqm 21378.41
45 Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by
Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade
to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage
charges etc., and Overheads & Contractors profit complete for finished item of work. (BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles 10.50 sqm 332.00 1 sqm 3486.00
Sand for CM(1:5) base coat 0.12 cum 199.22 1 cum 23.91
Cement for CM(1:5) base coat 34.56 Kgs 5.50 1 Kg 190.08
Cement for slurry 33.00 Kgs 5.50 1 Kg 181.50
White cement for jointing & pointing 6.00 Kgs 18.00 1 Kg 108.00
Add water charges 1% 0.01 3989.49 39.89
B.LABOUR
Mason 1st class 0.77 Nos. 285.00 1 Each 219.45
Mazdoor(unskilled) 0.80 Nos. 215.00 1 Each 172.00
Add for MA @ 40% 0.40 391.45 156.58
Rate for 10 sqm 4577.41
A.MATERIALS :
Cost of cinder (BMT-A.17/ PAGE-11) 1.00 Cum 495.00 1 Cum 495.00
Cement 95.00 Kgs 5.50 1 Kg 522.50
B.LABOUR :
1st class Mason 0.10 Nos 285.00 1 Each 28.50
Mazdoor (unskilled) 2.36 Nos 215.00 1 Each 507.40
Add for MA @ 40% 0.40 535.90 214.36
Basic cost per 1cum 1767.76
47 Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 40mm size
(SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials
like cement, fine aggregate (sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all
materials including centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel
centering plates etc.,shuttering machine mixing, laying concrete, lift charges curing etc., and Overheads &
Contractors profit complete as per drawings but excluding cost of steel and it's fabrication charges for finished item
of work (APSS NO. 402 & 403) for Dummy columns. (BLDS-CSTN-3-13)
A.MATERIALS :
Cement 129.60 Kgs 5.50 1 Kg 712.80
40mm HBG metal 0.90 Cum 1166.55 1 Cum 1049.90
Sand 0.45 Cum 199.22 1 Cum 89.65
B.LABOUR :
1st class Mason 0.133 Nos 285.00 1 Each 37.91
2nd class Mason 0.267 Nos 260.00 1 Each 69.42
Mazdoor (unskilled) 3.60 Nos 215.00 1 Each 774.00
Add for MA @ 40% 0.40 881.33 352.53
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 248.40 1 hour 248.40
cum)capacity
Needle vibrator 40mm ( petrol ) 1.00 hour 120.40 1 hour 120.40
Add MA @ 25% on crew charges 0.40 221.30 88.52
Water(including for curing) 1.20 kl 77.00 1 kl 92.40
Basic cost per 1cum 3635.92
48 Providing Plinth protection with a bed of 100mm thick PCC(1:5:10) using 40mm size HB Granite metal and on
top of PCC, 20mm thick granolithic concrete flooring with CC(1:1:2) prop.using 6mm to 12mm size graded hard
granite machine crushed metal laid monolithically already laid, in alternate panels of size not exceeding 1.5 x 1.5
Mts. and providing 5mm thick glass strips between the pannels and finishing the top surface to required
smoothness and slopes including grooves, thread lining as directed by the Engineer - in - charge including cost
and conveyance of all materials to site including seigniorage charges, sales & other taxes on all materials and
operational & incidental and labour charges like mixing of cement concrete, laying, curing, lift charges etc.,and
Overheads & Contractors profit complete including cost of CC bed for finished item of work. (APSS No.701 & 710)
49 Supply and fixing of stainless steel (304 grade) hand railing as per approved drawing with top rail of 63 mm
dia. & 2 mm thick, vertical postsl of 50 mm dia and 2 mm thick and 20 mm dia. & 2 mm thick and two rows of 15
mm dia. & 1.6 mm thick medium class pipes including fixing verticals to 75 mm dia. base plates using bonding
agent and anchor fastner and welding including fixing railing, buffing, polishing all members of the railing
thouroughly, lacquer finishing to presement seamless finish including cost and conveyance of all materials,
welding charges cost of all consumables, labour charges etc., and Overheads & Contractors profit complete for
finished item of work.
50 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure
of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other accessories and
fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site,
operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors
profit complete for finished item of work. (APSS No. 1328)
51 White washing two coats with Suryacem to ceiling to give an even shade after thouroughly brushing the
surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges
and incidental such as scaffolding , lift charges etc., and Overheads & Contractors profit complete for finished item
of work but excluding conveyance of materials.(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
Surya cement 2.00 kgs 350.00 25 kgs 28.00
B.LABOUR :
Painter 1st class 0.063 Nos. 285.00 1 Each 17.96
Painter 2nd class 0.147 Nos. 260.00 1 Each 38.22
Mazdoor(unskilled) 0.32 Nos. 215.00 1 Each 68.80
Add for MA @ 40% 0.40 124.98 49.99
Sundries including brushes , ladders
etc., @ 1% 1% 202.97 2.03
Rate per 10 sqm 204.99
Overheads & Contractors Profit @14% 0.14 204.99 28.70
Rate per 10 sqm 233.69
Rate per 1 sqm 23.37
Say 23.00
52 Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper Acrylic based
(Asian/Berger/Nerolac/Saicoat/Indocem) over a base coat of cement primer water based interior Gr-1
(Asian/Berger/Nerolac/Saicoat/Indocem) as approved by Engineer-In-Charge, making 3 coats in all to give an
even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials,
including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and
Overheads & Contractors profit complete for finished item of work as per APSS 911 for internal walls. (BLD-CSTN-
12-1)
Unit = 10 Sqm
Cost of cement primer(BMT-J.01) 0.50 Ltrs 100.00 1 Ltr 50.00
Painter 1st class 0.08 Nos. 285.00 1 Each 22.80
Painter 2nd class 0.19 Nos. 260.00 1 Each 49.40
Cost of washable oil bound distemper 1.70 Ltrs 60.00 1 Ltr 102.00
Painter 1st class 0.36 Nos. 285.00 1 Each 102.60
Painter 2nd class 0.84 Nos. 260.00 1 Each 218.40
Add for MA @ 40% 0.40 393.20 157.28
Sundries including brushes , ladders
etc., @ 1% 0.01 702.48 7.02
709.50
Overheads & Contractors Profit @14% 0.14 709.50 99.33
Rate per 10 sqm 808.84
Rate per 1 sqm 80.88
Say 81.00
53 Painting to old walls with 2 coats of ready mixed oil bound wahsable distemper Acrylic based
(Asian/Berger/Nerolac/Saicoat/Indocem) as approved by Engineer-In-Charge, to give an even shade after
thourughly brushing the old surface to remove all dirt and remains of loose powdered materials, including cost and
conveyance of all materials to work site and all operational, incidental, labour charges etc., and Overheads &
Contractors profit complete for finished item of work as per APSS 911 for internal walls. (BLD-CSTN-11-10)
Unit = 10 Sqm
Cost of washable oil bound distemper 1.70 Ltrs 60.00 1 Ltr 102.00
Painter 1st class 0.36 Nos. 285.00 1 Each 102.60
Painter 2nd class 0.84 Nos. 260.00 1 Each 218.40
Add for MA @ 40% 0.40 321.00 128.40
Sundries including brushes , ladders
etc., @ 1% 0.01 551.40 5.51
556.91
Overheads & Contractors Profit @14% 0.14 556.91 77.97
Rate per 10 sqm 634.88
Rate per 1 sqm 63.49
Say 63.00
54 Painting to new walls with 2 coats of water proof cement paint (Snowcem/Indocem) of shade as approved by
the Engineer-In-Charge over a base coat of aproved cement primer waterbase interior Gr-1
(Asian/Berger/Nerolac/Saicoat/Indocem)making 3 coats in all to give an even shade after thourughly brushing the
surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials
to work site and all operational, incidental, labour charges etc., and Overheads & Contractors profit complete for
finished item of work as per SS 912 .(BLD-CSTN-12-1 & 12-5)
55 Painting to old walls with 2 coats of water proof cement paint (Snowcem/Indocem) of shade as approved by
the Engineer-In-Charge to give an even shade after thourughly brushing the surface to remove all dirt and remains
of loose powdered materials, including cost and conveyance of all materials to work site and all operational,
incidental, labour charges etc., and Overheads & Contractors profit complete for finished item of work as per SS
912.(BLD-CSTN-12-4 )
56 Painting with plastic emulsion (Asian/Berger/Nerolac/Saicoat/Indocem) to exterior / interior faces of new walls
two coat of approved make shade and colour over primer coat with cement primer water based interior Gr-I
( Asian/Berger/Nerolac/Saicoat/Indocem) including cost and conveyance of materials like Plastic Emulsion paint,
white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as
preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work
(APSS No.910, 911&1201) in all floors. (BLD-CSTN-12-2& 12-11-187)
57 Painting to new wood work and flush shutters with lappam finish , over a primary coat
( Asian/Berger/Nerolac/Saicoat/Indocem) and painting two coats of synthetic enamel paint Grade-I
(Asian/Berger/Nerolac/Indocem) of approved shade including cost and conveyance of all materials to site cost of
primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish
including sales & other taxes on cost of all materials etc.and Overheads & Contractors profit complete (APSS
No.1200, 1207 & 1211) in all floors.(BLD-CSTN-12-6 & 12-12-195)
59 Painting primer coat on new wood work using red oxide Iron primer paint grade - I of approved brand
including cost and conveyance of all materials to site , all labour charges etc.and Overheads & Contractors profit
complete in all floors.(APSS No. 1201, 1212 & 1207).(BLD-CSTN-12-7)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 90.00 1 Ltr 63.00
B.LABOUR :
1st Class Painter 0.21 Nos. 285.00 1 Each 59.85
2nd Class Painter 0.49 Nos. 260.00 1 Each 127.40
Add for MA @ 40% 0.40 187.25 74.90
Sundries including brushes , ladders
etc., @ 1% 0.01 325.15 3.25
328.40
Overheads & Contractors Profit @14% 0.14 328.40 45.98
Rate per 10 sqm 374.38
Rate per 1 sqm 37.44
Say 37.00
60 Painting two coats with synthetic enamel paint Gr-I ( Asian/Berger/Nerolac/Indocem) to new iron work
including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour
charges etc.,and Overheads & Contractors profit complete for finished item of work. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 1.10 Ltr 170.00 1 Ltr 187.00
B.LABOUR :
1st Class Painter 0.33 Nos. 285.00 1 Each 94.05
2nd Class Painter 0.77 Nos. 260.00 1 Each 200.20
Add for MA @ 40% 0.40 294.25 117.70
Sundries including brushes , ladders
etc., @ 1% 0.01 598.95 5.99
604.94
Overheads & Contractors Profit @14% 0.14 604.94 84.69
Rate per 10 sqm 689.63
Rate per 1 sqm 68.96
Say 69.00
61 Painting two coats with synthetic enamel paintGr-I ( Asian/Berger/Nerolac/Indocem) to old iron work
including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour
charges etc.,and Overheads & Contractors profit complete for finished item of work. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-198)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 0.90 Ltr 170.00 1 Ltr 153.00
B.LABOUR :
1st Class Painter 0.33 Nos. 285.00 1 Each 94.05
2nd Class Painter 0.77 Nos. 260.00 1 Each 200.20
Add for MA @ 40% 0.40 294.25 117.70
Sundries including brushes , ladders
etc., @ 1% 0.01 564.95 5.65
570.60
Overheads & Contractors Profit @14% 0.14 570.60 79.88
Rate per 10 sqm 650.48
Rate per 1 sqm 65.05
Say 65.00
62 Supply and application of two coats of Altek/Sai coat/Neon Super fine, one coat of Altek/Sai coat/Neon water
based cement primer and two coats of Altek Flora/Sai Coat/Neon/Indocem Super track for ceiling and internal
walls (emulsion paint) including cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc.,and Overheads & Contractors profit complete for finished item of work
63 Supply & application of One Coat Water based Cement Primer, One coat of Deco Orient Base Exterior
Texture & two coats of Alltek Harmony (Acrylic Emulsion paint exterior grade) for external walls including
cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges
etc.,and Overheads & Contractors profit complete for finished item of work
64 Supply & Application of One Coat of Altek / Sai coat / Neon / Indocem Water Based Cement Primer & Two
Coats of Altek Alltimate / Sai coat / Neon weather flex for exterior walls (Acrylic Emulsion Paint Exterior
grade) including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all
labour charges etc.,and Overheads & Contractors profit complete for finished item of work
65 Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and
applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean &
wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs,
sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No
emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved
brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of
approved brand melamine including cost & labour charges , emery papers, cost of thinner & melamine polish of
approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent
etc.,Overheads&Contractror profit complete for finished item of work
Rate as per SSR (2008-09) - S.No.384 1.00 sqm 356.00 1.00 sqm 356.00
Overheads & Contractors Profit @14% 0.14 356.00 49.84
Rate per 1 sqm 405.84
Say 406.00
66 Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-
Charge including cost and conveyance of materials to site and labour charges etc., Overheads & Contractors
profit complete for finished item of work in all floors.
67 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together
through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft
of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates
and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs
complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., Overheads &
Contractors profit complete for finished item of work as per special spn: 1108
68 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre
,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the
collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for
the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers,
handles, all accessories all fixtures and painted with one coat of approved steel primer etc., Overheads &
Contractors profit complete for finished item of work as per special spn 1105
69 Providing Expansion joint treatment with poly sulphide compound of approved make of finished size 25 x
12mm including making of 25mm x 12mm groove and primer coat over finished groove with finishing of edges true
to straight line and level over the finished surface of expansion joint including cost and conveyance of all materials
to site, all incidental, operational, labour charges etc.Overheads & Contractors profit complete for finished item of
work as per approved drawing (for all floors on top of slab i.e in the flooring and for internal vertical joints of
grooves in dadooing surface)
As per market rate 1.00 RM 370.00 1 RM 370.00
Rate per 1 RM Say 370.00
70 Providing and fixing of Expansion joint filler board for Buildings , Columns , Beams and Slabs " Armour
Board " Sillfill 25mm thick including cost and conveyance of all materials to site, all incidental, operational,
labour charges etc.Overheads & Contractors profit complete for finished item of work as per approved drawing for
all floors
Rate as per SSR - 830 (BMT-U.05) 1.00 Sqm 327.00 1 Sqm 327.00
Overheads & Contractors Profit @14% 0.14 327.00 45.78
Rate per 1 sqm 372.78
Say 373.00
1.70mts 1.80mts Alround M.S flat of
size 25 x 6mm
71 Providing and fixing of 24 gauge alluminium sheet over expansion joint groove of width 15cm fixed to walls /
columns at one edge and resting over the other block walls/columns concealing expansion joint with slotted holes
for free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished surface of
expansion joint and wall face using sheet metal screws with nylon receiver complete including cost and
conveyance of all materials to site, all incidental, operational, labour charges etc.Overheads & Contractors profit
complete for finished item of work as per approved drawing (for all floors for vertical joints and bottom of slab)
72 Supplying and fixing aluminium composite cladding 4mm thick of approved make (Alucopanel, alucobonel,
Reynobond, Lennox Durabuid, Alstrong legame, Alpolic, Alcomat, Alshine etc.,) with skin material 0.25 mm thick
aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis
frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on
structural steel work including necessary accessories complete in all respects including all scaffolding and labour
charges etc., Overheads & Contractors profit complete for finished item of work but excluding cost of structural
steel fabrication, if any,
73 Providing and Fixing Structural Glazing( NCL or Equivalent Structural Glazing) fabricated from Roll formed
sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS
277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304
grade stainless steel of 0.6mm thick as per the design requirement & calculations as given in IS: 875. Primer coat
with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back
coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick.
The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section,
stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm,
Glass holding section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective
glass. Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal,
vertical to slab, to fix verticals at top & bottom as per site requirement.
Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used.
Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive
of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc.
and scaffolding charges, form work etc. Overheads & Contractors profit complete for finished item of work.
74 Providing and Fixing Top Hung shutters (NCL or equivalent) in Structural Glazing fabricated from Roll
formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as
per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of
304 grade stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour
coated steel/powder coated sections as per the design requirement. Design calculations are made to suit wind
pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd
backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The outer frame
should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm, stiffener section
should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2 Nos. for
each shutter, Aluminium Handle – 1 no. for each shutter. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding charges, form work etc. complete for finished item
of work.(The rate is inclusive of Overheads&Contractor profit)
Rate as per SSR S.No.797 (BMT-
Q.08) 1.00 sqm 4226.00 1 sqm 4226.00
Overheads & Contractors Profit @14% 0.14 4226.00 591.64
Rate per 1 sqm 4817.64
Say 4818.00
75 Supply and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.6 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick,
finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer.
Section for outer frame should be 46 x 52 mm, section for mullion should be 46 x 70 mm and section for beading
should be 18 x 25 mm. The Glazing should be paneled with 5 mm thick plain float Glass with Ethyl Propylene
diameine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket. Centre
mullions are to be fixed suing mullion cap. Handle made of high grade Aluminium powder coated and nylon
receiver. Gaskets made of Ethyl propylene Diamine Monomer (EPDM) Corner brackets made of CRCA with zinc
phosphating. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete / masonry
wall be means of self expanding screws. & complete for finished item.(The rate is inclusive of
Overheads&Contractor profit)
Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm), 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x 4'-0" (914.4x1219.2mm) grid
outer frames section size of 46 x 52 mm
Rate as per SSR S.No.797 (BMT-
Q.08) 1.00 sqm 4317.00 1 sqm 4317.00
Overheads & Contractors Profit @14% 0.14 4317.00 604.38
Rate per 1 sqm 4921.38
Say 4921.00
76 Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling
system manufactured by M/s Arm strong world Industries using hot dipped Galvanized Steel section exposed
surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched
cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and
wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c
in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm
thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished
of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of
standing of frame work exposing roof making complete for finished item of work.(The rate is inclusive of
Overheads&Contractor profit)
Rate as per S.No.592 of SSR 2008-09 1.00 sqm 720.00 1 sqm 720.00
Overheads & Contractors Profit @14% 0.14 720.00 100.80
820.80
Say 821.00
77 Providing and fixing of 75mm thick EVEREST SOLID WALL PANEL Sandwich panels made of light Weight
FRACC two 4mm thick non-asbestos fiber reinforced cement sheets on either side of the lightweight concrete core
composed of Portland cement binders with tongue and groove arrangement. The bottom of the panel shall be
fixed to the floor channel made up of 1 mm thick GI channels of size 14x75x25 mm fixed to the existing floor with
6x60mm nylon self expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of
1mm thick GI Channel of size 38x75x38mm duly fixed to the existing ceiling with 6x60mm nylon self expansion
screws at 600 mm C/C. All the tongue and groove joints of the panels have to be properly cleaned and both the
panels have to be fixed by applying the mixture of fly ash and sodium silicate in between and Everest jointing
compound all the exposed joints. The rate includes cost of 75mm EVEREST SOLID WALL PANEL panels, Gl
Floor and ceiling channel. The panels can be flushed by using paper tape and Everest jointing compound all
complete.(The rate is inclusive of Overheads&Contractor profit)
78 Roofing with corrugated GI sheets as per IS 277 (1.25mm thick) fixed with GI 'J' bolts&nuts 8mm dia. With
bitumen & GI limpet washers filled with white lead including a coat of approved steel primer and two coats of
approved paint on over lapping of sheets complete ( up to a pitch of 60 degees ) and seigniorage charges , turn
over tax etc., complete excluding the cost of purlins, rafters , trusses including cost and conveyance of all
materials , Overheads & Contractors profit for finished item of work.(BLD-CSTN-10-3)
79 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS
Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational,
incidental, labour charges , Overheads & Contractors profit for finished item of work.etc., complete for finished item
of work for stair case head room roof.
Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick CRCA section, size should
be 50 x 60 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be
painted with one coat of primer and finished painted with pure polyester paint. The frame should be
BLD-CSTN- provided with approved quality butt hinges of 3 Nos. Complete for finished item of work.: Single shutter 3'-
1
13-201 0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 75 mm and Flush door shutters, solid bond
wood block board type with commercial ply on both faces.: 35 mm thick and fixing the door frame to shutter
and fixing the fixtures to door shutter like 2 No's aluminium tower bolts, 2 No's Aluminium door handles, 2
No's Aluminium Alldrop and 2 Nos Aluminium door stoppers. (Door 1.06 x 2.13 m)
UNIT: EACH
A) MATERIAL:
Aluminium Tower Bolt-10 mm Bolt (IS:204) 150 mm Each 2.00 69.00 138.00
Long (BMT-G.08)
Aluminium Door Handles (IS:208) 125 mm Long Each 2.00 76.00 152.00
(BMT-G.33)
Aluminium Aldrop (IS:2681) 300 mm long (BMT-G.42) Each 2.00 258.00 516.00
Heavy duty Aluminium Door stopper (BMT-G.57) Each 2.00 38.00 76.00
Flush door shutters, solid bond wood block board type Sqm 2.05 734.00 1504.70
with commercial ply on both faces.: 35 mmthick
conforming to IS:2202 (BMT-N.17)
Supplying & fixing of Door frame made of roll formed RMT 5.32 232.00 1234.24
section of 1.25 mm thick CRCA section, size should be
50 x 60 mm with 32 mm rebate. The corner of the
frame should be welded. The frame should be painted
with one coat of primer and finished painted with pure
polyester paint. The frame should be provided with
approved quality butt hinges of 3 Nos. Complete for
finished item of work.: Single shutter 3'-0" x 7'-0"
(914.4x2133.6mm) outer frame section size of 50 x 75
mm (BMT-N.56)
Total 3620.94
Overheads & Contractors Profit @14% 14% 506.93
Total Rate EACH 4127.87
NCL or Equivalent PRE- PAINTED STEEL, WINDOWS, VENTILATORS & DOOR FRAMES. Supply and
fixing of windows & top Hung and fixed louvered ventilators made of pre - painted steel (base steel as per
IS 513 of -0.6 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with
epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back
coated with 5-7 microns thick alkyd backer. Section for outer frame should be 46 x 52 mm section for
shutter should be 46 x 46 mm section for mullion should be 46 x 70 mm, and section for beading should be
18 x 25 mm and section for louvered ventilation should be 33 x57mm Box section. The windows should be
panelled with 5mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene
BLD-CSTN-
2 Diamine monomer Gasket (EPDM). The sections are to be cut to length mitre joined with corner brocket
13-231
centre mullions are to be fixed using mullion cap. Handle made of high grade aluminium powder coated
and nylon receiver. Gaskets made of Ethyl propylene Diamine monomer (EPDM). Corner brackets made of
CRCA with Zinc Phosphate. Mullion caps made of glass filled nylon. The above frames should be fixed to
the concrete /masonry wall by means of self expanding screws. including 10 mm square guard bars with 6"
pitch complete for finished item of work.
Centre fixed both side openable shutter 3'-0" x 4'-0" (914.4x1219.2mm) outer frame section size of
46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed
beading section size of 18 x 25 mm
Unit: 1 Sqm
A) MATERIAL:
Centre fixed both side openable shutter 3'-0" x 4'-0" Sqm 1.00 5195.00 5195.00
(914.4x1219.2mm) outer frame section size of 46 x 52
mm shutter frame section size of 46 x 46 mm Mullion
section size of 46 x 70 mm fixed beading section size
of 18 x 25 mm (BMT-P.10)
Total 5195.00
Overheads & Contractors Profit @14% 14% 727.30
Total Rater per Sqm 5922.30
BLD-CSTN
NCL or Equivalent PRE- PAINTED STEEL, WINDOWS, VENTILATORS & DOOR FRAMES. Supply and
fixing of windows & top Hung and fixed louvered ventilators made of pre - painted steel (base steel as per
IS 513 of -0.6 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with
epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back
coated with 5-7 microns thick alkyd backer. Section for outer frame should be 46 x 52 mm section for
shutter should be 46 x 46 mm section for mullion should be 46 x 70 mm, and section for beading should be
18 x 25 mm and section for louvered ventilation should be 33 x57mm Box section. The windows should be
BLD-CSTN- panelled with 5mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene
3
13-251 Diamine monomer Gasket (EPDM). The sections are to be cut to length mitre joined with corner brocket
centre mullions are to be fixed using mullion cap. Handle made of high grade aluminium powder coated
and nylon receiver. Gaskets made of Ethyl propylene Diamine monomer (EPDM). Corner brackets made of
CRCA with Zinc Phosphate. Mullion caps made of glass filled nylon. The above frames should be fixed to
the concrete /masonry wall by means of self expanding screws. including 10 mm square guard bars with 6"
pitch complete for finished item of work.
Ventilators: Top Hung 4 '-0" x 2'-0" (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter
frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm
Unit: 1 Sqm
A) MATERIAL:
Ventilators: Top Hung 4 '-0" x 2'-0" (1219.2x609.6mm) Sqm 1.00 5370.00 5370.00
outer frame section size of 46 x 52 m shutter frame
section size of 46 x 46 mm Mullion section size of 46 x
70 mm (BMT-P.18)
Total 5370.00
Overheads & Contractors Profit @14% 14% 751.80
Total Rate per 1 Sqm 6121.80
ABSTRACT ESTIMATE (Mechanical Equipment)
Sl.
Description Qty Rate/per Amount
No
75 HP KSB make submersible motor-pump
1 3 Nos 295000 Each 885000.00
set
2 8" dia GI Pipes 100 Rmt 4100 Rmt 410000.00
35 sqmm PVC flat flexible 3 core copper cable
3 300 Rmt 750 Rmt 225000.00
400 sqmm 3Core aluminum cable from 250
4 KVA transformer to the panel board in pump 50 RMT 3530 Rmt 176500.00
house
Structural steel platform for extension pump
set in addition to existing submersible pump
set and in delivery lines from ground level
reservoir unit to main delivery line with
G.I.Pipe line at EL+1375 ft by Using Structural
steel platform of size 2.50 x 1.50 xO.6 mts
suitable for 60 HP centrifugal pump base and
providing G.I.Sheet shed of size 2.50 ft x. 10.0
ft with M.S.Angles claded with J-bolts and
nuts, cost of G.I.sheets, Structural steel
5 sections such as M.S.Beams, angles, 1 Job 420000 Job 420000.00
channels , plates and anchor rods etc,
including fixing Anchor rods 20 dia x 1.50 mts
long, 1.20 m in the concrete. 0.3 rn outside
including drilling 30 mm dia holes etc.,
including labour charges, hire charges,
materials charges all leads and lifts etc.,
complete and as directed by the department.
Total 3014850.00
DETAILED ESTIMATE (GLSR) @ +1370FT
Sl.
Length Breadth Depth
No Description Nos Qty
(m) (m) (m)
:
Clearing thick jungle growth (less than 50 percent open space) including bushes up to 30 cm/ parthenium and other
1
weeds including burning or disposing off the same as directd etc, complete
1 x 1 50.00 40.00 2000.00
Earth work excavation for foundations in hard rock (requiring blasting) and depositing on bank for all lifts and with an
initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting,
2
planking, strutting etc., and Overheads & Contractors profit complete for finished item of work including seigniorage
excluding de watering charges etc., as per SS 20 B(APSS 308) for foundation of GLSR
1 x 1 p*18.5*18.5/4 - 1.00 268.80
Earth work excavation for foundations (Manual Means) in ordinary soils and depositing on bank with an initial lead of
10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking,
3
strutting etc., and Overheads & Contractors profit complete for finished item of work including seigniorage excluding
dewatering charges etc., as per SS 20 B(APSS 308) for base slab foundation
1 x 1 p*17.65*17.65/4 - 0.65 159.03
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine crushed Trap from approved quarry including cost and conveyance
of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other
4
taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring
bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and Overheads & Contractors profit
complete for finished item of work. (APSS No. 402) for foundation of GLSR
1 x 1 p*17.65*17.65/4 - 0.30 73.40
RCC M- 20 mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded
machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges,
5
sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing,
laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,
including centering, shuttering.
Base Slab 1 x 1 p*17.05*17.05/4 - 0.35 79.87
Painting with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, One Coat (All
Colours) of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains
9
of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift
charges etc., complete for finished item of work for outside of circular wall, ring beam, and over the roof slab
Qty
Cum
Cum
Cum
Cum
nforcement in foundation complete as per drawings and technical specifications
laps and wastage, where they are not welded including cost and conveyance
es of steel , placing in position, tying with binding wire, all tools etc., and
e for finished item of work ( APSS No.126 ) for base slab, side walls, ring beam
Kgs
or inside walls in superstructure including cost and conveyance of all materials
ncluding seigniorage charges, sales & other taxes on all materials, and all
ials and including cost of all labour charges for mixing mortar, finishing, curing
nd Overheads & Contractors profit complete for finished item of work for top of
portion
sqm
ncluding cost and conveyance of all materials like cement, sand, water etc., to
es & other taxes on all materials, and all operational, incidental charges on
charges for mixing mortar, finishing, curing as directed by Engineer-in-charge
complete for finished item of work for outside of circular walls, ring beam and
sqm
and approved Water Proof Cement Paint over Priming Coat, One Coat (All
ven shade after thoroughly brushing the surface to remove all dirt and remains
cost of all materials, labour charges and incidental such as scaffolding, lift
of work for outside of circular wall, ring beam, and over the roof slab
sqm
ver of size 600mmx including cost and convenience, fixing at top of GL storage
No's
width inside the service reservoir from bottom and top in CC/RCC as the case
veyance of all materials etc., complete
No.
ors of approved pattern with necessary wire gauge, pulley including cost of
No.
08 dia at GLR tanks
No's
arth (excluding rock) with a lead of 50 m in trenches, sides of foundations and
xceeding 15cm thick, watering and ramming including cost and conveyance of
incidental, labour charges, hire charges of T&P etc., and Overheads &
em of work (APSS NO.309&310)
Cum
chamber of required guage as per specification connecting the existing 16" dia
lso at delivery end to the GI pipe lines of 8" dia including the concrete base
and also all incidental labour and material charges for finished item of work
excluded)
Nos
ABSTRACT
Name of Work : Construction of 2 Lakh gallons (Water) Capacity Ground Level Service
Reservoir in between View Point pumping stage and Filter House, NSRS Srisailam Project,
Kurnool.
Length Length of
Nos of Dia Area Spacing Number of Qty
Location (m) for Each Bar
Directions (mm) (Sqm) (mm) Bars (kgs)
distribution (m)
Base Slab Bottom 2 10 0.00007850 17.55 300.00 60.00 10.53 778.29
Base Slab Top 2 10 0.00007850 17.55 200.00 89.00 10.53 1154.47
Circular Wall (Vertical outer face) 1 12 0.00011304 51.34 250.00 206.00 6.23 1137.91
Circular Wall (Vertical inner face) 1 12 0.00011304 50.55 125.00 405.00 5.23 1877.77
Circular Wall(Hor.Outer) 1 12 0.00011304 3.00 300.00 11.00 51.34 501.12
Circular Wall (Hor.Inner) 1 12 0.00011304 5.00 300.00 18.00 50.55 807.48
Roof Slab (Bottom & Top) 1 10 0.00007850 18.90 200.00 96.00 18.90 1118.08
Haunch(Radial) 1 10 0.00007850 51.34 200.00 258.00 4.00 635.94
Ring Beam(main) 1 20 0.00031400 - - 6.00 53.07 784.81
Ring Beam (Stirrups) 1 8 0.00005024 53.07 200.00 266.00 2.30 241.28
Total 9037.16
Add 5% extra 451.86
Grand Total 9489.02
or say 9500.00
QUANTITY OF STRUCTURAL STEEL REQUIRED FOR LADER INSIDE THE G.L.S.R AT NSRS SRISAILAM PROJECT
Length of
Nos of Thickness Width Length Spacing Number of Qty
Location Each step
Directions (mm) (m) (m) (mm) Bars (kgs)
(m)
3 1No. NRV P1.6, ISS 5312 For sump well at El +495 ft Make : Kirloskar
As Directed by the Rupees Fifty Rupees Fifty
50000/- 1No. 50000
Department Thousand only thousands only
4 28Nos. Supply and fixing of 6 W LED Slim Panel Round /Square suitable for
Recessed / Surface mounting made of diecast alluminium body with
powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec
13) : 2012 , operating voltaGE-Venture ranGEVenture of 150 to 265
Volts AC, P.F > 0.9, SurGEVenture protection: 2KV,THD<10%, with
high power LED's having efficacy of > 100lumins/watt,CCT:
3000K - 5700K, minimum CRI>70, .etc., complete As directed by Rupees Five Rupees Fourteen
a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / 500/- 1 NO. 14000
the Dept. Hundred only Thousands only
Bajaj / Havells /Halonix/Jaquar/HPL/GM / GreenLites /
GoldMedal/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG/Everlight.
16 1 packet 25 Sq mm long neck copper legs (100 pieces) As Directed by the Rupees Two Rupees Two
2000/- 1Packet. 2000
Department thousand Only Thousand Only
17 50Kgs Nylon ropes Rupees Two Rupees Twel
As Directed by the
250/- Hundred and 1Kgs 12500 Thousand Five
Department
Fifty Only Hundred and only
I Sri / Smt. / M/S. S.K.KHADAR HUSSAIN, H.NO.2-9-23-6/1,Sundipenta. Srisailam Project Kurnool dist,do hereby express my willingness to execute
the aforesaid work as per the conditions, standards, specifications rules, regulations, etc. stipulated in the tender schedules at an overall tendered
percentage of (-) 0.05% less over the estimate value of contract cost. The tendered cost of the work is Rs.1,71,934/- (Rupees One Lakhs eventy One
thousand Nine Hundred thiryt four only)
Executive Engineer
Contractor Dam Maintenance Division, NSRSS
Project.
GENERAL ABSTRACT
Name of Work : Construction of Third pumping stage behind
workshop at EL +1370.00ft in between view point pumping stage and
filter house (inclusive of pump house, GLSR, Approach Road,
Electrical equipment and 75HP submersible motors and related
accessories)
SI. Amount
Description of Work Qunatity
No. (Rs.)
B. MACHINERY:
Sl No Description Unit Quantity Rate Amount
in Rs. in Rs.
1 Angle dozer 90 hp Hour 6.06 1753.10 10623.79
Fuel / Energy charges Hour 6.06 571.40 3462.68
2 Shovel 0.5 cum Hour 8.00 1028.90 8231.20
Fuel / Energy charges Hour 8.00 445.50 3564.00
3 Tippers 5 cum 3 Nos Hour 48.00 456.20 21897.60
Fuel / Energy charges Hour 48.00 280.70 13473.60
4 Pump 5 hp ( diesel ) Hour 3.00 10.40 31.20
Fuel / Energy charges Hour 3.00 74.30 222.90
5 Water tanker 8000 ltr Hour 6.00 411.00 2466.00
Fuel / Energy charges Hour 6.00 280.70 1684.20
6 Vibratory pad foot roller 8 tonne Hour 6.16 1367.10 8421.34
Fuel / Energy charges Hour 6.16 965.30 5946.25
7 Sundries LS 5.00 41.00 205.00
Total hire charges of Machinery Rs: 150800.00
C. LABOUR:
Sl No Description Unit Quantity Rate Amount
in Rs. in Rs.
1 Crew for Dozer Hour 6.06 187.20 1134.43
2 Crew for Shovel Hour 8.00 187.20 1497.60
3 Crew for Tipper Hour 48.00 140.40 6739.20
4 Crew for Pump Hour 3.00 87.40 262.20
5 Crew for Water tanker Hour 6.00 140.40 842.40
6 Crew for Roller Hour 6.16 209.00 1287.44
7 work inspector Day 2.00 335.00 670.00
8 mazdoor Day 4.00 280.00 1120.00
Total cost of Labour Rs: 13553.27
ABSTRACT:
A. Cost of Materials including seignorage charges Rs: 0.00
B. Hire charges of Machinery Rs: 150800.00
C. Cost of Labour Rs: 13553.27
Total Rs: 164353.27
D. Add for contractor's profit and overheads on (A+B+C) 14% Rs: 23009.46
Total cost for 677.28 cum Rs: 187362.73
Rate per cum (A+B+C+D)/677.28 Rs. 276.60
“ AME For operation and maintenance of dewatering in dam galleries of N.S.R.S.
Srisailam Project for the year 2020-21.”